|
|
Versilic®Tubing
60 shore Versilic® tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50°C and maintains its chemical, mechanical and electrical performance up to +200°C. It meets European Pharmacopoeia (3rd Edition) chemical tests requirements, USP XXIII Class VI biological tests and ISO 10993 biocompatibility (General toxicology-irritation & sensitization-cytotoxicity-homocompatibility). It meets FDA and BgVV positive lists as well as food grade tests according to EC directives. This silicon tubing is a non-invasive medical device tube. It may be used for blood contact with up to 29 days.
|
|
Watson-Marlow state-of-the-art Pumpsil platinum-cured silicone tubing with unique LaserTraceability
Watson-Marlow has invested in an on-site class-J clean room and computer-controlled extruders to produce the world's finest pharmaceutical-quality platinum-cured silicone tubing with:
- Size and lot code laser-etched on to the tubing surface
- Complete USP Class VI, FDA and NSF validation pack
- Ultra-pure non-leaching platinum cure
- Laser and ultrasonic tolerance control for precision performance
|
|
Suction and transport hoses, made of polyurethan (PU), polyolefin, (PO) and silicone, with non rusting spring steel wire
Applications:
Food industry
pharmaceutical industry
comestics industry
chemical industry
the raw materials comply with the legal foodstuffs directives:
EC-line 2002/72/EG
2004/19/EG
FDA-directives
21 CFR 177.1680
21 CFR 175.105
21 CFR 177.2600
Properties:
- taste and odourless
- extremely flexible
- small bend radius
- gas tight
- smooth inside
- optimum flow characteristics
- high tensile and burst strength
- free of platizisers and halogens
- generally good UV and ozone resistance
- good chemical resistance
- electrically conductive to BGR 132 by grounding spiral on both sides
Installation and connection possibilities:
Combiflex connecting system:
FDA-approved cast-on swivel, fixed and cone flanges as well as threaded sockets
Further installation and connection possibilities:
- hose clamps made of stainless steel, hose reducers, hose connectors, heat shrink cuffs
|
|
Moss continually extends and develops its range of products, with over 10,000 standard lines, all available from stock for same day despatch. The company's full range of products is represented in our latest catalogue which contains 15 sections covering:
Caps and plugs
Hydraulic protection
Protective netting and transit protection
Pipe protection and flange covers
High temperature masking
Security seals
Fasteners and fixings
Cable ties, cable management and accessories
PCB Supports and spacers
Feet and castors
Handles and knobs
Tube inserts, connectors and ferrules
Furniture accessories & point of sale
Latches, catches and hinges
Packaging, scoops and beakers
|
|
Watson-Marlow tubing is available in seven materials and over forty sizes, giving an extraordinary range of chemical and application capability. Watson-Marlow pumps are designed for Watson-Marlow tubing tolerances and performance, and no other tubing will provide comparable results.
Materials include; Marprene, Bioprene, PumpSil,
Sta-Pure, Chem-Sure, Silicone, PVC, Neoprene and Fluorel.
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
|
The silicone heating elements are characterised by highly uniform heat distribution. They are very flexible and avaible in many differents versions. As foils, mats or shaped components they are already in use as an economic solution in innumerable applications. They are always manufactured especially for the particular requirements.
|
|
To complement our line of high-performance etched-foil heaters, Minco offers silicone rubber blanket heaters with wire-wound heating elements. The wire construction costs less in larger heaters and can reduce capacitative leakage current to meet medical apparatus design standards.
Available in standard and custom sizes to 12" x 70" (305 x 1780 mm), the new heaters have UL and Canadian UL component recognition to 250 V (600 V pending). Power ratings for standard size heaters range from 2.5 to 15 watts per square inch at 120 or 240 V.
One significant market for these heaters is anti-condensation in electric motors and generators. Minco stocks more than 40 sizes of strip heaters, along with stator RTD's and bearing sensors, to meet all the temperature monitoring and control needs of motor OEM's and repair shops.
Applications requiring high wattage, fast response, and greatest flexibility will continue to use etched-foil Thermofoil™ heaters, also stocked in a wide variety of sizes and insulation types.
* Rugged
* Easy to install
* Uniform heating to 220°C (428°F)
* Lengths to 70" (1.8 m)
* Economical in large sizes
* Withstand repeated flexing
* Mount to flat or curved surfaces
* TÜV and UL component recognition marking are standard
* 2.5, 5, 10, 15 watts/in² at 120 or 240 VAC
* Lower leakage current due to capacitive coupling (may be important for large heaters used in medical applications)
|
|
|
Silicone heaters consist of two layers of silicone with an integrated fibreglass-mesh and heating wires laid out between the two layers. They are thermally and mechanically designed to withstand temperatures up to 200°C, without losing their shape. The silicone heater is vulcanized into a homogenous unit, ensuring the flexibility necessary to adapt to the mounting surface.
|
|
SILICON HEATING PANELS - for complicated shapes and sizes
Silicon Heating Panels provide external heating to surfaces of any complex shape and size. Being totally water resistant they can be used both indoors and outdoors. They are used for removing moisture, dehumidification of motors & control devices, for battery heating in high-altitude aircrafts, gas turbines, medical equipment & food equipment. They can also be used in petrochemicals, pharmaceuticals & chemical industries
Construction
Silicon Heating Panels comprises of resistance wire-wound heating elements embedded in thin, lightweight fiber glass cloth - Silicon rubber composite substrates, forming a very flexible and high strength heating panel. For convenience of installation, pressure-sensitive adhesive backing are provided on one side of the heating panel. For minimum heat losses these should be backed by thermal insulation pads.
|
|
Heat Transfer Compound Non Silicone PLUS
Ref: HTCP
Excellent thermal conductivity: 2.5 W/mk
Easy and economical to use
Silicone-free thermal pastes
Excellent non-creep characteristics
|
|
Loosens Frozen Metal Parts plus Silicone!
Kroil penetrating oil plus silicone for faster penetration,
lubrication, water displacement, and rust prevention.
|
|
| ... products without technical information |
| |
|
Glass fibre braided sleeving coated with silicone rubber
|
|
The SILCO-MIX range of systems are compact, pneumatic or hydraulically driven piston pump metering and mixing systems.
They are used to continuously apply medium to high viscosity multiple component silicones with a fixed mixing ratio of 100:100.
The material can be abrasive as well as filled.
The material is supplied by feed pumps from original drums.
|
|
Material : SILICONE / EPDM
Colour : Natural / Black - Colour on request
Dimensions : mm
The silicone caps are ideal when temperature resistance is required (316°C)
The EPDM caps are ideal when lower temperature resistance is required (246°C)
|
|
| ... products without technical information |
| |
|
|
