|
|
Colors for your data
Industrial Operator Panel (HMI) with 7.5" touchscreen color TFT display
64K colors TFT display
VGA (640x480 pixels) resolution
Resistive touchscreen
Connection to industrial bus systems and Ethernet (requires plug-in modules)
32 MB internal Flash memory
32 MB on removable media (option)
SSFDC memory card
IP65 front panel protection
Programmable with "Designer" software tool (option)
|
|
Beijer Electronics H-series H-T60b, touchscreen panels with mono/color STN LCD 5.7” display
Display: Mono STN LCD
Presentation form: 5.7” (diagonal), 320 x 240 pxl
Keypad: 1 Meny key and 5 user-defined function keys
The H-series offers valuable HMI functionality at an affordable level. The series include keypad and touch screen interfaces and is available in seven different sizes from 3 to 10.4 inches. Offering three levels of functionality – Standard, Plus and Network – the H-series enables you to select and pay for what level of HMI technology you need. |
|
NEW RED LION G306A OPERATOR INTERFACE PANEL FEATURES ADVANCED TFT DISPLAY FOR CRISP IMAGES, EXCELLENT READABILITY
The 5.7" 256 color QVGA 320x240 pixel LCD display also offers three front-panel LED indicators, and a five-button keypad for on-screen menus. In addition, as with all G3 panels, the G306A arrives standard with an Ethernet port, USB programming port, support for up to five high-speed serial ports, integrated protocol converter, built-in web server, standard CompactFlash socket and IT-ready data logging.
The G306A is both robust and simple to operate. Users can easily enter data on the G306A through the resistive analog touchscreen or front panel keypad. Plus, this model comes with an increased onboard flash memory of 8 MB, and it can be configured using Red Lion’s free Crimson Programming Software. With these exceptional features, the G306A is ideal for collecting and displaying data or interfacing with a variety of devices, including PLCs, PCs, drives, PID controllers and others, all while offering exceptional visual properties.
The Red Lion G3 series offers the most powerful communications platform available today, providing a cost-effective solution for protocol conversion, remote system control and monitoring, as well as historical data logging. By utilizing innovative technology to display sharp, high-quality images and easy-to-read data, the G306A delivers a superior HMI solution.
- Configured using Crimson 2.0 Software (FREE)
- Up to 5 RS-232/422/485 Serial ports
- 10 Base T/100 Base-TX Ethernet Port
- Remote Web Access and Control Facility
- UL Listed for use in Hazardous Locations
- IP66 |
|
Operator Interfaces - Human Machine Interfaces
FEATURES:
Many PLCs supported
Friendly multiple languages supported to the end users
Temperature controllers & inverters directly connected to HMI via Modbus
Data logging, bargraphs, trends and alarms
Animation: display/hide, flash, color changed
Data entry and data displayfrom/to PLC registers directly
Free configuration software, configuration for all HMIs from PC software
Upto 65535 screens in each project, pop-up screen and associated screen supported
Ladder programming (Soft PLC) supported in HMI and Ladder online monitoring
Screen security
Floating point suppored
Ready made registers for Real Time Clock
Unique Tag database for HMI and PLC registers
256 real time alarms, and 30 or 2000 historical alarms
Global tasks, power-on tasks, list of predefined tasks and screen tasks-before, while and after
Ready made objects for lamps, botton , data entry, data display, trend, alarm, bitmaps, meters
Action for graphical objects from list of predefined tasks
Ready-made system coils for changing RTC data by sec., min., hour, day, month, year |
|
Beijer Electronics EXTER T40/T40m, touchscreen panels with 3.5” display
Display: Graphic 64K color TFT/Graphic 16 grayscales
Presentation form: 3.5”, 320 x 240 pxl
USB Host
Front protection class: IP66 (waterproof even when exposed to high pressure washing).
With EXTER™, you get an operator panel that is ready to impress you. Its high-performance Intel Xscale® processor, robust construction and multiple communication ports make it a futureproof choice for your machines and processes. There are fourteen models to choose from - seven with touchscreen display, six with keypad control and one mobile operator panel. The award-winning, slim design and the powerful performance make EXTER™ an operator panel beyond the ordinary.
|
|
Beijer Electronics H-series H-T50b, touchscreen panel with mono STN LCD 4.7” display
Display: Mono STN LCD, 16 shades of blue
Presentation form: 4.7”(diagonal), 240 x 128 pxl
The H-series offers valuable HMI functionality at an affordable level. The series include keypad and touch screen interfaces and is available in seven different sizes from 3 to 10.4 inches. Offering three levels of functionality – Standard, Plus and Network – the H-series enables you to select and pay for what level of HMI technology you need. |
|
- B/W or colour displays
- programmable and equipped with interface communication
- PMU and XGT series |
|
Hardware
VGA 640x480 pixels, lighted, TFT colour graphics LCD display 10.4". (An enhanced TFT display is available as an option).
Resistive touch screen.
Optional PS/2 keyboard / keypad interface.
Ethernet options available. Supports TCP/IP, ModbusTM and other protocols.
4 Mbytes of flash memory and 16 Mbytes RAM.
EIA-232, -422 or -485 serial interface. Additional serial ports available.
RISC 92 MHz MIPS R3000 processor.
The terminal is industrially hardened to operate in rugged environments and meets NEMA-4 specifications for washing, ice and salt spray.
Modular form factor also available.
Software/Firmware·
QlarityTM - Object-based programming language makes application design easy for non-programmers whilst also having the capability of highly complex applications.
Design with pre-defined objects, edit current objects or design new objects for your application
Windows® programming environment - Qlarity Foundry is available for free.
Support for select partner hardware (distributed/remote I/O, motion control).
Keys around the display can be customised and your logo can be added to the legend. Custom hardware, firmware and software options are also available.
Contact us for a free trial demonstration terminal.
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.a |
|
Touch Screen Terminals bring ease-of-use and flexibility to the user. The touchscreen is as rugged as the keys on the keypad models. The Touch Screen Terminals on these pages represent a high value solution for many applications.
High Performance Touch Screen Terminals combine the ease-of-use of ESA's standard touchscreens, plus advanced functions to satisfy the requirements of any application.
Sophisticated graphic objects like potentiometers, sliders, dials and high resolution graphic displays are available. Multiple processors, one for the display and one for communications allow high-speed operation. |
|
WOP-iT Web Operating Panel
HMI Panel with additional programmable logic.
From 3,5" to 19" one programming software for all panels: WOP-iT Designer. |
|
Customised touch screen systems
Individual touch screen systems
Can be combined with other technologies (e.g. with membrane keyboards)
Customised electronic circuitry
|
|
Visualization or visualization & control on a multifunctional platform
- Web, graphics and control panel
- Open platform allowing you to integrate your own software
- Based on Windows CE 4.2 (5.0)
- 4 digital I/Os on-board
- Control functionality
- Optional diagnostics and telecontrol (TSDiag+) |
|
The Motion Coordinator supports two open standards to allow connection to a broad range of third party operator interfaces. (HMIs)
The Modbus RTU protocol provides single point to point communication between the Motion Coordinator and a programmable keypad/display or touch-screen HMI. Implementation of the Modbus slave protocol is provided on serial port 1 for RS232 and port 2 for RS485. Baud rate and slave address can be set in the Trio BASIC program during serial port initialisation.
If the Ethernet daughter board P296 is fitted, then Modbus TCP can be selected to communicate with a suitable Ethernet equipped HMI.
Operator interfaces based on the Windows operating system can use the TrioPC Windows ActiveX component to allow either synchronous or asynchronous connection to the Motion Coordinator over USB or an Ethernet TCP link. One HMI can control multiple Motion coordinators over a local Ethernet network. In addition to the functionality provided, it is possible for a user to implement many other serial protocols using the simple but powerful input functions in Trio BASIC. Serial bytes can be handled either as ASCII characters or as binary data and protocols written include Siemens S39/64 and ANSI. Third party operator interfaces that have been interfaced to a Motion Coordinator using the Modbus protocol include: Automation Direct, Eason Technology, ESA, Exor R&D, Horner, Maple Systems, Pro-face and Total Control. |
|
Operator panels of series AS-Pxx:
The devices allow for simple operation, diagnosis and monitoring of your machines and systems. You can design the user interface according to your requirements.
An intuitive operator prompting via touch screen, assigned function
keys or a combination of both are possible. The use of insertable strips allows for individually labelling the keys.
Operator panels of series V606:
The convenient and cost-efficient operator panels for all systems,
which can be connected via modbus, are particularly suited for simple visualization tasks. In combination with our controllers, it provides you with a complete automation solution. |
|
| The Nematron PowerView touch screen HMI delivers a cost effective ease-of-use solution in one flexible system. Use PowerView to maximise the combined performance of general Control System or PLC Workstation applications, Data Capture, Monitoring systems or wherever a local operator interface is required to display machine or process information graphically. |
|
Beijer Electronics EXTER T70, touchscreen panel with TFT-LCD 6.5” color display
Display: Graphic 64K color TFT-LCD, resistive touch
Presentation form: 6.5”, 640 x 480 pxl
USB Host, USB Device and built in CF-card slot
Front protection class: IP66 (waterproof even when exposed to high pressure washing).
With EXTER™, you get an operator panel that is ready to impress you. Its high-performance Intel Xscale® processor, robust construction and multiple communication ports make it a futureproof choice for your machines and processes. There are fourteen models to choose from - seven with touchscreen display, six with keypad control and one mobile operator panel. The award-winning, slim design and the powerful performance make EXTER™ an operator panel beyond the ordinary. |
|
Product GK473 Gateway
Technical data - electrical ratings
Current consumption 10 years (flash / EEPROM)
Display 4 LED´s as operating status indicators
Emitted interference DIN EN 61000-6-4
Interface to SPA EIA RS485 (ASCII protocol)
Interfaces CANopen
DeviceNet
Profibus-DPV0
Interference immunity DIN EN 61000-6-2
LED operating status DP (green) fieldbus operating status
DP (red) operating and error status
RX / TX (yellow) receiving / transmitting a token (RS485)
Programmable parameters Auto-Check functions
Auto Scan SPA
Auto Message SPA Position
Auto Message SPA Error
Supply voltage range 12...24 VDC
Other products available: |
|
| "True Vision, Innova 40i" the best DRO in the world. It is easy to operate and absolutely reliable; it represents a new technological breakthrough in measuring and control systems for the machine tool.With its exclusive color TFT screen, it is possible to simulate the programmed part in 3D, with an unmatched view from any angle; a considerable advance from the monochrome LCD screens on the market today. |
|
The ACU RITE 200 series with LCD screen technology offers the possibility of realizing with equipment different application situations.
Change over by software simply to trick, or milling and drilling mode.
The crystal-clear LCD monitor in connection with situation-dependant graphic user support makes a working with the ACU RITE 200-Serie particularly simple.
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
Beijer Electronics EXTER™ K100, keypad panel with TFT-LCD 10.4" color display
Display: Graphic 64K color TFT-LCD, resistive touch
Presentation form: 10.4", 800 x 600 pxl
Function keys: 22 (10 with integrated LED and text strip)
USB Host, USB Device
Front protection class: IP66 (waterproof even when exposed to high pressure washing).
With EXTER™, you get an operator panel that is ready to impress you. Its high-performance Intel Xscale® processor, robust construction and multiple communication ports make it a futureproof choice for your machines and processes. There are fourteen models to choose from - seven with touchscreen display, six with keypad control and one mobile operator panel. The award-winning, slim design and the powerful performance make EXTER™ an operator panel beyond the ordinary. |
|
Beijer Electronics H-series H-T70t, touchscreen panel with TFT-color 7" colour widescreen display
Display: Graphic 64K color TFT-LCD, resistive touch
Presentation form: 7" (diagonal), 800 x 480 pxl
Keypad: 1 Meny key and 6 user-defined function keys
2 USB Hosts, 1 USB Device and a built in CF-card slot
The H-series offers valuable HMI functionality at an affordable level. The series include keypad and touch screen interfaces and is available in seven different sizes from 3 to 10.4 inches. Offering three levels of functionality – Standard, Plus and Network – the H-series enables you to select and pay for what level of HMI technology you need. |
|
Operator panel (HMI interface with PLC and CNC)
All products of the Power family can be supplied with a touch screen panel separated from the box controller. Its 10” display is managed directly by the graphic board on the controller through LVDS interface suitable for cables maximum 10 metres long |
|
unipo® control panel UCP 5
The individually configurable small control panel
UCP5 is the most variable visualisation solution for text- and graphic-displays in industrial applications, for diagnostic and analyser purposes as well as within building automation.
Its modular construct, the intuitively operated projecting software UCPTool® and the industrial quality (IP65 protected) make UCP5 the first choice for new projects and for replacement. UCP5 substitutes a large assortment of plaintext displays and so grants the continuous availability of your plants!
|
|
| The OM1500 Operator Terminal is a low cost/high performance man/machine interface with a broad range of operator input and display capabilities. The terminal includes a 2 line by 20 character LCD display, a full numeric keypad, five function keys and three LED light bar indicator lights. The OM1500 Operator Terminal is part of Optimation's OptiMate® series. Each OptiMate® module is designed to connect to a microprocessor or most PLC's with a single cable connection. OptiMate® modules can be used individually, or together with any combination of other OptiMate® modules. |
|
Hardware
QVGA 320x240 pixels, lighted, STN colour graphics LCD display measuring 145 mm (5.7") diagonal, (TFT, enhanced TFT and greyscale displays are optional).
Module with display, CPU board, touch screen and mounting bracket is available for integration into your panel.
Resistive analogue touch screen. Options include PS/2 keyboard / keypad interface
EIA-232, -422 or -485 serial interface. Second EIA-232,-422 or -485 port available.
Ethernet 10/100Base-T Power-over-Ethernet.
TCP/IP, Modbus™ and other protocols. 4 Mbytes of flash and 16 Mbytes RAM. 200 MHz Intel® XScale™ core platform. Speaker and real-time clock.
NEMA4 sealing.
HMI Software
QlarityTM - Object-based programming language makes application design easy for all user levels. Design with pre-defined objects, edit current objects or design new objects for your application. Qlarity Foundry - Windows® programming environment for screen design and integration. Qlarity Foundry is available free of charge.
|
|
|
|