|
|
Tygon® Antimicrobial tubing
Growth of microbes on many materials can lead to foul odors,discoloration and formation of mildew and biofilm. In the case of tubing, microbes can contaminate the material being transferred as well as degrade the tubing itself.
Formulated with a silver based compound on the inner surface at the point of fluid contact Antimicrobial Tygon® is effective against a broad spectrum of microorganisms.
Antimicrobial Tygon® outer surface can also be treated in case bacterias buildup on the O.D. is a concern. Cleaning procedures, such as washing with detergent and hot water can kill microbes. But this process can be time consuming and costly, and does not provide residual protection against fresh contamination. The best way to provide protection against contamination is to use safe and durable Antimicrobial Tygon®.
|
|
High-pressure vulcanised polyethylene tubing - approved for contact with food products. Special material formula withstands even highly aggressive cleaning agents. The black variant is UV stabilised as well.
Variants and functions:
- Highly resistant to chemicals
- Approved for use in food processing
- Outstanding UV stability (black variants)
- Free of paint-wetting impairment substances
- Highly resistant to hydrolysis
- Temperature resistant from - 35 to + 80°C
|
|
Highly flexible during use, unsurpassed elasticity and unbeatable return force. The new, dimensionally stable PUN-S from Festo.
• Harmonised with all fittings and couplings thanks to internal and external calibration
• Also available in the form of preassembled variants
• Suitable for compressed air and vacuum
• Wide choice of tubing lengths and diameters
|
|
This product is not suitable for CN and PK push-in fittings.
Polyurethane tubing is highly resistant to abrasion, pressure and wear, offers outstanding resistance to kinks, excellent tensile and tear propagation strength, very good cushioning capacity and temperature flexibility. It is also highly resistant to oil, grease, oxygen and ozone. Deformation is kept to a minimum even under long-term stress. Each of the different polyurethane types has different specific characteristics.
- Outside diameter per CETOP RP 54 P
- FDA food industry approval
- German Technical Control Board (TÜV) tested
- Halogen-free
- Hydrolysis resistant
- Microbe resistant
- Suitable connectors: QS, QS-F, CRQS, CK, CN
- Media: Compressed air and vacuum, Water (except potable water)
|
|
Plastic Tubing
(pictured) Multi-Color Ribbon Tubing
Multi-Color Ribbon Tubing commonly known as MCR, is a cost effective method of routing two of more tubing lines. Made from 95 durometer Polyurethane, MCR can be installed faster than other jacketing options. MCR color codes tubing for indentification, tracing, or troubleshooting. MCR with withstand the rigors of flexing, yet be easily separated for routing.
Other types of Plastic Tubing that Coilhose Pneumatic offers:
Polyurethane Tubing
Nylon Tubing
Polyurethane Tubing
Polyvinyl (PVC) Tubing
Spark-Lin Weld Spatter Resistant Tubing
D.O.T. Air Brake Tubing
Tubing Cutter
Hose Cutter
Tube Channels
|
|
The Verderflex product group consists of a well-balanced high quality range of peristaltric tube pumps (Verderflex-Smart series), industrial hose pumps (Verderflex
VF series) and dosing units (Verderflex Genie).
As with all series of Verder pumps, current emphasis is on reduced downtime with minimal maintenance, easy operation and continuous quality improvement. All products are also covered by a two-year warranty on the pumps.
|
|
Tubing and hoses
The tubing is as important as the pump because:
Its restitution creates suction lift
Its strength resists pressure
Its flex resistance determines pumping life
Its bore decides the flow rate
Its wall thickness controls pumping efficiency.
Ordinary tubing is not designed for peristaltic pumping, and only Watson-Marlow precision pump tubing will give the best results in a peristaltic pump. The results of using any other tubing are unpredictable, and may jeopardise your process.
Hoses for high pressure hosepumps
Watson-Marlow Bredel's innovative hose design and unique ground construction has created the benchmark in hose performance and life. The unique design ensures that compression forces are evenly applied, and the enormous restitutional ability of the hose creates powerful suction handling and accurate metering capabilities.
|
|
Watson-Marlow tubing is available in seven materials and over forty sizes, giving an extraordinary range of chemical and application capability. Watson-Marlow pumps are designed for Watson-Marlow tubing tolerances and performance, and no other tubing will provide comparable results.
Materials include; Marprene, Bioprene, PumpSil,
Sta-Pure, Chem-Sure, Silicone, PVC, Neoprene and Fluorel.
|
|
Versilic®Tubing
60 shore Versilic® tubing is biologically inert and does not inhibit cell culture. It stays flexible down to -50°C and maintains its chemical, mechanical and electrical performance up to +200°C. It meets European Pharmacopoeia (3rd Edition) chemical tests requirements, USP XXIII Class VI biological tests and ISO 10993 biocompatibility (General toxicology-irritation & sensitization-cytotoxicity-homocompatibility). It meets FDA and BgVV positive lists as well as food grade tests according to EC directives. This silicon tubing is a non-invasive medical device tube. It may be used for blood contact with up to 29 days.
|
|
Watson-Marlow state-of-the-art Pumpsil platinum-cured silicone tubing with unique LaserTraceability
Watson-Marlow has invested in an on-site class-J clean room and computer-controlled extruders to produce the world's finest pharmaceutical-quality platinum-cured silicone tubing with:
- Size and lot code laser-etched on to the tubing surface
- Complete USP Class VI, FDA and NSF validation pack
- Ultra-pure non-leaching platinum cure
- Laser and ultrasonic tolerance control for precision performance
|
|
Type PFAN temperature and chemical resistant tubing. The high-end tubing which stands up to practically all ambient influences.
Variants and functions:
- Highly resistant to chemicals (even extremely pure acids)
- Temperature resistance: 20 to +150° C (unpressurised from 70 to 260° C)
- FDA approval §177.1550 for use in food processing, approved for contact with food products
- Excellent UV stability
- Flame retardant per UL 94 V0
- Colourless
- Free of paint wetting impairment substances
- No tendency to develop tears in the longitudinal direction (as opposed to Teflon)
|
|
Tygoprene® Tubing
Alternative to silicones and PVC when longer pump tubing life on peristaltic pump is required Tygoprene® XL-60 offers an outstanding flexibility, a resistance to ozone, oxygen and ageing.
Translucent to ease visual inspection, it offers also excellent chemical resistance to a wide range of fluids, including acids and bases. As Tygoprene® has low extractables, it is an ideal choice for dosing and transfer ink, detergents and food products.
In house testing also indicates a UL 94-HB flammability rating.
|
|
Tygon® 2075 ultra chemical tubing
Tygon® Ultra Chemical Resistant Tubing offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® 2075 is virtually unaffected by acids, bases, ketones, salts and alcohols, fitting the requirements of many applications from battery acid filling to hazardous material handling. It's entirely plasticizer-free, eliminating fluid contamination and the premature embrittlement and cracking common with many flexible tubings. Its exceptionally smooth inner surface inhibits particulate buildup and reduces the potential for
contamination.
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoses
|
TYCHEM® F boot covers with slip retardant sole,
Model POBA
*Slip retardant sole
*elasticated ankles on top
*with additional ties
*Length 48 cm
Height 42 cm
*Single size
|
|
TYVEK® boot covers, Model POBO
Model Description:
TYVEK® boot covers, Model POBO
* Elastic on top
* Additional ties
* Length: 42 cm
* Height: 48 cm
* Sizes: single size
|
|
Model Description:
TYVEK® shoe covers, Model POSo
* elasticated ankles
* Length: 40 cm
* Sizes: single size
|
|
Model Description:
TYVEK® shoe covers with slip retardant sole, Model POSA
* Elasticated ankles
* Sizes: 36-42, 42-46
|
|
*With its overtaped seams this suit is ideal for toxic dry
particulate environment or where liquid penetration
through seams should be avoided.
*Only type 4B nonwoven suit, take full advantage of Tyvek® unique inherent barrier protection as seams are tight
*Best solution for mask wearers, best fit with respirators.
*Protection against radioactive contamination according to EN 1073-2.
*Electrostatic protection according to EN 1149-1.
*CAT. III
*Type 4B, 5, 6
*White
*S-XXXL
|
|
HyFlex® ESD
Outstanding comfort and product protection from ESD
General purpose knitted and dipped glove
Ansell Healthcare introduces a new range within the popular HyFlex® family: HyFlex® 11-120/122/125. It is especially designed for micro-electronic work where electro-static discharge (ESD) must be avoided. The thin design improves the handling of ever smaller components. Moreover, nitrile foam ensures that the gloves are guaranteed free of dimethyl formamide (DMF).
|
|
Salisbury's Rubber Insulating Sleeves extend protective coverage from the rubber glove's cuff to the shoulder.
Meet ASTM D1051 and IEC/EN 60984
Offered in two different manufacturing processes:
- Dipped
- Salisbury Exclusive -- Molded
Dipped Sleeves are available in three styles:
- Extra-Curved
- Curved
- Straight
- Offered in single or two color combinations
Molded sleeves are available in either Type I or Type II Salcor synthetic rubber
- Available in three solid colors:
- Safety Orange
- Yellow
- Black
Available in regular, large and extra large ASTM sizes.
|
|
| ... products without technical information |
| |
Aluminium Oval Tube 30x15x1mm
Aluminum Tube ideal as wardrobe rail in length up to 5000mm.
Colour: silver-matt
|
|
Top Line Electropolished tubing sets the standard for service in applications requiring finishes to 15RA maximum. Available in sizes from 1/2" to 4" OD, this full finished stainless steel tubing is available from stock or direct from the mill in 20 foot lengths. All electropolished tubing is fully tested and marked per ASTM A450 requirements. 3
All Top line electropolished tubing is packaged using protective 6 mil poly sleeving with air tight end caps. The tubing is then packageg in wood or Tri-Wall corrugated cartons for maximum protection during shipment.
Finish: Electropolished Tubing is standard with a 15RA max ID with bright annealed/mill OD (ASME BPE surface finish code SFT4). Mechanically polished OD to 32RA or 20RA available on application. The same product is available with a 10RA max. surface finish ID.
Annealing: All tubing is Bright Annealed to a minimum of 1900 degrees F (1040° C) and rapidly quenched.
Cleaning: All Top Line electropolished tubing is rinsed with low TOC de-ionized water. The tubing is then dry purged with 99.998% pure Nitrogen which is filtered to .003 micron at the point of use. The cleaning and packaging is done in a class 100< cleanroom.
|
|
To carry out any geometry of pneumatic network, final or temporary Atlas Copco proposes Airnet piping to you: 6 diameters of aluminum tubes and a panoply supplements connections and accessories.
Insensitive with corrosion, the Airnet system preserves the quality of the air up to the point of use and offers a major asset in the control of escapes and the pressure losses énergivores. Very smooth, the internal surface of the tubes supports the flow of the fluid, minimizing of as much the energy request. The Airnet modules are guaranteed 10 years and in conformity with the directive the DEVELOPING COUNTRIES 97/23/EC. Their blue coating of standardized color makes them easily identifiable.
Diameters: from 20 to 80 mm (3/4 inch with 3 inches)
Temperatures: of -20 C with +70°C
Maximum operating pressure: 13 bars
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
