|
|
|
Clippard offers a variety of miniature hose and tubing from copper, nylon and polyethylene tubing to flexible urethane and vinyl hose.
|
|
Metal Flexible Hose
Multi-Purpose Push-On Hose
PTFE-Lined, Stainless Steel Braided Hose
Thermoplastic Hose
|
|
|
Goodyear can offer a selection of hoses suitable for underground applications. Visit our website below for a complete list of the hoses available
|
|
|
Goodyear can offer a selection of hoses suitable for underground applications. Visit our website below for a complete list of the hoses available
|
|
Properties:
LUNARFLEX® is designed as a double pipe. In small dimensions, the medium pipes are made of soft copper but helically corrugated special steel is used for the larger dimensions.
The heat insulation consists of a flexible, UV-resistant, CFC-free EPDM foam with excellent thermal insulation properties. The outer casing consists of a UV-resistant filament reinforced with special steel wire (to protect against pecking by birds).
Guaranteed time savings
Thanks to their narrow bending radii, LUNARFLEX® pipes can be positioned in existing shafts or profiles in the building and on the facade.
Very short installation times and processing without special tools - two more attributes that make LUNARFLEX® the technically perfect solution for connections between solar collectors and heat accumulators.
Areas of application
LUNARFLEX® is used as a transport pipe for heat transfer fluid between solar collectors and hot water storage tanks.
|
|
|
|
|
|
Beat the heat and the cold
Gates' special high/low temperature hoses recommended for high-pressure hydraulic lines and developed for use on many types of machinery and other applications where heat or cold threatens your hose's life.
Key benefits:
- Easy to route and to install in tight areas
- Lightweight
- Alternative to spiral hoses in high pressure lines where flexibility is required
- Superior impulse performance: tested up to 600,000 impulse cycles
- Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
Our ranges:
- G2H: a range of two wire braid hoses for oil temperatures up to 135°C
- G2XH: a range of two wire braid hoses for oil temperatures up to 150°C
- M3KH: the constant pressure hose range for applications up to 21.0 MPa (3,000 psi) and oil temperatures up to 121°C
- M4KH: the constant pressure hose range for applications up to 28.0 MPa (4,000 psi) and oil temperatures up to 121°C
- G2L: a range of two wire braid hoses for oil temperatures from -57°C up to 100°C
- C1TH: a range of one wire braid hoses for oil temperatures up to 135°C
- G1H: a range of one wire braid hoses for oil temperatures up to 135°C
- ACR: a range of one wire braid hoses for oil temperatures up to 150°C
|
|
Properties:
Application ==> Low pressure hose for general applications
Standard ==> EN 854 1 TE
Inner layer ==> oil resistant synthetic rubber
Insert ==> one textile braided insert
Outer layer ==> oil resistant and weatherproof synthetic rubber
Colour ==> black
Min. temperature - 40 °C Max. temperature + 100 °C
Elongation + 2 % to - 4 %
Media : *Mineral oil
*Glycol
*Water oil emulsions
*Water (0°C to + 70°C)
|
|
The starting materials for HYDRA® corrugated hoses are either seamless or longitudinally welded, thin-walled tubes in which corrugations are formed mechanically or hydraulically using special tools.
Corrugated hoses are absolutely leak-tight and are employed to convey pressurised liquids and gases or as vacuum lines. Corrugated hoses are also employed as inexpensive, flexible connecting elements, as filling hoses, to absorb movements, thermal expansions or vibrations.
Corrugated hoses lined with PTFE are used especially with particularly aggressive media.
|
|
|
Hose assemblies are custom made for each application according to size, pressure rating, temperature, configuration, and length. Hose fittings are available in stainless steel, aluminum, titanium, and nickel-based alloy materials.
|
|
We have a large selection of hose covering this range, including:
Dispensing hose - for all type of gasoline dispensing applications
Aircraft Refueling - for the aviation industry
Dock hose - hoses suitable for loading and unloading of vessal, between docks and ships. Including hoses complying to EN 1765 and OCIMF standards
Visit our website below for a list of the hoses available
|
|
We have a large selection of hose covering this range, including:
Dispensing hose - for all type of gasoline dispensing applications
Aircraft Refueling - for the aviation industry
Dock hose - hoses suitable for loading and unloading of vessal, between docks and ships. Including hoses complying to EN 1765 and OCIMF standards
Visit our website below for a list of the hoses available
|
|
|
Theses hoses are designed mostly to transport crude oil or refined petroleum products with some handling extreme cold weather flexibility. Others are used for despensing from drums or storage tanks and can be used with bio-diesel fuels.
|
|
TRELLOIL D
Multipurpose hose especially designed for petrol, oil and other petrochemical products (with aromatic content up to 50 %).
From 30 to 100 mm.
|
|
Under Floor Central Heating Systems
Polyplumb offers three configurations of under floor central heating suitable for new build, retrofit, or any type of construction. All are compatible with standard central heating boilers and are especially suitable for use with condensing boilers which give maximum efficiency at low output levels.
|
|
|
Polyethylene is the most commonly used tubing due to its flexibility, wide range of chemical resistance and lower cost. Nycoil uses high quality Linear Low Density Polyethylene material (LLDPE) that conforms to Food and Drug Administration 21 CFR 177.1520 C where contact with food is an issue (applies to all colors). LLDPE has a much higher resistance to stress cracking as compared to other Polyethylene compounds. It is also chemically inert, meaning it forms a good barrier against moisture, vapors and gases - minimizing the possibility of leaks or contamination. Where prolonged exposure to sunlight or ultraviolet (UV) light is a concern, black tubing is recommended for extended life.
|
|
Especially designed for PU application (Polyurethan-glue). The changeable glue core enables a fast and inexpensive reconnection.
The hoses are very flexible and have an external diameter of 50mm and inner diameter of 7-13mm. They are constructed to work at temperatures up to 200°C and are pressure resistant up to 200bar.
|
|
Developed for the low-temperature range
CALPEX® is a flexible, self-compensating, continuous and heat-insulated pipe system with a medium pipe made of cross-linked polyethylene.
No underground connections
CALPEX® district heating pipes can be supplied in rings of up to 807 m in one piece, depending on the dimensions. This largely eliminates underground connection points.
Area of application:
Heat supply pipes, drinking water transportation, drainage/waste water systems, cooling plants, swimming bath technology and agricultural applications are just a few examples from our extensive list of references.
|
|
Goodyear has a wide range of Pressure wash / Cleaning hoses available. Hoses for high pressure washer equipment and well as our special 'Fortress' range of hoses with Microban cover protection for use in food processing plants, diaries, breweries etc.
Visit our website below for a complete list of the hoses available.
Food Washdown hoses can be found on :
http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=20&search_app_ID=Go%21
|
|
Goodyear has a wide range of Pressure wash / Cleaning hoses available. Hoses for high pressure washer equipment and well as our special 'Fortress' range of hoses with Microban cover protection for use in food processing plants, diaries, breweries etc.
Visit our website below for a complete list of the hoses available.
|
|
High pressure jetting
TRELLJET 561
For professional and industrial high pressure cleaning.
Suitable for mobile pressure washers and fixed installations.
Also suits reel mounted applications.
From 6 to 13 mm.
|
|
Flexiline
Ptfe lined metalic flexible houses with
or without braid: smooth, convoluted,
corrugated and antistatic.
|
|
Features :
Application ==> Medium pressure applications with hydraulic fluids at high temperatures and with aggressive media for the chemical industry, surface technology, 2 component systems
Inner layer ==> PTFE
Insert ==> one stainless steel braided insert
Outer layer ==> none
Colour ==> metallic
Min. temperature - 70 °C Max. temperature + 260 °C
|
|
Properties:
Application ==> general application for air, water etc.
Inner layer ==> Soft PVC
Insert ==> none
Outer layer ==> Soft PVC
Colour ==> clear
Min. temperature - 20 °C Max. temperature + 60 °C
Special features without textile insert and Hardness: approx. 77° Shore A Media : *Air
*Water
|
|
Technical Description
The new generation of highly flexible RECTUS hoses consists of a textile-reinforced, 3-ply PVC hose with a smooth inner tube, polyester thread insert and abrasion-proof outer covering.
Advantages
Low weight, very high flexibility, highly resistant, high resistance to pressure, UV-resistant, long service life, shock and tread-resistant, non-buckling, manufacturer‘s imprint with technical specifications.
Technical Data
Working temperature:
-25°C up to +60°C
Maximum operating pressure:
at +23°C: 15 bar
Bursting pressure:at +23°C: 63 bar
Color: light blue
|
|
|
Rated for intermitent temperatures up to 450 F/ 232 C for saturated steam at 250 PSI. It is recommended that all steam hose be drained after use.
|
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available
|
|
Goodyear offers a range of premium quality spray hoses suitable for a variety of applications.
Visit our website below for a complete list of the hoses available
|
|
Niro-Flex hoses are additionally equipped with a stainless steel neeting to protect them from mechanical outside influences
The hoses are even of the stainless steel netting very flexible and have an external diameter of 50mm and inner diameter of 8mm. They are constructed to work at temperatures up to 200°C and are pressure resistant up to 200bar.
|
|
Goodyear range of steam hoses are suitable for all round steam service applications in plants, refineries and shipyards etc.
Visit our website below for a complete list of the hoses available
|
|
Goodyear range of steam hoses are suitable for all round steam service applications in plants, refineries and shipyards etc.
Visit our website below for a complete list of the hoses available
|
|
... see all the products in the category
Hoses
|
|
|