|
|
NORMAFIX® RS/RSGU
Pipe retaining clips to DIN 3016
NORMAFIX® RS/RSGU pipe retaining clips are ideal for attaching and retaining pipes, cables, cable harnesses, cable ducts, hoses and a wide variety of mains and lines.
- Reinforced band ends = preventing the clip from tearing or loosening in cases where there is a high mechanical load
- Form fitting and adjustable band = ease of assembly = sage attachment
- Optionally supplied with EPDM profile = vibration damping & protection aganist seepage water
|
|
|
|
|
|
One-piece, self locking pipe clamp for safe and efficient installation of cables and tubes
- Simple mounting without locking screws
- Fast mounting
- Listed by IAPMO R&T/UPC®
- Approved by KIWA®, UL®
- Halogen free as per IEC-Norm 754-2
- Burning behavior as per UL94 HB
- Clamping range 8 - 127 mm
- Low height
- Different plastic materials possible
Since 1975 the self-locking pipe clamp CLIC has proved itself millions of times. Cables and pipes fixed with «Swiss Quality» are fast and securely fixed throughout the world.
Today, system solutions (pipe clamps, screws, plugs and accessories) are required, for instance in telecommunications. Consulting during the phase of planning, becomes more and more important. A long experience in business and our internal development division have allowed many individual solutions in collaboration with our customers engineers. Our production is able to preassemble tailor-made CLIC systems even at short notice.
CLIC ideally covers the demands for fixing points in sensitive environments. In many tunnels coaxial cables for radio and mobile telephone systems are openly mounted. The performance may not be impaired by interference from metallic parts. The plastic pipe clamp is therefore the best solution for the installation.
|
|
Specialty - P-Clips
IDEAL® P-Clips 80002 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 15 mm band width. 6 mm hole diameter.
Specialty - P-Clips
IDEAL® P-Clips 80003 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 16 mm band width. 10 mm hole diameter.
|
|
This is the classic product group. You'll still find products here from the early years which are still very popular with the installers and are processed in large quantities to day.
The newer product series of the anchor and C-profile rails with the accompanying clips and yoke clamps have still a high significance in the everyday workflow, too.
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
PUSH LOCK CABLE CLAMPS AND SNAP LOCK CABLE CLAMPS DESIGNED TO INSTALL WITHOUT DAMAGE AND TANGLES TO SENSITIVE WIRE/CABLE/HOSE BUNDLES
Heyco Products, Inc., a leading ISO 9001:2000 US-based designer and manufacturer of wire protection products and electrical components, is now offering a new line of Push Lock Cable Clamps and Snap Lock Cable Clamps for clamping cable/wire/hose bundles securely in place.
Both clamp types resist corrosion, salt water, weak acids, grease, and common solvents (non UL certified or tested).
|
|
| ... products without technical information |
| |
BT601 is a versatile Cable scan (diagnostic) & Wire Finder (tracing) tool, designed for cable/network system installation and network technician to diagnostic network problem.
Wire finding is BT601 major unique function where other cable checkers do not have, it can locate up to 3000m long wire/cable even in a complex PC network or telephone system.
BT601 also built-in LAN cable mapping function, to quickly diagnostic LAN cable condition and identify fault point.
Bright white LED torch and External Earphone support is BT601's value added function to enable service technician to work conveniently and comfortably in dark and noisy environment.
|
|
|
|
|
|
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities.
|
|
Weigh Modules and Force Transducers
* High accuracy
* Superior installation properties
* Withstands up to 100% side load
* For hard environmental conditions (IP67)
* Covers most applications
|
|
Newly Enhanced Sensitivity
for tough to locate pipes and cables
- Single-handed operation
- 2 buttons, 2 knobs (too easy)
- Change frequencies from the receiver
|
|
|
As with our magnetic locators, Schonstedt pipe & cable locators are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions. Our “P&C” line is quickly becoming the professional's choice for locating pipe and cable, but you don't have to be a pro to use these instruments. So even if you only have an occasional need to find pipe and cable underground, keep a Schonstedt in your kit.
|
|
| ... products without technical information |
| |
Schleuniger offers several solutions for marking, printing and labeling of wires and cables. From hotstamp marking to inkjet printing and thermal transfer printing - all integrated in automatic production lines with Schleuniger's automatic wire cutting and stripping machines.
With the PC software Cayman, all printing parameters are programmed directly in the same software where the settings of your cut & strip machine are made. Schleuniger has also implemented various customized solutions with several inkjet printers in one production line or printing with different colors on both sides of the cable / wire.
|
|
MK3
- Cable, wire and component marking system X-CARD for more efficient and versatile marking on site.
- Prints various marker tags on credit card type format (Partex type PFC) accomodating also project and mounting information directly on the card.
- Project and mounting information directly on the card gives lower marking costs.
- Printing on site with PC controlled thermotransfer printer.
PFC
- Fast mounting with easy breakoff cards with precut or moulded marker tags.
- Easily detachable tags are put directly into PARTEX various tag holder systems.
- The hard tags can be rapidly mounted, before or after connecting the wires and cables.
- Easily printable in the X-Card MK3 printing machine with high production rate.
|
|
MK9 ProMark
- Compact, portable, ID printer for cable, wire and component marking on site.
- Feeds, prints and cuts bulk Partex profiles and self adhesive labels from internal cassettes.
- Stores or imports files from a compact flash memory card (option).
- ProMark is a very cost effective identification system for use in panel buildning and electrical installations.
|
|
SP2000
- Compact heavy duty machine for high demand production of wire, cable and component marking.
- PC link connection or stand alone mode with an optional standard keyboard.
- Printing of large diameter sleeves and tubes ranking up to 28 mm OD or 45 mm flattened.
- Inproved mechanism for quality printing on hardened tubes in low temperature environment.
- Sleeves can be completely or partly cut off.
|
|
ENGINE: Cummins 6BT5.9 (174HP)
POWERTRAIN:
* Transmission Franklin P4-385, 4 speed powershift
* Torque Converter 13.7 Inch
* Axles: Standard - Franklin F-240 Heavy Duty Planetary, Optional - Franklin F-257 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front and rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, Hydraulic released
|
|
ENGINE: Cummins 6BTA5.9 (185 HP) POWER TRAIN
POWER TRAIN:
* Transmission: Franklin P4-385, 4 speed powershift
* Torque Converter: Clark 13.7 Inch
* Axles: Franklin F-320 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service: Enclosed multi-disc wet brake
* Brakes, Parking: Spring applied, hydraulic released
|
|
ENGINE:
* Cummins 6BTA5.9 (200 HP)
POWER TRAIN:
* Transmission Franklin P6-410, 6 speed powershift
* Torque Converter Clark 13.7 Inch
* Axles Franklin F-345 Heavy Duty Planetary
* Differentials Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, hydraulic released
|
|
| ... products without technical information |
| |
Cable seal with progressive tighteninig
Description :
Resistance : diametre : 1,6 = 412Kgs - 2,4 = 850Kgs
Material :
Head : Zinc
Cable : Galvanized metal
Characteristics :
Consecutive numbers
Free marking from 500 pieces
Marking of 6 digits and 3 letters maximum
Cable length : 300mm
Diameter : 3.2mm, 2.4mm, 1.6mm
Options:
Colored Head
Laser marking and barecode
Cable length up to 2000mm
Delivery time:
Neutral model: available on stock
Personalized model: about 10 weeks
Customs tariff: 83 09 90 90
|
|
| ... products without technical information |
| |
For outdoor and indoor applications
Available in Diesel or LPG
Basic capacities from 12000 kg to 25000 kg
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
