|
|
Heavy Duty Suction Hose
* Constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 1” to 6” ID
* Bottle green and/or grey
* Weather resistant and durable
* Constructed from 100% PVC
* Excellent pressure and vacuum ratings
|
|
BELL suggests and supplies the EUROPOWER hose 352 type for the whole range of pumps.
It is a flexible hose for great perfomances, created for higher mecanichal and dynamic standards, with a more longevity and excellent flexibility.
Particularly useful for hydraulic systems with very high pressure and it is compatible with hydraulic oils, lubricants, minerals and phosphats.
|
|
Programme
• Smooth 1/8" to 4" (DN3 to DN100)
• Convoluted ¼" to 4"
• Virgin and anti-static PTFE
• Stainless steel (gas) high pressure hoses
• Nylaflow hoses with SAE approval
• Double/single braid
• Assembled or bulk hoses
Options
• Anti-static
• Ultra high pressure (KEVLAR®)
• Sanitary
• Silicone/Polyolefin/PP/PVC/Hytrel cover
• Anti-kink spirals
• Stainless steel wire (vaccuum convoluted)
• Fittings according NEN 3268, DIN 477 and
EN 13221
• Degreased, suitable for oxygen applications
|
|
|
|
|
|
Hoses made of HT-PUR are much more resistance to heat- up to a constant temperature of 125 °C, even short-term to 150 °C.
Applications
Universal and abrasion-proof suction and transport hose, especially suitable (light to heavy hoses):
- for abrasive solids solids such as dust, powder, chips, granulates and for high flow-rates extremely abrasive solids such as sand, gravel, refuse glass
- for gaseous and liquid media
for printing machines, blowers and compressors, for industrial vacuum cleaners, granulate conveying systems, for silo vehicles as conveying hose in glassworks, docks, steel works, stone pits, shipyards, cement works etc.
Properties
-very good heat resistance (better than comparable TPE and neoprene)
-highly abrasion-proof
- smooth interior
- optimized flow properties
- high tensile strength and tear resistance
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
-softener and halogen free
- gas and liquid tight
- capable of electro-static discharge by grounding the spiral
Material
- wall: special premium high-temperature-polyurethane (HT-PUR and Pre-PUR)
- spiral: spring steel wire
Temperature Range
-40 °C up to 125 °C (short time to +150 °C approx.)
|
|
|
|
|
|
AIRDUC® PUR 350 MHF
Applications:
Universal and abrasion-proof suction and transport hose, especially suitable:
- for abrasive solids such as dust, powder, fibres and chips
- for gaseous media such as oil vapors and welding smoke
- for de-dusting and suction plants
Properties:
- super-light model
- highly abrasion-proof
- smooth interior
- flexible
- optimized flow properties
- high tensile strength and tear resistant
- food quality wall complies with: FDA 21 CFR 177.2600 + 178.2010, EC guideline 2002/72/EC
- approval according to EC guideline 2002/72/EC for the complete hose by independent institute
- microbe and hydrolysis resistant
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
- very good low temperature flexibility
- small bending radius
- softener and halogen free
- gas and liquid tight
- capable of electro-static discharge according to BGR 132
Material:
- wall: special premium ether-polyurethane
- spiral: spring steel wire
Wall Thickness: 0.7 mm approx.
Temperature Range:
- –40 °C approx. To + 90 °C (short time to 125 °C approx.)
|
|
We offer high temperature hoses that can be used up to about 1100 °C, which, depending on the type vary in weight, flexibility, compressibility and suitability for positive pressure applications.
Applications
Suction and blast hose, especially suitable:
- as conductor of hot and cold air
- for printing machines, blowers and compressors
Some properties of the medium and high temperature hoses
- very good heat resistance
- highly flexible
- kink-proof
Temperature Range
-40 °C to 900 °C (short time to +1100 °C approx.)
Wall thickness
0.4 – 0.8 mm
|
|
NORRES-Metal hoses have the following characteristics:
- especially sturdy
- can be used in many applications
- high temperature resistance in many cases
- electrically conductive metal wall
Applications
Suction hoses, transport hoses especially suitable:
- for solids such as powder, chips, granulates, sand gravel, grain
- for gaseous media
- for silo vehicles
- for de-dusting and suction plants, air conditioning and ventilation technique
- as robust protection hose
- as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc.
Some properties of NORRES Metal hoses
- abrasion-proof
- flexible
- very robust
- capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding.
Temperature Range
up to +600 °C approx.
|
|
|
|
|
|
Microbe and hydrolysis resistant of NORRES (AIRDUC, CP, NORFLEX and PROTAPE) consist in high quality ether-polyurethane and have the following characteristics:
- resistant to microbes (the chemical structure of ether-polyurethanes gives the materials permanent resistance to microbial attack)
- resistant to hydrolysis (this is critical for wet applications, at higher temperatures and for use in tropical climates)
- better chemical stability than comparable ester-polyurethanes
- better flexibility at low temperatures than comparable ester-polyurethanes
Applications
Abrasion-proof suction, transport and blast hoses, especially suitable (super light to super heavy hoses):
- for abrasive solids such as dust, powder, fibres, chips, granulates, sand, gravel, grain, refuse glass
- for gaseous and liquid media
- for public utility street cleaning vehicles
- for lawnmowers, grass sweeping machines and leaves exhaust
- for feed transport
Some properties of the Microbe and Hydrolysis resistant polyurethane hoses
- microbe and hydrolysis resistant
- highly abrasion-proof
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
- softener and halogen free
- capable of electro-static discharge (according to BGR 132) grounding the spiral
Temperature Range
-40 °C approx. up to +90 °C (short time to +125 °C approx.)
Connecting parts:
Microbe and hydrolysis resistant connecting parts
|
|
Oil Resistant Suction & Discharge Hose
* Constructed from a rigid PVC spiral encased in flexible PVC nitrile blend
* Stock sizes from 3/4” to 4” ID
* Blue
* Weather resistant and durable
* Lightweight
* Flexible
|
|
|
Polyether-based polyurethane tubing offers excellant resistance to chemicals,kinking,abrasion hydrolysis,oxidation and ozone.It is excellant in applications requiring superior toughness and resistance to tear,abrasion,oxidation,fungus and humidity.
|
|
NORRES PVC hoses – Made in Germany- are useful for many applications.
Applications
NORRES PVC hoses as PROTAPE® PVC, AIRDUC® PVC, BARDUC® PVC, NORPLAST® PVC, NORFLEX® PVC are universal suction, blast and/ or transport hoses especially suitable:
- for solids such as dust, powder and fibres
- for gaseous and liquid media
- for de-dusting and suction plants, air conditioning and ventilation technique
- as protection hose
- for reducing the ground water level
- for industry, agriculture and construction engineering
- for irrigation, fertilizers, insecticides, purifying agents
Some properties of our PVC hoses from super light to super heavy hoses
- flexible
- optimized flow properties
- good resistance to chemicals
- good resistance to alkalis and acids
- good resistance to UV and ozone
Temperature Range
-20 °C approx. up to +85 °C approx.
Wall thickness
0.25 - 8.0 mm
|
|
Flexible Nylon Tube Metric
* Nylon 12
* Stock sizes from 4mm to 28mm OD
* Choice of Colours
* Flexible
* Lightweight
* Good Chemical Resistance
Flexible Nylon Tube Imperial
* Nylon 12
* Stock sizes from 1/8” to 1” OD (Available in medium or light wall)
* Choice of Colours
* Flexible
* Lightweight
* Good Chemical Resistance
|
|
Fluoropolymer tubing
Programme
- Smooth and corrugated/convoluted
- Imperial, metric, AWG
- Filled/Pigmented
- Cleanroom production
- Straight lengths, coils, reels/spools
- Spirals
- Monofilament/rod
Options
- Multi-core
- Medical grade
- Printing/Marking
- Etching
- Cover/jacket
- Forming
- Co-extrusion
- Assemblies
- Tips, plugged or welded
|
|
PTFE-tubes are preferably used by the chemical, electrical and mechanical industries with a continually rising trend in medical technology applications as well.
Highlights
outstanding chemical resistance against aggressive media and hot vapors
suitable for use at minus 200°C (with moderate mechanical stress)
unfilled PTFE is physiologically neutral (FDA-approved)
Typical Applications
syringes, catheters, vials and endoscopic devices for medical applications (single- or multi-lumen)
degasification stations for liquid chromatography
lining for sensors and fill level measuring devices
linings for Bowden cables
linings for electric heating elements in electro-plating and micro-electronics technologies
insulations for high-voltage cables
feeder hoses for spray-painting lines
feeder hoses for foodstuffs, oils, resins, acids, alcalis, gases and solvents
covers for fuser and feeder rollers
|
|
Reinforced flexible PVC Hose
* Two layers of PVC reinforced with a 1000 Denier high tenacity polyester yarn
* Stock sizes from 8mm to 62mm OD
* Wide range of colours
* Silicone and cadmium free
* Lightweight and flexible
* Suitable for food use
Reinforced flexible PVC Hose (European standard)
* Two layers of PVC reinforced with a 1000 Denier high tenacity polyester yarn
* Slightly thinner wall compared with our standard reinforced PVC
* Stock sizes from 11mm to 32mm OD
* Silicone and cadmium free
* Lightweight and flexible
* Suitable for food use
Unreinforced PVC Tubing
* 100% flexible PVC
* Stock sizes from 6mm to 88mm OD
* Silicone and cadmium free
* Good UV resistance
* Lightweight and flexible
* Suitable for food use
|
|
Reinforced flexible PVC Hose
* Two layers of PVC reinforced with a 1000 Denier high tenacity polyester yarn
* Stock sizes from 8mm to 62mm OD
* Wide range of colours
* Silicone and cadmium free
* Lightweight and flexible
* Suitable for food use
Reinforced flexible PVC Hose (European standard)
* Two layers of PVC reinforced with a 1000 Denier high tenacity polyester yarn
* Slightly thinner wall compared with our standard reinforced PVC
* Stock sizes from 11mm to 32mm OD
* Silicone and cadmium free
* Lightweight and flexible
* Suitable for food use
|
|
Layflat Delivery Hose
* Flexible PVC with closely woven yarn reinforcement
* Inner and outer walls are inseparably fused
* Stock sizes from 1 1/2” to 6” ID
* Blue
* Weather resistant and durable
* Completely collapsible
* Smooth bore
Technical Information
* Temperatures: -15°C to +55°C *
* Lightweight
* Flexible
* Very strong
* Completely collapsible when not in use
* Minimum friction and maximum flow is maintained by the smooth bore
* Good abrasion, rot and chemical resistance
* Excellent pressure and vacuum ratings
* Wide operating temperature range
|
|
Medium Duty Suction Hose
* Constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 1” to 6” ID
* Olive green
* Weather resistant
* Durable
* Lightweight
* Flexible
* 15% lighter than HDS
|
|
Specially designed for vacuum applications
High flexibility and minimum curvature radiuses make it ideal for cable chains.
|
|
General Purpose Vacuum Hose
* Constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 1” to 4” ID
* Weather resistant
* Durable
* Lightweight
* Flexible
* Good crush and kink resistance
Technical Information
* Vacuum: 600mm Hg = 80% at 20°C *
* Temperatures: -15°C to +65°C. Cold bend - 45°C *
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Minimum friction and maximum flow is maintained by the smooth bore
* Good abrasion, rot and chemical resistance
* Excellent pressure and vacuum ratings
* Wide operating temperature range
* Good crush and kink resistance
* Subject to minimum order quantities GVH is also available in yellow or black Flame Retardant grade
|
|
|
|
|
|
Colex Vendhose is a multi-layer food quality flexible Hose manufactured from EVA material, lined with Low Density Polyethylene and reinforced with a 1000 Denier high tenacity polyester yarn.
Both the EVA and the Polyethylene are approved for food contact applications in Europe and USA.
It has been tested in accordance with BS6920 and has achieved WRAS approval for the conveyance of hot and cold potable water (WRC approval No. 0808528)
* PVC free
* Excellent chemical resistance
* Flexible
Applications
Cold water connections to vending machines, Conveyance of soft drinks in cellar to bar installations, Chemical lines and some liquid foodstuffs.
This Hose is PVC free making it suitable for a range of applications where end users are concerned about the possibility of Phthalate (Plasticizer) migration.
Chemical Resistance
Vendhose has the same excellent chemical resistance as Low-Density Polyethylene. The flexibility of these hoses is not dependent on the use of plasticizers therefore the problems resulting from plasticizer extraction or migration do not occur.
|
|
Water Delivery Hose
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 3/4” to 4”
* Black or translucent green
* Lightweight
* Flexible
* Weather resistant
* Durable
|
|
Water Delivery Hose
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Stock sizes from 3/4” to 4”
* Black or translucent green
* Lightweight
* Flexible
* Weather resistant
* Durable
Technical Information
* Vacuum: 570mm Hg = 75% at 20°C *
* Temperatures: -15°C to +65°C. Cold bend - 45°C *
* The wall is constructed from a rigid PVC spiral encased in flexible PVC
* Minimum friction and maximum flow is maintained by the smooth bore
* Good abrasion, rot and chemical resistance
* Excellent pressure and vacuum ratings
* Wide operating temperature range
* Good crush and kink resistance
* Subject to minimum order quantities Colex can also supply non standard colours where required
|
|
Provides lower emissions for a cleaner environment- excellent resistance to gasoline, oils greases and petroleum based fuels. Highly flexible and kink resistant. tight tolerances and consistant fitting retention. Resistant to heat preventing premature aging. Flammability rating: UL 94HB (liner and cover). High abrasion and tear resistance. Meets the stringent permeation requirements proposed by Californian Air Ressource Board (CARB) and the US Environmental Protection Agency (EPA). Translucent -Hardness SHORE A: 85- Specific Gravity : 1.18
Maximum recommended operating temperature : 85 C
|
|
Provides lower emissions for cleaner environment. Resistant to fuels and industrial lubricants - Excellent bend radius resulting in kink resistance . Thermoplastic liner offers good fitting retention and fast assembly. Ozone and UV light resistant. Flammability rating : UL 94 HB (liner and cover). Good premature aging performance. Meets the stringent permeation requirements proposed by both California Air Ressource Board (CARB) and the US Environmental Protection Agency (EPA).
Opaque gray Cover- Hardness Shore A 74- Specific Gravity : 1.13
Maximum recommended temperature : 82°C
|
|
Reinforced Polyurethane Hose
* Two layers of 100% ether polyurethane reinforced with a 1000 Denier high tenacity polyester yarn
* Stock sizes from 6.3mm to 25mm ID
* Suitable for Food Use
* Shore A 90
* Silicone & Cadmium Free
* Hydrolysis Resistant
* Plasticiser Free
Unreinforced Polyurethane Tube
* 100% ether polyurethane
* Stock sizes from 3mm to 13mm ID
* Suitable for Food Use
* Shore A 90
* Silicone & Cadmium Free
* Hydrolysis Resistant
* Plasticiser Free
|
|
Tygon® B-44-EU was formulated, notably, to meet the new European Directive 2002/72/EEC limiting the use of phtalate in plastic for food contact.
This new formulation is compatible with : dry, moist forms and aqueous products, acid or alcoholic substances up to 50°C as well as for milk.
Tygon® B-44-EU is recommended for its reliability for a wide range of applications : filling, drainage and transfer.
It has an outstanding resistance to both alkalin detergents and sterilization substances commonly used.
It is not suitable for fatty products.
|
|
EPDM Chemical Suction Hose - Novaflex 4200
EPDM Chemical Suction Hose
EPDM Chemical Discharge Hose - Novaflex 4201
FEP Chemical Transfer Hose - Novaflex 4600
FEP Chemical Transfer Hose
UHMWP Chemical Suction & Discharge Hose - Novaflex 4700
UHMWP chemical suction & discharge hose
UHMWP Chemical Suction & Discharge Hose - Novaflex 4705
UHMWP Chemical Suction & Discharge Hose
|
|
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
|
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
Visit our website below for a complete list of the hoses available
|
|
... see all the products in the category
Hoses
|
|
|
