|
|
NORMAFIX® RS/RSGU
Pipe retaining clips to DIN 3016
NORMAFIX® RS/RSGU pipe retaining clips are ideal for attaching and retaining pipes, cables, cable harnesses, cable ducts, hoses and a wide variety of mains and lines.
- Reinforced band ends = preventing the clip from tearing or loosening in cases where there is a high mechanical load
- Form fitting and adjustable band = ease of assembly = sage attachment
- Optionally supplied with EPDM profile = vibration damping & protection aganist seepage water
|
|
|
|
|
|
One-piece, self locking pipe clamp for safe and efficient installation of cables and tubes
- Simple mounting without locking screws
- Fast mounting
- Listed by IAPMO R&T/UPC®
- Approved by KIWA®, UL®
- Halogen free as per IEC-Norm 754-2
- Burning behavior as per UL94 HB
- Clamping range 8 - 127 mm
- Low height
- Different plastic materials possible
Since 1975 the self-locking pipe clamp CLIC has proved itself millions of times. Cables and pipes fixed with «Swiss Quality» are fast and securely fixed throughout the world.
Today, system solutions (pipe clamps, screws, plugs and accessories) are required, for instance in telecommunications. Consulting during the phase of planning, becomes more and more important. A long experience in business and our internal development division have allowed many individual solutions in collaboration with our customers engineers. Our production is able to preassemble tailor-made CLIC systems even at short notice.
CLIC ideally covers the demands for fixing points in sensitive environments. In many tunnels coaxial cables for radio and mobile telephone systems are openly mounted. The performance may not be impaired by interference from metallic parts. The plastic pipe clamp is therefore the best solution for the installation.
|
|
Specialty - P-Clips
IDEAL® P-Clips 80002 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 15 mm band width. 6 mm hole diameter.
Specialty - P-Clips
IDEAL® P-Clips 80003 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 16 mm band width. 10 mm hole diameter.
|
|
This is the classic product group. You'll still find products here from the early years which are still very popular with the installers and are processed in large quantities to day.
The newer product series of the anchor and C-profile rails with the accompanying clips and yoke clamps have still a high significance in the everyday workflow, too.
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
* Quick and easy installation.
* For clamping cable or tubing securely in place.
* Resists corrosion, salt water, weak acids, grease, and common solvents. This feature is not assessed by UL certification or testing.
* Push in arrows for easy installation with no additional hardware.
|
|
| ... products without technical information |
| |
BT601 is a versatile Cable scan (diagnostic) & Wire Finder (tracing) tool, designed for cable/network system installation and network technician to diagnostic network problem.
Wire finding is BT601 major unique function where other cable checkers do not have, it can locate up to 3000m long wire/cable even in a complex PC network or telephone system.
BT601 also built-in LAN cable mapping function, to quickly diagnostic LAN cable condition and identify fault point.
Bright white LED torch and External Earphone support is BT601's value added function to enable service technician to work conveniently and comfortably in dark and noisy environment.
|
|
|
|
|
|
DIGICAT 100 Buried Service Locator
The DIGICAT 100 can be used to find live (energised) power cables, trace buried metal services which reradiate signals. The highly visible digital LED display makes a swift service location possible.
DIGICAT 200 Buried Service Locator
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. ± 10%.
DIGICAT 200 GIS Buried Service Locator
The DIGICAT200 GIS offers all the functions of the DIGICAT 200 with additional wireless connectivity. Compatible with a wide range of field proven hardware platforms and combined with simple interfacing with a variety of industry standard GIS software.
The DIGICAT 200 GIS is an ideal solution for systems integrators seeking to integrate buried service locating with GIS and survey mapping processes, using industry standard wireless connectivity. The advanced data output format provides system integrators with the opportunity to further develop innovative data capture and operational management solutions to meet new market opportunities.
|
|
Weigh Modules and Force Transducers
* High accuracy
* Superior installation properties
* Withstands up to 100% side load
* For hard environmental conditions (IP67)
* Covers most applications
|
|
Newly Enhanced Sensitivity
for tough to locate pipes and cables
- Single-handed operation
- 2 buttons, 2 knobs (too easy)
- Change frequencies from the receiver
|
|
|
As with our magnetic locators, Schonstedt pipe & cable locators are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions. Our “P&C” line is quickly becoming the professional's choice for locating pipe and cable, but you don't have to be a pro to use these instruments. So even if you only have an occasional need to find pipe and cable underground, keep a Schonstedt in your kit.
|
|
| ... products without technical information |
| |
|
|
|
|
Air Wipe Blow-Off System - Ring-Blade™:
Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade™ Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade™ Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
• Blower air wipe and air knife systems are designed for any wire size and speed
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
Streamtek's Air Wipes provide a uniform 360º airflow ideal for drying, blowoff, cleaning, and cooling of extruded shapes, hose, pipe, cable, wire and more. The unique
FEATURES
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
- Amplification up to 25:1
- Greatly reduces noise (~75dBA)
SPECIFICATIONS
Stainless steel or aluminum are materials of construction. Six standard (inside) diameters: 1" (31mm), 2" (51mm), 3" (76mm), 4" (200mm), 5" (127mm), 6" (152mm). Other sizes available upon request.
|
|
Super Air Wipe™
EXAIR's Air Wipes provide a uniform 360° airstream ideal for blowoff, drying, cleaning, and cooling of pipe, cable,
Five Year Built to Last Warrantyextruded shapes, hose, wire and more. The unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
Two styles are available:
The Super Air Wipe resists corrosion and is ideal for high temperatures up to 800°F (427°C). It is constructed using stainless steel screws, shims along with a stainless steel wire braided coupling hose (for sizes up to 4" (102mm)).
The Standard Air Wipe is a good choice when stainless steel screws and shims are not required. A general purpose PVC coupling hose is included (for sizes up to 4" (102mm)).
|
|
|
|
|
|
Air Wipe Blow-Off System - Ring-Blade™:
Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade™ Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade™ Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
• Blower air wipe and air knife systems are designed for any wire size and speed
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
Streamtek's Air Wipes provide a uniform 360º airflow ideal for drying, blowoff, cleaning, and cooling of extruded shapes, hose, pipe, cable, wire and more. The unique
FEATURES
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
- Amplification up to 25:1
- Greatly reduces noise (~75dBA)
SPECIFICATIONS
Stainless steel or aluminum are materials of construction. Six standard (inside) diameters: 1" (31mm), 2" (51mm), 3" (76mm), 4" (200mm), 5" (127mm), 6" (152mm). Other sizes available upon request.
|
|
Super Air Wipe™
EXAIR's Air Wipes provide a uniform 360° airstream ideal for blowoff, drying, cleaning, and cooling of pipe, cable,
Five Year Built to Last Warrantyextruded shapes, hose, wire and more. The unique, split design makes it easy to clamp around the surface, eliminating the need for threading.
Two styles are available:
The Super Air Wipe resists corrosion and is ideal for high temperatures up to 800°F (427°C). It is constructed using stainless steel screws, shims along with a stainless steel wire braided coupling hose (for sizes up to 4" (102mm)).
The Standard Air Wipe is a good choice when stainless steel screws and shims are not required. A general purpose PVC coupling hose is included (for sizes up to 4" (102mm)).
|
|
... see all the products in the category
Air knifes
|
ENGINE: Cummins 6BTA5.9 (185 HP) POWER TRAIN
POWER TRAIN:
* Transmission: Franklin P4-385, 4 speed powershift
* Torque Converter: Clark 13.7 Inch
* Axles: Franklin F-320 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service: Enclosed multi-disc wet brake
* Brakes, Parking: Spring applied, hydraulic released
|
|
ENGINE: Cummins 6BT5.9 (174HP)
POWERTRAIN:
* Transmission Franklin P4-385, 4 speed powershift
* Torque Converter 13.7 Inch
* Axles: Standard - Franklin F-240 Heavy Duty Planetary, Optional - Franklin F-257 Heavy Duty Planetary
* Differentials: Lock-In/Lock-Out Front and rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, Hydraulic released
|
|
ENGINE:
* Cummins 6BTA5.9 (200 HP)
POWER TRAIN:
* Transmission Franklin P6-410, 6 speed powershift
* Torque Converter Clark 13.7 Inch
* Axles Franklin F-345 Heavy Duty Planetary
* Differentials Lock-In/Lock-Out Front, No-Spin Rear
* Brakes, Service Enclosed multi-disc wet brake
* Brakes, Parking Spring applied, hydraulic released
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
