|
|
This product is not suitable for CN and PK push-in fittings.
Polyurethane tubing is highly resistant to abrasion, pressure and wear, offers outstanding resistance to kinks, excellent tensile and tear propagation strength, very good cushioning capacity and temperature flexibility. It is also highly resistant to oil, grease, oxygen and ozone. Deformation is kept to a minimum even under long-term stress. Each of the different polyurethane types has different specific characteristics.
- Outside diameter per CETOP RP 54 P
- FDA food industry approval
- German Technical Control Board (TÜV) tested
- Halogen-free
- Hydrolysis resistant
- Microbe resistant
- Suitable connectors: QS, QS-F, CRQS, CK, CN
- Media: Compressed air and vacuum, Water (except potable water)
|
|
Beat the heat and the cold
Gates' special high/low temperature hoses recommended for high-pressure hydraulic lines and developed for use on many types of machinery and other applications where heat or cold threatens your hose's life.
Key benefits:
- Easy to route and to install in tight areas
- Lightweight
- Alternative to spiral hoses in high pressure lines where flexibility is required
- Superior impulse performance: tested up to 600,000 impulse cycles
- Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
Our ranges:
- G2H: a range of two wire braid hoses for oil temperatures up to 135°C
- G2XH: a range of two wire braid hoses for oil temperatures up to 150°C
- M3KH: the constant pressure hose range for applications up to 21.0 MPa (3,000 psi) and oil temperatures up to 121°C
- M4KH: the constant pressure hose range for applications up to 28.0 MPa (4,000 psi) and oil temperatures up to 121°C
- G2L: a range of two wire braid hoses for oil temperatures from -57°C up to 100°C
- C1TH: a range of one wire braid hoses for oil temperatures up to 135°C
- G1H: a range of one wire braid hoses for oil temperatures up to 135°C
- ACR: a range of one wire braid hoses for oil temperatures up to 150°C
|
|
Medium and high temperature hose with external helix for temperatures from –260 °C up to +1.100 °C
Applications:
-Ducting of hot and cold air
-Air conditioning/ventilation
-Vehicle construction
-Engine construction
-Aircraft industries
-Defence industries
-Exhaust fume equipment
-Extraction of corrosive media
-Chemical plants
Properties:
-High temperature resistance
-Flexibility
-Small bend radius
-Chemical resistance
-External steel helix protects against abrasion
-Special clamping method guarantees high tensile strength between hose material and external helix
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors
|
|
Applications
Suction and blast hose, especially suitable:
- for gaseous media such as vapors and smoke
- for de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust
- as bellows and compensator
- for applications, where flame-retardant hoses are demanded
- for solids such as dust, powder and fibres
Properties
- very good heat resistance
- highly flexible and compressible 4:1
- abrasion protection via external clamp profile
- firm clamping of the wall in clamp profile
- small bending radius
- kink-proof
- minimum weight
- flame-retardant according to: DIN 4102-B1 |
|
Filton recommend that their Rotary Unions are connected by flexible hoses. Hoses to carry air, water, gas, steam, hot oil services and low pressure oil are all available.
Hoses can be supplied in various lengths with a variety of ends if required including fixed male, swivel male, fixed female, fixed flange and swivel flange. |
|
NORRES-Metal hoses have the following characteristics:
- especially sturdy
- can be used in many applications
- high temperature resistance in many cases
- electrically conductive metal wall
Applications
Suction hoses, transport hoses especially suitable:
- for solids such as powder, chips, granulates, sand gravel, grain
- for gaseous media
- for silo vehicles
- for de-dusting and suction plants, air conditioning and ventilation technique
- as robust protection hose
- as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc.
Properties
- abrasion-proof
- flexible
- very robust
- capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding.
Temperature Range
Up to +600°C approx.
Cable protection hoses for electric installation, fexible shafts, for hydraulic and pneumatic hoses
Coolant hoses for supplying of cooling media or air to cutting and processing machines
|
|
Plastic Tubing
(pictured) Multi-Color Ribbon Tubing
Multi-Color Ribbon Tubing commonly known as MCR, is a cost effective method of routing two of more tubing lines. Made from 95 durometer Polyurethane, MCR can be installed faster than other jacketing options. MCR color codes tubing for indentification, tracing, or troubleshooting. MCR with withstand the rigors of flexing, yet be easily separated for routing.
Other types of Plastic Tubing that Coilhose Pneumatic offers:
Polyurethane Tubing
Nylon Tubing
Polyurethane Tubing
Polyvinyl (PVC) Tubing
Spark-Lin Weld Spatter Resistant Tubing
D.O.T. Air Brake Tubing
Tubing Cutter
Hose Cutter
Tube Channels
|
|
The Verderflex product group consists of a well-balanced high quality range of peristaltric tube pumps (Verderflex-Smart series), industrial hose pumps (Verderflex
VF series) and dosing units (Verderflex Genie).
As with all series of Verder pumps, current emphasis is on reduced downtime with minimal maintenance, easy operation and continuous quality improvement. All products are also covered by a two-year warranty on the pumps.
|
|
Watson-Marlow tubing is available in seven materials and over forty sizes, giving an extraordinary range of chemical and application capability. Watson-Marlow pumps are designed for Watson-Marlow tubing tolerances and performance, and no other tubing will provide comparable results.
Materials include; Marprene, Bioprene, PumpSil,
Sta-Pure, Chem-Sure, Silicone, PVC, Neoprene and Fluorel. |
|
Tubing and hoses
The tubing is as important as the pump because:
Its restitution creates suction lift
Its strength resists pressure
Its flex resistance determines pumping life
Its bore decides the flow rate
Its wall thickness controls pumping efficiency.
Ordinary tubing is not designed for peristaltic pumping, and only Watson-Marlow precision pump tubing will give the best results in a peristaltic pump. The results of using any other tubing are unpredictable, and may jeopardise your process.
Hoses for high pressure hosepumps
Watson-Marlow Bredel's innovative hose design and unique ground construction has created the benchmark in hose performance and life. The unique design ensures that compression forces are evenly applied, and the enormous restitutional ability of the hose creates powerful suction handling and accurate metering capabilities. |
|
| Polyether-based polyurethane tubing offers excellant resistance to chemicals,kinking,abrasion hydrolysis,oxidation and ozone.It is excellant in applications requiring superior toughness and resistance to tear,abrasion,oxidation,fungus and humidity. |
|
Applications
Universal suction and blast hoses, pressure hoses, suction and transport hoses especially suitable (super light to super heavy hoses):
- for solids such as dust, powder, fibres, chips and granulates
- for domestic and industrial vacuum cleaners, for cleaning swimming pools, building drying and welding gas extraction, for de-dusting and suction plants, for pressure and vacuum pumps
- for gaseous and liquid media
- for air conditioning and ventilation
- for industry, agriculture and construction engineering
- for reducing the ground water level
- as robust protection hose
Properties
- good resistance to chemicals
- good resistance to alkalis and acids
- good resistance to UV and ozone
Temperature Range
-20 °C approx. to +85 °C approx.
Wall thickness
From 0,25 to 8 mm
|
|
Versilic®Tubing
60 shore Versilic® tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50°C and maintains its chemical, mechanical and electrical performance up to +200°C. It meets European Pharmacopoeia (3rd Edition) chemical tests requirements, USP XXIII Class VI biological tests and ISO 10993 biocompatibility (General toxicology-irritation & sensitization-cytotoxicity-homocompatibility). It meets FDA and BgVV positive lists as well as food grade tests according to EC directives. This silicon tubing is a non-invasive medical device tube. It may be used for blood contact with up to 29 days.
|
|
Watson-Marlow state-of-the-art Pumpsil platinum-cured silicone tubing with unique LaserTraceability
Watson-Marlow has invested in an on-site class-J clean room and computer-controlled extruders to produce the world's finest pharmaceutical-quality platinum-cured silicone tubing with:
- Size and lot code laser-etched on to the tubing surface
- Complete USP Class VI, FDA and NSF validation pack
- Ultra-pure non-leaching platinum cure
- Laser and ultrasonic tolerance control for precision performance
|
|
Type PFAN temperature and chemical resistant tubing. The high-end tubing which stands up to practically all ambient influences.
Variants and functions:
- Highly resistant to chemicals (even extremely pure acids)
- Temperature resistance: 20 to +150° C (unpressurised from 70 to 260° C)
- FDA approval §177.1550 for use in food processing, approved for contact with food products
- Excellent UV stability
- Flame retardant per UL 94 V0
- Colourless
- Free of paint wetting impairment substances
- No tendency to develop tears in the longitudinal direction (as opposed to Teflon)
|
|
TPV (thermoplastic vulcanisates) suction and transport hoses for increased temperatures
available in lightweight up to medium weight qualities,
DN 25 - 500
Temperature range: -40 °C - 130 °C, intermittent up
to +150 °C
Applications:
- suction of steam
- suction and extraction of air in engine construction
- transport of hot and cold air in vehicle and engine
construction
Properties:
- good chemical resistance
- gas tight
- extremely flexible
- small bend radius
- nearly smooth inside
- optimum flow characteristics
- electrically conductive to BGR 132 by grounding spiral
Installation and connecting possibilities:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU DIN flanges, quick action cone flange joint system
Further hose qualities:
abrasion resistant
hardly inflammable
|
|
Tygoprene® Tubing
Alternative to silicones and PVC when longer pump tubing life on peristaltic pump is required Tygoprene® XL-60 offers an outstanding flexibility, a resistance to ozone, oxygen and ageing.
Translucent to ease visual inspection, it offers also excellent chemical resistance to a wide range of fluids, including acids and bases. As Tygoprene® has low extractables, it is an ideal choice for dosing and transfer ink, detergents and food products.
In house testing also indicates a UL 94-HB flammability rating. |
|
Tygon® 2075 ultra chemical tubing
Tygon® Ultra Chemical Resistant Tubing offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® 2075 is virtually unaffected by acids, bases, ketones, salts and alcohols, fitting the requirements of many applications from battery acid filling to hazardous material handling. It's entirely plasticizer-free, eliminating fluid contamination and the premature embrittlement and cracking common with many flexible tubings. Its exceptionally smooth inner surface inhibits particulate buildup and reduces the potential for
contamination. |
|
Hoses with neoprene or silicone coated glass fabric with one or two layers.
Temperature range: from –55 °C up to +300 °C Standard production: Diameters from DN 13 up to DN 305
Applications:
Conveying of air or gaseous media with high gas or environmental temperatures
Vehicle construction
Aircraft industry
Ship building industry
General engineering and engine construction
Chemical industry
Plastics production
Hot air hose for granule dryers
Incineration plants
Properties:
Highly flexible
Lightweight
Small bend radius
Nearly smooth inside
Symmetrically bending
Kink proof
Free of halogens
Good chemical resistance
Immovable vulcanised wall and spring steel spiral
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors |
|
EPDM Chemical Suction Hose - Novaflex 4200
EPDM Chemical Suction Hose
EPDM Chemical Discharge Hose - Novaflex 4201
FEP Chemical Transfer Hose - Novaflex 4600
FEP Chemical Transfer Hose
UHMWP Chemical Suction & Discharge Hose - Novaflex 4700
UHMWP chemical suction & discharge hose
UHMWP Chemical Suction & Discharge Hose - Novaflex 4705
UHMWP Chemical Suction & Discharge Hose
|
|
Textile Air Hose - Novaflex 1000
Textile Air Hose - Novaflex 1011
Hot Air Blower - Novaflex 1208
Hot Air Blower - Corrugated - Novaflex 1971
Oxygen Charging Hose - Novaflex 9131
Oxygen Charging Hose
|
|
| These breathing-air hoses are unique in the market; they are antistatic and feature a hytrel inner lining to prevent microbiological growth. Manufactured from PVC these hoses are virtually odour free and have been designed to EN14593 and EN14594. The hoses are, however, available at prices competitive with other hoses on the market which have less features. |
|
EIGERFLEX® is the flexible system, with or without a self-regulating frost protection strip, for cold water and waste water pipes. Operating temperature up to 30 °C, operating pressure up to 16 bar.
Areas of application
Cold water and waste water pipes which have to remain cool or which cannot be laid at depths that are safe from frost. |
|
FHK pipe system
Flexible, endless production, double-walled, monitorable and self-compensating pipe system, -170°C to +150°C, PN 16/25, DN 25-150. Medium pipe: special steel, heat insulation: PUR
Properties:
FLEXWELL district heating cable ® (FHK) is a pipe system that offers a high level of safety thanks to its double-walled design (with metal inner and outer pipes) and its integrated monitoring system. |
|
BELL suggests and supplies the EUROPOWER hose 352 type for the whole range of pumps.
It is a flexible hose for great perfomances, created for higher mecanichal and dynamic standards, with a more longevity and excellent flexibility.
Particularly useful for hydraulic systems with very high pressure and it is compatible with hydraulic oils, lubricants, minerals and phosphats. |
|
Properties:
LUNARFLEX® is designed as a double pipe. In small dimensions, the medium pipes are made of soft copper but helically corrugated special steel is used for the larger dimensions.
The heat insulation consists of a flexible, UV-resistant, CFC-free EPDM foam with excellent thermal insulation properties. The outer casing consists of a UV-resistant filament reinforced with special steel wire (to protect against pecking by birds).
Guaranteed time savings
Thanks to their narrow bending radii, LUNARFLEX® pipes can be positioned in existing shafts or profiles in the building and on the facade.
Very short installation times and processing without special tools - two more attributes that make LUNARFLEX® the technically perfect solution for connections between solar collectors and heat accumulators.
Areas of application
LUNARFLEX® is used as a transport pipe for heat transfer fluid between solar collectors and hot water storage tanks. |
|
Developed for the low-temperature range
CALPEX® is a flexible, self-compensating, continuous and heat-insulated pipe system with a medium pipe made of cross-linked polyethylene.
No underground connections
CALPEX® district heating pipes can be supplied in rings of up to 807 m in one piece, depending on the dimensions. This largely eliminates underground connection points.
Area of application:
Heat supply pipes, drinking water transportation, drainage/waste water systems, cooling plants, swimming bath technology and agricultural applications are just a few examples from our extensive list of references. |
|
... see all the products in the category
Hoses
|
|
|
