|
|
Properties:
LUNARFLEX® is designed as a double pipe. In small dimensions, the medium pipes are made of soft copper but helically corrugated special steel is used for the larger dimensions.
The heat insulation consists of a flexible, UV-resistant, CFC-free EPDM foam with excellent thermal insulation properties. The outer casing consists of a UV-resistant filament reinforced with special steel wire (to protect against pecking by birds).
Guaranteed time savings
Thanks to their narrow bending radii, LUNARFLEX® pipes can be positioned in existing shafts or profiles in the building and on the facade.
Very short installation times and processing without special tools - two more attributes that make LUNARFLEX® the technically perfect solution for connections between solar collectors and heat accumulators.
Areas of application
LUNARFLEX® is used as a transport pipe for heat transfer fluid between solar collectors and hot water storage tanks. |
|
Abrasion resistant PU suction and transport hoses with immovable cast spring steel spiral, DN 16 - DN 500.
Available in lightweight up to heavy qualities.
Hose wall from 0,7 mm up to 4,8 mm.
Temperature range: -40 °C up to +90 °C, intermittent up to +125 °C.
Applications:
suction and transport hoses for extremely abrasive materials, gaseous and liquid media, oil spray extraction, protection hose against mechanical pressure.
Properties:
- extremely abrasion resistant
- resistant to oils and fuels
- gas tight
- good chemical resistance
- free of plastizisers and halogen
- generally good UV and ozone resistance
- very flexiblel, reduced weight
- small bend radius
- nearly smooth inside
- optimum flow characteristics
- electrically conductive to BGR 132 by grounding spiral
Recommended connecting elements:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU DIN flange, quick action cone flange system, PU threaded socket
Hoses are also available in the following qualities:
- hardly inflammable and crush resistant
- microbe and hydrolysis proof
- food quality (FDA)
- antistatic and electrically conductive
|
|
Compared with many other plastic hoses, NORRES polyurethane hoses (PUR) have the following distinguishing characteristics:
- less wear (about 2.5 to 5 times better than rubber and about 3 to 4 times better than many soft PVC), better service life in pumping processes
- light and flexible
- it is possible to observe the pumping and transport process with transparent and partially-coloured hoses
- excellent mechanical strength
- good chemical resistance
- good resistance to UV and weathering
Applications
Universal and abrasion-proof suction, transport and blast hoses, especially suitable (light to super heavy hoses):
- for abrasive solids such as dust, powder, fibres, chips, granulates
- for gaseous and liquid media
- for de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibres, granulate conveying systems, printing machines, blowers and compressors
- for roof gravel conveying, silo loading
- as conveying and head hose for suction vehicles, as conveying hose in glassworks, steel works
- as resistant protections hose
Temperature Range
-40 °C approx. to 90 °C approx.; short time to 125 °C
Wall thickness:
From 0,4 to 6 mm
|
|
PU suction and transport hoses, electrically conductive ≤ 10 4 Ohm.
Available in lightweight up to heavy qualities, hose wall: 0,7 mm up to 2,1 mm, DN 16 - DN 500
Applications:
dangerous areas, where electr. conductivity is demanded; suction and tramsport hoses for abrasive materials, gaseous and liquid media, oil spray extraction, protection hose against mechanical pressure
Properties:
- abrasion resistant
- resistant to oil and fuels,
- gas tight
- good chemical resistance
- free of plastizisers and halogens
- generally good UV and ozone resistance
- very flexible, lightweight
- small bend radius
- nearly smooth inside
- optimum flow characteristics
- electrically conductive to BGR 132 by grounding spiral
Installation and connecting possibilities:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU-DIN-flanges, quick action cone flange joint system, PU threaded socket
|
|
Hardly inflammable PU suction and transport hoses,
available in lightweight up to heavy qualities, DN 16 - DN 500
Temperature range: -40 °C up to +90 °C,
intermittent up to +125 °C
Applications
Hardly inflammable PU hoses for abrasive materials, woodworking machines, chips exhaust in woodworking industries, protection hose against mechanical pressure
Properties:
- hardly inflammable acc.to DIN 4102 BI
- extremely flexible, small bend radius
- extremely abrasion resistant
- generally good UV and ozone resistance
- nearly smooth inside, optimum flow characteristics
- crusch resistance (only Master-PUR STEP)
Recommended connecting elements:
hose clamps, hose reducers, hose connectors
Combiflex connecting system:
PU cuffs, PU DIN flange, quick action cone flange system, PU threaded socket
Hoses are also available in the following qualities:
- microbe and hydrolysis proof
- food quality (FDA)
- antistatic and electrically conductive
|
|
Solution du produit:
-Une construction de tuyaux orientée vers l'aspiration de poussières de bois et de copeaux
- l'utilisation de matières premières précisémment définies pourvues d'une meilleure résistance en contact avec les divers sortes de bois et produits de protection du bois ainsi qu'avec une meilleure résistance mécaniquefont du TIMBERDUC® la solution pour le traitement et l'usinage du bois. |
|
PROTAPE® PUR 327 MEMORY
Special hose withstands frequent crushing. Its innovative design and the special properties of the raw materials make it ideal for long-term use in the open, no matter how abrasive the media conveyed.
PROTAPE® PUR 327 MEMORY
Applications:
Abrasion-proof suction and transport hose, especially suitable:
- for public utility street cleaning vehicles
- for lawnmowers, grass sweeping machines and leaves exhaust
- for abrasive solids such as dust, powder, fibres, chips and granulates
- for gaseous and liquid media
- for feed transport
Properties:
- vibration resistant
- crush-proof
- highly abrasion-proof
- flexible
- optimized flow properties
- high tensile strength and tear resistant
- microbe and hydrolysis resistant
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
- very good low temperature flexibility
- small bending radius
- softener and halogen free
- gas and liquid tight
Material:
- wall: special premium ether-polyurethane
- spiral: special hollow plastic helix
Wall Thickness: 0.9 mm approx.
Temperature Range:
- –40 °C approx. to + 90 °C approx.
- short time to 125 °C approx.
|
|
High Temperature Polyurethan Hose
Hoses made of HT-PUR are much more resistance to heat- up to a constant temperature of 125 °C, even short-term to 150 °C.
Applications
Universal and abrasion-proof suction and transport hose, especially suitable (light to heavy hoses):
- for abrasive solids solids such as dust, powder, chips, granulates and for high flow-rates extremely abrasive solids such as sand, gravel, refuse glass
- for gaseous and liquid media
for printing machines, blowers and compressors, for industrial vacuum cleaners, granulate conveying systems, for silo vehicles as conveying hose in glassworks, docks, steel works, stone pits, shipyards, cement works etc.
Properties
-very good heat resistance (better than comparable TPE and neoprene)
-highly abrasion-proof
- smooth interior
- optimized flow properties
- high tensile strength and tear resistance
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
-softener and halogen free
- gas and liquid tight
- capable of electro-static discharge by grounding the spiral
Material
- wall: special premium high-temperature-polyurethane (HT-PUR and Pre-PUR)
- spiral: spring steel wire
Temperature Range
-40 °C to 125 °C
- short time to +150 °C approx.
|
|
AIRDUC® PUR 350 MHF
Applications:
Universal and abrasion-proof suction and transport hose, especially suitable:
- for abrasive solids such as dust, powder, fibres and chips
- for gaseous media such as oil vapors and welding smoke
- for de-dusting and suction plants
Properties:
- super-light model
- highly abrasion-proof
- smooth interior
- flexible
- optimized flow properties
- high tensile strength and tear resistant
- food quality wall complies with: FDA 21 CFR 177.2600 + 178.2010, EC guideline 2002/72/EC
- approval according to EC guideline 2002/72/EC for the complete hose by independent institute
- microbe and hydrolysis resistant
- good resistance to mineral oils
- good resistance to chemicals
- good resistance to UV and ozone
- very good low temperature flexibility
- small bending radius
- softener and halogen free
- gas and liquid tight
- capable of electro-static discharge according to BGR 132
Material:
- wall: special premium ether-polyurethane
- spiral: spring steel wire
Wall Thickness: 0.7 mm approx.
Temperature Range:
- –40 °C approx. To + 90 °C approx.
- short time to 125 °C approx.
|
|
Microbe and hydrolysis resistant of NORRES consist in high quality ether-polyurethane and have the following characteristics:
- resistant to microbes (the chemical structure of ether-polyurethanes gives the materials permanent resistance to microbial attack)
- resistant to hydrolysis (this is critical for wet applications, at higher temperatures and for use in tropical climates)
- better chemical stability than comparable ester-polyurethanes
- better flexibility at low temperatures than comparable ester-polyurethanes
Applications:
Abrasion-proof suction, transport and blast hoses, especially suitable (super light to super heavy hoses):
- for abrasive solids such as dust, powder, granulates, sand, grain, refuse glass
- for gaseous and liquid media
- for public utility street cleaning vehicles
- for lawnmowers, grass sweeping machines and leaves exhaust
- for feed transport
Properties
- microbe and hydrolysis resistant
- highly abrasion-proof
- good resistance to mineral oils, chemicals, UV and ozone
- softener and halogen free
- capable of electro-static discharge (according to BGR 132) grounding the spiral
Temperature Range
-40 °C. to +90 °C approx.; short time to +125 °C
Microbe and hydrolysis resistant connecting parts
|
|
Maximum abrasion resistance, less wear and tear
Inline hose with 5.5 times service life
Masterflex AG has developed a unique process for producing hoses which are seamlessly smooth on the inside, thus achieving hose qualities with a previously unknown smoothness. “The Master polyurethane inline hoses offer the unique combination of maximum abrasion resistance with enormous wall thicknesses, low weight and amazing bending radii”, explains Detlef Herzog, Managing Director of Masterflex AG. “And so they are a real competitor to the heavy rubber hose.”
The patented process combines the advantages of the extruded hose with the special characteristics of the materials with which the hose’s smoothness is achieved. During manufacture, the hose is furnished with different hi-tech components. In the case of conventional hoses, the construction-induced weld seam is a major weak spot because the corrosion of the material to be conveyed takes place on the edges of the seam. By cleverly combining the materials, the hose is suitable for all manner of fields of application, specially for the transport of abrasive and corrosive media. Test results have shown that under comparable conditions the inline hose will last at least 5.5 times longer than the best rubber hose tested in the company’s laboratory using the procedure according to DIN 53516.
|
|
Air and Fluid Tubing - Nylon:
PLH-NP-2 Tubing and Connections, Air and Fluid
PLH-NP-4 Tubing and Connections, Air and Fluid
Air Tubing - Polyethylene:
H-2338 Tubing and Connections, Air
H-2339 Tubing and Connections, Air
Nylon Tubing Connections:
PLH-1438-SS Stainless Steel Connections
PLH-1414-SS Stainless Steel Connections
PLH-1838-SS Stainless Steel Connections
PLH-1438-SG-SS Stainless Steel Spring Guard Connections
PLH-1414-SG-SS Stainless Steel Spring Guard Connections
Polyethylene Tubing Connections:
P-HC-4216 Connections for Tubing
HC-4615 Connections for Tubing
P-HC-4221 Connections for Tubing
P-HC-4728 Connections for Tubing
P-HC-4215 Connections for Tubing
Fluid Quick Detachable Connectors:
P-HC-4808-1 Fluid Quick Detachable Connectors
HC-513-1 Fluid Quick Detachable Connectors
QDL-4808 Fluid Quick Detachable Connectors |
|
- nylon tubing: optimum mechanical properties and good chemical resistance
- polyurethan tubing: highly flexible for use in reduced spaces
- fluoropolymer FEP 140 tubing: excellent resistance to aggressive and corrosive agents
- anti-spark tubing: for welding applications
- anti-static tubing: prevents accumulation of electrostatic charge
- recoil tubing: in nylon and polyurethan
- self-fastening tubing: excellent resistance to hydrocarbons, abrasion and rupture
- braided PVC hose: translucent for visual checking of fluids
|
|
LPG®
Properties
Can be installed quickly and simply, with no need for welding or X-ray tests. Just single compression connectors at the start and end of the entire pipe
LPG®
Installation/assembly of a special steel pipe for high pressure, large lengths.
Area of application:
transport of liquid and gaseous media.
Structure
Flexible, endless production, single-wall, mechanically reinforced pipe system. Medium pipe: special steel |
|
- Tubes: rubber and plastic for laboratory and industry use
- Connectors: Nylon 11 metrology and regulation
- Connectors: ready to use
- Connectors: stick-on PVC |
|
For use at high temperatures
CASAFLEX® is a flexible, self-compensating, endless production, monitorable and heat-insulated pipe system with a special steel medium pipe.
Operational data
Excellent heat insulation at high temperatures
The diffusion barrier and the structure of the CASAFLEX® pipe system guarantee minimal heat losses as well as resistance to high temperatures. Operational temperatures up to 160 °C, peak temperatures up to 180 °C, PN 16/25, DN 20-50. |
|
Description:
Pipe for dairy applications.
Advantages:
- Smooth interior Dress.
- No retention of product.
- No contamination.
- Cleaning 150°.
- Sterilization of the product.
Applications:
Very flexible blue rubber pipe external especially studied for the aspiration & repression of the milk of the cisterns.
|
|
- Piping: rubber and plastic for all industries
- Connectors: all types, sliding valves, flap valves
- Hose band: clamp or crimp |
|
STENFLEX hoses provide safe connections whether in process technology, offshore applications, mechanical engineering, building engineering or as part of conveying systems. We specialize in versatility. Using rubber, stainless steel and PTFE: we provide the right hose connection for each application.
Functions at a glance:
- flex in almost any length of hose
- high absorption of lateral and angular motion
- compensate for imprecise assembly |
|
| These hose types are used to remove air, smoke, abrasive dust, swarf and hot particles. The profile geometry has been designed to ensure a high degree of flexibility and the insertion of additional metal threads or fibres during the winding process improves the air tightness characteristics of the hose. |
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
Visit our website below for a complete list of the hoses available
Heavy Duty hoses can be found on :
http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=15&search_app_ID=Go%21
Push on hoses can be found on :
http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=16&search_app_ID=Go%21 |
|
Goodyear offer a range of General purpose , Heavy duty and Push on hoses suitable for the air industry.
Visit our website below for a complete list of the hoses available
|
|
Goodyear has a selection of premium quality hoses available to handle the majority of today's industrial chemicals.
Visit our website below for a complete list of the hoses available |
|
Goodyear has a selection of premium quality hoses available to handle the majority of today's industrial chemicals.
Visit our website below for a complete list of the hoses available |
|
| Goodyear can offer a variety of Food Transfer hoses that comply to FDA standards. Visit our website below for a complete list of the hoses available |
|
Goodyear can offer a variety of Food Transfer hoses that comply to FDA standards. Visit our website below for a complete list of the hoses available
APPLICATION:
Goodyear's Exstatic® hose is for tank truck and/or in-plant transfer of dry,
bulk foodstuffs where there is a potential for electrical static build-up.
CONSTRUCTION:
TUBE: FDA UHMWPE (static dissipating/static conductive) has FDA/USDA compliant materials
COVER: Blue Plioflex® synthetic rubber (corrugated)/spiral transfer brand(wrapped impression)
REINFORCEMENT: Spiral-plied synthetic fabric with double wire helix
TEMPERATURE: -25°F to 180°F (-32°C to 82°C)
PACKAGING: 100' length, coiled, polywrapped
BRANDING: Continuous spiral brand "Goodyear™ Plicord Exstatic FDA Dry Material handling 150 psi."
COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure. Use Goodyear's Insta-Lock Cam Groove Fittings with this product. See page 221 for available Insta-Lock products. |
|
Goodyear offers a variety of Material Handling hoses suitable for abrasive, bulk transfer, cement and concrete applications. Visit our websites below for a complete list of the hoses available
Bulk Transfer - http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=24&search_app_ID=Go%21
Cement & Concrete - http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=25&search_app_ID=Go%21 |
|
| Goodyear offers a variety of Material Handling hoses suitable for abrasive, bulk transfer, cement and concrete applications. |
|
| Goodyear can offer a selection of hoses suitable for underground applications. Visit our website below for a complete list of the hoses available |
|
| Goodyear can offer a selection of hoses suitable for underground applications. Visit our website below for a complete list of the hoses available |
|
... see all the products in the category
Hoses
|
|
|
