|
|
FHK pipe system
Flexible, endless production, double-walled, monitorable and self-compensating pipe system, -170°C to +150°C, PN 16/25, DN 25-150. Medium pipe: special steel, heat insulation: PUR
Properties:
FLEXWELL district heating cable ® (FHK) is a pipe system that offers a high level of safety thanks to its double-walled design (with metal inner and outer pipes) and its integrated monitoring system.
|
|
exhaust gas hoses for temperatures up to + 1.100 °C (when exhaust gas funnels are used properly and fresh air is feed enough), DN 16 - DN 500.
Applications:
Extraction of engine exhaust gases, for all usual suction extraxtion systems such as hose reel, slotted channels, abovefloor and underfloor extraction, stationary suction plants, flue gas exhaust, vehicle construction, engine construction, aircraft industries, defence industries, general engineering, hot air, low pressure applications, furnace construction, iron- and steel works, infrared dryer plants, radiant heat protection ...
Properties:
extremely flexible, small bend radius, very lightweight,
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors
|
|
Suction and transport hoses, made of polyurethan (PU), polyolefin, (PO) and silicone, with non rusting spring steel wire
Applications:
Food industry
pharmaceutical industry
comestics industry
chemical industry
the raw materials comply with the legal foodstuffs directives:
EC-line 2002/72/EG
2004/19/EG
FDA-directives
21 CFR 177.1680
21 CFR 175.105
21 CFR 177.2600
Properties:
- taste and odourless
- extremely flexible
- small bend radius
- gas tight
- smooth inside
- optimum flow characteristics
- high tensile and burst strength
- free of platizisers and halogens
- generally good UV and ozone resistance
- good chemical resistance
- electrically conductive to BGR 132 by grounding spiral on both sides
Installation and connection possibilities:
Combiflex connecting system:
FDA-approved cast-on swivel, fixed and cone flanges as well as threaded sockets
Further installation and connection possibilities:
- hose clamps made of stainless steel, hose reducers, hose connectors, heat shrink cuffs
|
|
|
We design and manufacture a comprehensive range of high quality products suitable for use in even the most demanding oil and gas drilling and well completion activities. At our state-of-the-art fully-integrated manufacturing facilities we can produce seamless steel pipe from 1 1/3" to 28" (outside diameters).
|
|
Applications Examples:
-Compound machinery/ hot glue, packaging, label machinery
-Surface protection/ tar and painting machinery
-Food processing industry, fill machinery
-Foam machinery, PU-foaming, roof renewal,packaging machinery
-Epoxy sap machinery
-Washing benches, steam cleaner, pipe cleaning
-Fill tubing and silo tubes
-Tanker tubing
-Glass industry, for coating and glueing from thermo glass panels
|
|
Properties :
Application ==> Medium pressure circuits with restricted installation spaces, pre-control hoses
Standard ==> EN 857 1 SC
Inner layer ==> oil resistant synthetic rubber
Insert ==> one high tensile steel wire braided insert
Outer layer ==> oil resistant and weatherproof synthetic rubber
Colour ==> black
Min. temperature - 40 °C Max. temperature + 100 °C
Elongation + 2 % to - 4 %
Special features ==> narrow bending radius
Media : *Mineral oil
*Polyglycol based oil
*Water oil emulsions
*Water (0°C to + 70°C)
|
|
Metal Flexible Hose
Multi-Purpose Push-On Hose
PTFE-Lined, Stainless Steel Braided Hose
Thermoplastic Hose
|
|
Properties:
LUNARFLEX® is designed as a double pipe. In small dimensions, the medium pipes are made of soft copper but helically corrugated special steel is used for the larger dimensions.
The heat insulation consists of a flexible, UV-resistant, CFC-free EPDM foam with excellent thermal insulation properties. The outer casing consists of a UV-resistant filament reinforced with special steel wire (to protect against pecking by birds).
Guaranteed time savings
Thanks to their narrow bending radii, LUNARFLEX® pipes can be positioned in existing shafts or profiles in the building and on the facade.
Very short installation times and processing without special tools - two more attributes that make LUNARFLEX® the technically perfect solution for connections between solar collectors and heat accumulators.
Areas of application
LUNARFLEX® is used as a transport pipe for heat transfer fluid between solar collectors and hot water storage tanks.
|
|
Properties:
Application ==> Low pressure hose for general applications
Standard ==> EN 854 1 TE
Inner layer ==> oil resistant synthetic rubber
Insert ==> one textile braided insert
Outer layer ==> oil resistant and weatherproof synthetic rubber
Colour ==> black
Min. temperature - 40 °C Max. temperature + 100 °C
Elongation + 2 % to - 4 %
Media : *Mineral oil
*Glycol
*Water oil emulsions
*Water (0°C to + 70°C)
|
|
Medium and high temperature hose with external helix for temperatures from –260 °C up to +1.100 °C
Applications:
-Ducting of hot and cold air
-Air conditioning/ventilation
-Vehicle construction
-Engine construction
-Aircraft industries
-Defence industries
-Exhaust fume equipment
-Extraction of corrosive media
-Chemical plants
Properties:
-High temperature resistance
-Flexibility
-Small bend radius
-Chemical resistance
-External steel helix protects against abrasion
-Special clamping method guarantees high tensile strength between hose material and external helix
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors
|
|
|
We design and manufacture a comprehensive range of high quality products suitable for use in even the most demanding oil and gas drilling and well completion activities. At our state-of-the-art fully-integrated manufacturing facilities we can produce seamless steel pipe from 1 1/3" to 28" (outside diameters).
|
|
Developed for the low-temperature range
CALPEX® is a flexible, self-compensating, continuous and heat-insulated pipe system with a medium pipe made of cross-linked polyethylene.
No underground connections
CALPEX® district heating pipes can be supplied in rings of up to 807 m in one piece, depending on the dimensions. This largely eliminates underground connection points.
Area of application:
Heat supply pipes, drinking water transportation, drainage/waste water systems, cooling plants, swimming bath technology and agricultural applications are just a few examples from our extensive list of references.
|
|
Flexiline
Ptfe lined metalic flexible houses with
or without braid: smooth, convoluted,
corrugated and antistatic.
|
|
Features :
Application ==> Medium pressure applications with hydraulic fluids at high temperatures and with aggressive media for the chemical industry, surface technology, 2 component systems
Inner layer ==> PTFE
Insert ==> one stainless steel braided insert
Outer layer ==> none
Colour ==> metallic
Min. temperature - 70 °C Max. temperature + 260 °C
|
|
Properties:
Application ==> general application for air, water etc.
Inner layer ==> Soft PVC
Insert ==> none
Outer layer ==> Soft PVC
Colour ==> clear
Min. temperature - 20 °C Max. temperature + 60 °C
Special features without textile insert and Hardness: approx. 77° Shore A Media : *Air
*Water
|
|
Moss continually extends and develops its range of products, with over 10,000 standard lines, all available from stock for same day despatch. The company's full range of products is represented in our latest catalogue which contains 15 sections covering:
Caps and plugs
Hydraulic protection
Protective netting and transit protection
Pipe protection and flange covers
High temperature masking
Security seals
Fasteners and fixings
Cable ties, cable management and accessories
PCB Supports and spacers
Feet and castors
Handles and knobs
Tube inserts, connectors and ferrules
Furniture accessories & point of sale
Latches, catches and hinges
Packaging, scoops and beakers
|
|
Niro-Flex hoses are additionally equipped with a stainless steel neeting to protect them from mechanical outside influences
The hoses are even of the stainless steel netting very flexible and have an external diameter of 50mm and inner diameter of 8mm. They are constructed to work at temperatures up to 200°C and are pressure resistant up to 200bar.
|
|
TPV (thermoplastic vulcanisates) suction and transport hoses for increased temperatures
available in lightweight up to medium weight qualities,
DN 25 - 500
Temperature range: -40 °C - 130 °C, intermittent up
to +150 °C
Applications:
- suction of steam
- suction and extraction of air in engine construction
- transport of hot and cold air in vehicle and engine
construction
Properties:
- good chemical resistance
- gas tight
- extremely flexible
- small bend radius
- nearly smooth inside
- optimum flow characteristics
- electrically conductive to BGR 132 by grounding spiral
Installation and connecting possibilities:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU DIN flanges, quick action cone flange joint system
Further hose qualities:
abrasion resistant
hardly inflammable
|
|
Specially designed for vacuum applications
High flexibility and minimum curvature radiuses make it ideal for cable chains.
|
|
Hoses with neoprene or silicone coated glass fabric with one or two layers.
Temperature range: from –55 °C up to +300 °C Standard production: Diameters from DN 13 up to DN 305
Applications:
Conveying of air or gaseous media with high gas or environmental temperatures
Vehicle construction
Aircraft industry
Ship building industry
General engineering and engine construction
Chemical industry
Plastics production
Hot air hose for granule dryers
Incineration plants
Properties:
Highly flexible
Lightweight
Small bend radius
Nearly smooth inside
Symmetrically bending
Kink proof
Free of halogens
Good chemical resistance
Immovable vulcanised wall and spring steel spiral
Installation and connection possibilities:
- hose clamps
- hose reducers
- hose connectors
|
|
Recommended for:
Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance service applications. Grey and blue PowerWash are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance. Not recommended for steam service.
Couplings: MegaCrimp®.
|
|
Recommended for: Hydraulic pilot control applications in confined spaces in industrial, construction and agricultural equipment, designed for superior signal response.
Couplings: P1T range of compact couplings.
Characteristics/benefits: Very high flexibility, lightweight and extremely tight bend radii.
Superior resistance to kinking.
Developed for high hose-to-hose abrasion resistance.
Tested beyond 800,000 impulse cycles.
Superior signal response through minimal expansion under pressure.
|
|
The Universal Pipe System.
- Flexible pipe system for cooling and lubricating when sawing, drilling, turning, grinding and eroding with an opening of 1/4" (6.35 mm)
- Dimensionally stable through tight fitting components, i.e. will not alter under pressure or machine vibrations
- Resistant to chemicals and solvents, not electrically conductive. Compatible with related systems.
The Universal Pipe System.
- Flexible pipe system for cooling and lubricating when sawing, drilling, turning, grinding and eroding with an opening of 1/2" (12.7 mm)
- Dimensionally stable through tight fitting components, i.e. will not alter under pressure or machine vibrations
- Resistant to chemicals and solvents, not electrically conductive. Compatible with related systems
|
|
Chemical hoses from ContiTech cover the whole spectrum of standard hoses for the chemical and pharmaceutical industries in accordance with EN 12115.
Special processes - some of them patented - provide for safe transport of various media. This includes both hoses with elastomer inner linings as well as plastic-clad ones.
New innovations include hoses with light-colored plastic lining. With their integrated conductor helix, the hoses comply with all requirements for a Ω hose as contained in EN 12115 while at the same time guaranteeing product purity.
Process-patented petrol pump hoses from ContiTech do not bleed colors and are conductive, extremely lightweight, flexible, buckle-proof and weather-resistant. They can be rolled up, have an extremely smooth, bright-colored finish and guaranteed calibratable volume increase. The compounds used allow for good resistance to swelling and diffusion. The "hose-in-hose" principle provides for automatic gas recirculation - and thus contributes actively to protecting the environment and human health.
|
|
General description : Viking
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability, key factors when life may depend upon it.
Viking is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance.
Specifications
Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies. Report no. aval lable on request.
Features :
- Excellent heat resistance - cover provides good protection against accidental contact with embers
- Oil and chem ical resists nt - construction and blend of pvc/ nit rile rubber gives good resistance against contact with a wide range of chemical products
- Weather resistant -excellent resistance sgai nst ozone and
atmospheric weatheringand good performance at both high and low temperatu res
- Maintenance free-does not need drying, unaffected by mildew, rot-proof and waterproof
- Easy to repair-a comprehensive, easy to use repair kit is available
|
|
SAT tubing is produced with specially designed exstruders and extrusion process in clean-room, we use only PFA and FEP UHP certificated, SAT is certified ISO 9001, during the exstrusion we have the costant control of the OD and ID by electronic laser and a sy for the discharge of the electrostatic charge, all the components of the exstruder are manufactured with special materials that don't release impurity. Tubing cleanliness is maintained during and after extrusion including continue nitrogen purge, immediate capping and packaging in heat-sealed double polyethylene bags. The tubing coils are stocked in clean-room.
SAT PFA and FEP tubing Feature:
- Low levels of extractable fluoride ions
- Improved crack resistance and strength
- Improved chemical resistance
- Excellent resistance to extremes of temperature
- Reduced chemical carryover and permeability
- Improved wash ability through generated charge levels and smoother surfaces
- Non-flammability
- Reduced ionic attraction
- High resistance to weater and ageing
- Ecellent dielectric properties
- Non-stick characteristics
- Increased mechanical abilities
- Higher burst pressure
|
|
Fuel Hoses and Hose Lines
We develop and produce complete line systems from the tank through to the engine. Our systems comply are cost-efficient and easy-to-install. Our special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. Our product range includes supply and return lines and ventilation lines.
The Product Range Covers
- supply and return lines
- ventilation hoses and
- tank fillers
|
|
Description:
Pipe for harsh environments.
Tube intern combined with hexagonal ceramics plates.
Advantages:
New technology on the market.
High internal abrasive resistant
Long life of life.
Applications:
Harsh environments (steel-works, thermo plants, cement factories, mines,...).
Nanomaterials aspiration and repression very abrasives (dry cement, powder of coal, minerals hard).
|
|
Industrial hoses and accessories
ERIKS is the leading European innovative hose supplier. ERIKS offers a high quality range of hoses, couplings and expansion bellows and also supplies related technical services.
Sales program
* rubber hoses
* plastic hoses
* metal hoses
* PTFE hoses
* composite hoses
* compensators
* hose couplings
* threaded- and flange couplings
* dry-break and quick couplings
Accessories
* hose reels
* hose bun
* hose clamps
Specials
* hoses safe to use in Ex-zones (ATEX)
* animal derived ingredients - free hoses
* full - ohm hoses
Production and added value
* application know-how for all branches of the industry
* specific custom made solutions
* high quality assembly equipment
* optimum assembly of couplings on the hose
* test facility (up to 3000 bar)
* material and test certificates
* on-site hose testing
* research & engineering
* certified welding
* C.N.C. machine park
Private branding
* RX-hoses
* LMC couplings
|
|
Radior DIN 6
Remain cool with pipe RADIOR DIN 6!
Technical description:
The tube and the external dress are in conformity with DIN standards 73411 - 1996 in the following fields: elasticity, resistance, density, hardness, setting, swelling, ageing and residues dry
Constant operating pressure of 6 bar
Beach of temperature going up to +125 °C.
Advantages:
Supplements the range of pipes warm water and vapor in accordance with the last international standards in force
Specific textile reinforcement ensuring an optimum safety high pressures and temperatures.
Applications: Pipe adapted perfectly for the fixed cooling systems and of refrigeration and engines.
|
|
... see all the products in the category
Hoses
|
|
|
