- Production Machines >
- Forming Machine >
- Horizontal press
Horizontal presses
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm
Stroke: 80 mm - 400 mm
... our Catalog and Diagram Download or contact us directly. Touch Panel Interface For Servo Press View and analyze process parameters and graphs; comprehensive press control at your fingertips. Compatible ...
Force: 2.5 kN
Opening: 40 mm - 180 mm
Stroke: 28 mm
... and repeatable set ups which reduces set-up times * The original position of the hand lever can be varied by 360° * Horizontal pull (111 / 113) * Available for left-handed and right-handed use * The return ...
Force: 12 kN
Opening: 105 mm - 205 mm
Stroke: 45, 50 mm
... and repeatable set ups which reduces set-up times * The original position of the hand lever can be varied by 360° * Horizontal pull (111 / 113) * Available for left-handed and right-handed use * The return ...
Force: 60 kN
Max. pressure: 165 bar
the strongest among our stationary punches is used when size matters. The numbers speak a clear language. 600 mm ovrehang, 60 kN punching force at 165 bar, 66 mm punching stroke and 360 kg dead weight. This high-performance device was ...
Force: 46 kN
Max. pressure: 600 bar
400 mm overhang, 220 kg deadweight and 46 kN punching force. When it comes to punching without pre-drilling, no other device can hold a candle to our AP 400 – no matter if you need to work on control cabinet housings, switch cabinet doors ...
Force: 2,451.7 kN
Opening: 1,000 mm
Power (tons).250 Stroke (mm)500 Lower plate (mm)1800x500 Upper plate (mm)400x400 Maximum oppening (mm)1000 Engine power (HP)7,5 Approximation speed (mm/sec)10 Work speed (mm/sec)2,3 Max. pressure (bars)315 Machine dimensions ...
Mécamaq
Force: 2,451.7 kN
Opening: 900 mm
Power (tons).250 Stroke (mm)500 Lower plate (mm)2500x500 Upper plate (mm)400x300 Maximum oppening (mm)900 Engine power (HP)7,5 Speed mm/min.600 / 140 Machine dimensions (m)2,94x2,50 Weight (Kg.)8500
Mécamaq
Force: 1,765.2 kN
Opening: 850 mm
The machine has 180 Tons of power, with 400 mm stroke of the cylinder. Its lower (3000 x 600 mm) and upper plate (600 x 300 mm) have T grooves M16, with upper plate guided by two cylindrical columns of 40 m diameter with bronze sleeves. ...
Mécamaq
Force: 10 tf
Hydraulic pump power: 1.5 kW
Weight: 170 kg
Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and ...
Force: 20 tf
Stroke: 100 mm
Hydraulic pump power: 2.5 kW
Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and ...
Force: 30 tf
Stroke: 180 mm
Weight: 400 kg
Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and ...
Force: 220 kN - 2,200 kN
Hydraulic pump power: 18.5 kW
Overall height: 600 mm
The “2200 RP” hydraulic horizontal press can be relied upon to carry out all bending and straightening tasks in heavy steel construction, vehicle construction and steel service centres. The straightening ...
Stierli-Bieger AG
Force: 220 kN - 2,200 kN
Hydraulic pump power: 18.5 kW
Overall height: 600 mm
The “2200 NC+ hydraulic horizontal press can be relied upon to carry out all bending and straightening tasks in heavy steel construction, vehicle construction and steel service centres. The straightening ...
Stierli-Bieger AG
Force: 220 kN - 2,200 kN
Hydraulic pump power: 18.5 kW
Overall height: 600 mm
The “2200 CNC” hydraulic horizontal press ticks every box as far as flexibility and the range of performance of the control system are concerned. The CNC control is used primarily ...
Stierli-Bieger AG
Force: 5 kN
Stroke: 40 mm
Table width: 60 mm
Throat [mm] A1: - 63 Daylight (min.) [mm]: - 45 Daylight (max.) [mm]: - 220 Fixing holes: - 2 x M8 Ram bore Ø x Depth [mm]: - 10H7x25 Ram Ø [mm]: - 20
Force: 28 tf
Stroke: 192 mm
Table width: 550 mm
... hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes. Our PPHB-28NC is made in Europe. We always ...
RHTC BV
Force: 150 tf
Opening: 700 mm
Stroke: 450 mm
Our 150 ton cambering press is a robust and durable hydraulic straightening press. This press has a piston stroke of 450 mm (which can be regulated by means of the end-stroke switches) ...
RHTC BV
Force: 220 kN
Opening: 800 mm
Stroke: 450 mm
Our 220 ton straightening press is a robust and durable cambering press. This hydraulic press has a piston stroke of 450 mm (which can be regulated by means of the end-stroke switches) ...
RHTC BV
Force: 800 kN
Opening: 1,200 mm
Rate (strokes/min): 150 p/min
... preconditions for tooling technologies in parallel operations in the fields of blanking, drawing or trimming. The modular press design makes it possible to easily implement the technical parameters as required in the ...
Force: 0 kN - 700 kN
Opening: 150 mm - 1,200 mm
Table width: 800 mm
... Considerable Clamping Force • - Outstanding Precision • - Good Ergonomics • - Parallelism Measuring Function Why Die Spotting Press • - It allows you to conveniently match all the parts of the mould in more comfortable ...
Force: 150 tf - 400 tf
Working speed: 3, 2 mm/s
Approaching speed: 20 mm/s
Electric and hydraulic hybrid press specifically designed for high precision sheet metal straightening and deformation operations with significant energy savings. – Electrical movements to reach the sheet metal with ...
Force: 400, 300, 200 tf
Stroke: 500 mm
Working speed: 7, 5, 8 mm/s
Hydraulic press with mobile upright designed for straightening tubes and round metal profiles. The PRT electro-hydraulic press consists of an upper frame which slides along the main base of the press ...
Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal ...
Cold isostatic pressing applies pressure in a liquid from every direction to achieve greater uniformity of compaction (high-quality parts) for intricate shapes as compared to uniaxial pressing. MSE Technology’s Cold Isostatic Presses ...
Force: 49, 98.1, 196.1, 294.2, 490.3 kN
Opening: 100 mm - 150 mm
Manual hot press is the most effective solution at small production runs. Our standard MSE_LP_M_ series manual presses are available at 5 to 50 tons capacities. The manually operated oil-hydraulic laboratory press ...
Force: 10 kN - 2,941.8 kN
Opening: 0 mm - 1,000 mm
Our polymer hot press consists of a hydraulic press with automatically operated and two heated platens. The temperatures of heated platens are controlled by PLC. Water cooling jackets are installed at ...
Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar
PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 ...
Neotecman
Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar
... double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, diferent orientations or multiple billets at the same ...
Neotecman
Force: 996 kN
Opening: 500 mm
Rate (strokes/min): 4,000 p/h
... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, symmetric billets, ...
Neotecman
Force: 250 tf
Opening: 0 mm - 1,000 mm
Stroke: 500 mm
Power (tons) - 250 Stroke (mm) - 500 Lower plate (mm) - 1800x500 Upper plate (mm) - 400x400 Maximum oppening (mm) - 1000 Engine power (HP) - 7,5 Approximation speed (mm/s) - 10 Working speed (mm/s) - 2,3 Max. pressure (Bar) - ...
MECAMAQ, SL
Force: 150 tf
Opening: 0 mm - 700 mm
Stroke: 400 mm
Power (tons) - 150 Stroke (mm) - 400 Lower plate (mm) - 1500x500 Upper plate (mm) - 450x400 Throat depth (mm) - 265 Maximum oppening (mm) - 700 Engine power (HP) - 5,5 Approximation speed (mm/s) - 10 Working speed (mm/s) - 2,4 Max. ...
MECAMAQ, SL
Force: 300 tf
Stroke: 300 mm
Table width: 700 mm
The press MECAMAQ type PHH-300, It has been designed specially for the suitable one or shaped of profiles for companies of structures. Operation in manual and automatic.
MECAMAQ, SL
... tackle stubborn wrinkles while reducing ironing time by up to 50 percent. With its advanced design and build, a PSP steam press will leave a professional dry-clean finish on all types of garments.
... for easy and comfortable retouch of the dies. The top die may be presented vertical (rambolster is tiltable to 110°) or horizontal (rambolster is tiltable to 180°). A PLC with simple HMI facilitates the tool tests.
Force: 0 kN - 5,000 kN
Frame: Horizontal C-frame with extreme throat depth Pressdrive: Hydraulic servo-drive Applications: Straightening of aluminium airplane structures
Force: 16,000 kN
... forging procedure no limits on part length due to unlimited working strokes of hydraulic press systems high output performance, particularly with horizontal press systems using two die chambers
Force: 400 kN
Max. pressure: 30 MPa
Weight: 17,000 kg
Automatic Isostatic Press KDR400 is used for ceramic tray pressing; it is a KEDA self-dependent invention with internationally advanced technology based on experience of ceramics press manufacturing, ...
LPBE-1100 LPBE-1100 Conveyor belt press Designed for the vulcanisation of thermoplastic belts. Max. belt width: 1,100 mm
Force: 30 tf
Weight: 1,350 kg
Overall length: 1,200 mm
THE UNIVERSAL PROFESSIONAL-HORIZONTAL PRESS... The current version of the Horizontal Press, GELBER-BIEGER XL Plus, is a so called „Face-Lift“-Modell from the original ...
Gelber-Bieger GmbH
Force: 40 tf
Working speed: 5 mm/s
... Operator side horizontal light 1340 mm Vertical light 800 mm Main cylinder stroke 700 mm Height of the worktop from the ground 1200 mm Lower worktop size 1200x800 mm Mobile worktop size 1200x800 mm Dimension of ...
AEM3 S.r.l.
... setting of the press parameters high and constant quality of the green compacts thanks to two precise weighing systems flexibility production of all standard segments possible die-clamping system for the use of ...
Dr. Fritch
Force: 3 tf
Weight: 170 lb
Our AP-3R arbor press harnesses a whopping 3 tons of force. A great value, this sheet metal-forming arbor press will offer decades of profitable duty at full capacity. Features Solid, case-hardened ...
... that with two trays working in pendulum, to that with multiple trays vertically recirculating above or under the press or on a horizontal carousel. The presses for this type of use are usually hot ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining