|
|
FA800 Horizontal machining center
Work Area:
Axis travel X (column) 53.1 in (1,350 mm)
Axis travel Y (manufacturers of spindle head) 45.2 in (1,150 mm)
Axis travel Z (table) 45.2 in (1,150 mm)
Spindle nose to rotary table center 7.87 - 53.1 in (200 - 1,350 mm)
Spindle nose to top face of pallet 1.97 - 47.2 in (50 - 1,200 mm)
Workpiece swing ø51.2 x 51.2 in (ø1,300 x 1,300 mm)
Spindle:
Speed (infinitely variable) 35 - 6,000 rpm (opt 6,000 or (2) 15,000 rpm)
Drive motor power AC 40 hp (30 kw) for 30 min.
AC 30 hp (22 kw) continuous
Drive motor power
(optional 6,000 rpm geared head) AC 60 hp (45 kw) interim
AC 50 hp (37 kw) continuous
Drive motor power
(optional 15,000 rpm) AC 30 hp (22 kw) interim
AC 25 hp (18.5 kw) continuous
Drive motor power
(optional 15,000 rpm) AC 40 hp (30 kw) interim
AC 33.5 hp (25 kw) continuous
Spindle nose taper ISO R297 #50
Spindle diameter (front industrial bearing ID) ø4.33 in (ø110 mm)
Coolant through the spindle Standard
Pallets:
Pallet size 31.5 x 31.5 in (800 x 800 mm)
Pallet height from floor 51.2 in (1,300 mm)
Rotary table index increments 1 deg (0.001 NC opt)
Indexing time, 90 degrees 5 sec
Indexing time, 180 degrees 7.2 sec
Pallet changing time 37 sec (42 sec NC)
Max load on pallet 5,500 lb (2,500 kg)
Control: GE Fanuc 16i MB
Tool Magazine:
Standard storage capacity 60 std; Opt 121 *Contact Toyoda engineering for magazine options from 134 - 326 tools.
Tool selection Fixed pocket, random access
Maximum tool weight 77 lb (35 kg)
Maximum tool size
(diameter x length) ø4.72 x 21.7 in (ø120 x 550 mm)
T-Bar ø15.75 in (ø400 mm)
Tool change time, tool-to-tool 2 - 5 sec
Tool change time, chip-to-chip 7.9 - 8.8 sec
Type of tool CAT #50
Feed:
Rapid traverse (X, Y and Z) 944 ipm (24 m/min)
Cutting feedrate 0.04 - 944 ipm (0.001 - 24 m/min)
Accuracy:
Linear positioning accuracy ± 0.00012 in (0.003 mm) full stroke
Linear repeatability ± 0.00006 in (0.0015 mm)
Rotary table index accuracy ± 3 arc sec
Machine Size:
Machine height 152 in (3,866 mm)
Floorspace 274 x 178 in (6,950 x 4,530 mm)
Net weight 61,100 lb (27,715 kg)
|
|
FH550SX Horizontal machining center
Work Area:
Axis travel X (column) 29.53 in (750 mm)
Axis travel Y (supplier of spindle head) 31.5 in (800 mm)
Axis travel Z (table) 33.46 in (850 mm)
Spindle nose to rotary desk center 5.9 - 39.37 in (150 - 1,000 mm)
Spindle nose to top face of pallet 3.94 - 35.43 in (100 - 900 mm)
Workpiece swing ø33.46 x 46.0 in (ø850 x 1,168 mm)
Spindle:
Speed (infinitely variable) 6,000 rpm (opt 50 - 15,000 rpm)
Drive motor power 40 hp (30 kw) interim
30 hp (22 kw) continuous
(opt 33.5 hp (25 kw) continuous)
Spindle nose taper #50
Spindle diameter (front bearing supplier ID) ø4.33 in (ø110 mm)
Pallets:
Pallet size 21.65 x 21.65 in (550 x 550 mm)
Pallet height from floor 47.24 in (1,200 mm)
Rotary table index increments 1 deg (0.001 NC opt)
Indexing time, 90 degrees 2 sec
Indexing time, 180 degrees 2.4 sec
Pallet changing time 9.5 sec
Max load on pallet 1,760 lb (800 kg)
Control: GE Fanuc 31i
Tool Magazine:
Standard storage capacity 60 std; Opt 121; 134 - 326
Tool selection Fixed pocket, random access
Maximum tool weight 59.5 lb (27 kg)
Maximum tool size
(diameter x length) ø4.72 x 21.5 in (ø120 x 545 mm)
Tool change time, tool-to-tool 2 - 3.3 sec
Tool change time, chip-to-chip 3.7 - 5 sec
Feed:
Rapid traverse (X, Y and Z) 2,362 ipm (60 m/min)
Cutting feedrate 0.04 - 2,362 ipm (0.001 - 60 m/min)
Acceleration 0.7 G
Accuracy:
Linear positioning accuracy ± 0.00012 in (0.003 mm) full stroke
Linear repeatability ± 0.00008 in (0.002 mm)
Rotary table index accuracy ± 3 arc sec
Machine Size:
Machine height 126 in (3,200 mm)
Floorspace 281 x 123 in (7,132 x 3,120 mm)
Net weight 41,000 lb (18,600 kg)
|
|
Kitamura's HX250iF Horizontal machining center offers a compact footprint with full 4th axis capabilities and the advantages of an amazing 1.8 second pallet rotation for higher productivity in your medium and long run small parts machining applications.
The Mycenter-HX250iF employs a highly rigid, dual contact 15,000rpm manufacturers of spindle that is unriavled by others in a #30 taper spindle configuration. The most difficult operations such as 0.2mm (0.008") diameter drilling can be performed with the greatest accuracy and highest cutting speed.
Maximum workpiece size is 13.8(Diameter)x 15.7"(High) giving you the machining area needed to slash cycle times, lower costs and improve profitability when machining medium and large batches of smaller precision parts.
Kitamura specializes in Horizontal Machining offering a variety of machine sizes up to our largest Mycenter-HX1000i Horizontal Machining center manufacturer capable of handling a maximum work piece sizie of 80.71" (Diameter) x 61.02" (High). |
|
Kitamura’s Mycenter-HX630i Horizontal machining center is designed for the precision, accuracy and repeatability necessary to produce close tolerance parts from the toughest of materials. Guideways are equipped with ultra high precision twin ball screws and twin servo motors that provide the capability of running speeds of 1969inch/min with accuracies of -0.00008” Full Stroke and repeatability of -0.00004”. Total weight on the Mycenter-HX630i is a sturdy 45,100Lbs.
The HX630iF comes standard with a 40HP, 12,000rpm 2-step geared professional spindle that delivers 323.8ft/lbs of max. Torque with high end power - The only 50 taper machine in its class that offers the versatility for roughing with fine finish capabilities in a single set-up.
Standard is full 360° 4th axis simultaneous machining capabilities needed to machine complex, multi-sided parts, greatly reducing set-up time. In addition, Kitamura’s 2-station automatic pallet changer allows for the loading of parts while machining.
The HX630i comes standard with a 50-tool fixed pot ATC with an amazing tool-to-tool change time of 1.5 seconds. Up to 200 tools can be added in the field for added flexibility in changing from one job to the next.
|
|
The UNION PR 150 RAM-type machine in traveling-column design features a horizontal boring, drilling and milling device for heavy-duty machining of large-size parts with a working envelope of 5 x 25 m.
The RAM ensures plunging into large housing parts of up to 1600 mm in depth and is equipped with a multifunctional sag compensation. It is ideal for the reception of vertically and universally pivoting milling heads, 2 NC-axes milling attachments, NC facing heads and special tools to be docked manually or automatically or deposited in a pick-up station.
So, multi-sided and contour machining is ensured and, in association with rotary, positioning, and tilting tables of various sizes and loads permitting floating cycles between parts of various sized, this machine is one of the latest and most universal production means in a mechanical production system. |
|
Fastest for a macihne of solid box way construction, the Mycenter-HX300iF is equipped standard with high speed rapids of 1,969ipm on the X, Y and Z axes. The Mycenter-HX300iF is also capable of high-speed cutting feed rates of 1,969ipm on the X and Y axes, the perfect combination for high-speed machining applications. High Precision Machining is ensured with +-0.000078" positioning accuracy and +-0.000039" repeatability.
The Mycenter-HX300iF comes standard with a 2-station 180 degree rotating pallet changer system that provides optimum operator convenience and can b upgraded to a total of 8 pallets in the field. Optional FMS systems are also available depending on the customers' requirements. A 40 tool upgradable ATC is standard with a 1.7 second tool-tool change time. Up to 190 tools can be added in field for added flexibility.
A full 4th axis manufacturer of rotary table is a standard feature on all Kitamura Horizontal machining equipment, allowing the customer to machine complex, multi-sided parts without separate operations or special equipment. The table is capable of indexing at 0.6seconds for 90 degrees (9000deg/min) rapid feed, enabling positioning at any angle very quickly. |
|
- Horizontal machine 4 axis, 12 to 218 tools
- Strokes X - Y - Z: 700 x 700 x 700 mm
- Maxi dimension of pallets: 500 x 500 mm or 500 x 630 mm
- Maxi work pièce: 700 x 800 mm
- Manufacturers of spindle 24 kW, SK 40 or HSK A63 12'000 or 24'000 RPM
- Positioning accuracy bidirectional A (ISO 230-2): 4 um
- Repeatability of positioning R (ISO 230-2): 2 um |
|
- Horizontal machine 4 axis, 30 to 250 tools
- Strokes X - Y - Z: 1200 x 1100 x 1100 mm
- Maxi dimension of pallets: 800 x 800 mm or 800 x 1000
- Maxi work pièce: l'200 x l'200 mm
- Professional spindle 34 kW, SK 50 or HSK A100, 12'000 RPM
- Positioning accuracy bidirectional A (ISO 230-2): 5 um
- Repeatability of positioning R (ISO 230-2): 2 um |
|
| ... products without technical information |
| |
|
|
see the results for the following category
