|
|
Temperature Control with the data logger "Penguin"
- available in two variations
for temperature (16.000 measuring values)
for temperature and humidity (32.000 measuring values)
- Measuring range temperature: -40°C to 80°C
- Measuing range humidity: 0 to 100% RH
- High accuracy
- Infrared Interface
- Easy Programming
- Various programming possibilities
Just have alook at our Online-Shop:
www.temperature-shop.eu
Here you will also find information about our further data loggers and product range all around the temperature measurement:
- Temperature Sensors
- Temperature Humidity Sensors
- Thermocouple Connectors
- Temperature Measurement Instruments
- Digital-Thermometer
- Infrared Thermometer
- Data logger
- Recorders
- stationary Pyrometers
- Controllers
- Indicators
- Transmitters |
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user. |
|
With or without display, compatible with extreme temperatures (very high and very low), the new range of KISTOCK dataloggers lets you monitor (continuously or on-demand) your manufacturing process, storage premises, transport chain...
With these new accurate and self-contained dataloggers, you can store from 16,000 to 100,000 measurement points (temperature, humidity, light, current and voltage); they are compatible with external probes (up to 4):
- humidity-temperature (thermocouple K-J-T, Pt100),
- ammeter clamps,
- 4-20mA and 0-10V
When connected to the USB port of your PC and when configured in ONLINE mode, the KISTOCK becomes an acquisition system, allowing you to measure 5 parameters simultaneously, in real-time.
KILOG work on batteries, which can be replaced when required. You can configure the working mode, display mode, LED status, recording duration…
One click and you can quickly download data (1000 points per second) from your KISTOCK (or from the Data Recorder). Once the data have been automatically saved, you can process data with clear and accurate tables and graphs |
|
ShockWatch temperature recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device monitors and records temperature and humidity through a linear dual channel. Its small size and built-in sensors allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
Can also be used without the radio function
-Evaluation of communication either via radio or by means
of a logger at the PC
-Usable range of the radio connection: max. 350 m in the
open air, and max. 75 m indoors
-Data transmission of up to 200 loggers simultaneously onto
the screen
-All data is automatically stored on the PC in an Excel file
-Alternatively, stored data can be transmitted
conventionally directly at the PC via a logger interface or
IrDA (infra-red)
-All loggers have a 3-digit LCD display for the currently
measured values
-Up to 16,000 measured values can be stored in the logger
-Sampling rate: between every 10 seconds and every 2 hours
(variable)
-Storage capacity between 40 days and 3 years
-Internal temperature and moisture sensor
-Variable hi/low limit alarm (with visual warning)
-Min/max value indication according to hours or days
-Each logger has its own ID number
-Radio module with acoustic and LED alarm and hi/low alarm
contact 30V/2A
-The external sensor can also be connected directly to the
radio module
-Replaceable battery (battery life approx. 2 years) |
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 ºC (-31 to +176 ºF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP. |
|
Precise measurement and control of Humidity (%RH) and Temperature is essential in the pharma, food, chemical and other industries. The models featured here suits various applications of simultaneous measurement and control of %RH and Temperature. Indicators are available for simultaneous display of temperature and %RH on 0.5%u201D to 4%u201D large displays. PID controls are available for maintaining %RH and Temperature in the stability chambers, Walk in chambers, dryers etc%u2026 Eight and Sixteen channel Data loggers with suitable sensors and transmitters are available for validation of chambers, storage rooms etc%u2026 Small models are also available for monitoring of %RH and Temp. in server rooms, clean room storage, hot air driers etc%u2026 All models are available with serial interface for communicating with computer. 21 CFR part 11 compliant software is also provided as per FDA regulations.
APPLICATIONS
For BOD, Environmental/ Walk-in test chamber, HVAC applications and for validation purpose
|
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs |
|
Protimeter HygroTrac
The Protimeter HygroTrac is a simple and cost-effective system for remote environmental monitoring in buildings. Data can be viewed live over the internet showing parameters such as moisture content relative humidity and temperature.
Set threshold alarms
Receive alarm warning via email and text message
Comprehensive site reports
Reduce costly site visits
Wireless Sensors
Transmit data at user-selected intervals to data acquisition gateway.
%RH
Temperature
Moisture content in materials
Data Acquisition Gateway
Data collection point receives and stores data from all wireless measurement sensors. Information is then sent to a secure web server. Data can also be stored directly on the gateway if an internet connection is not available.
Applications:
Permanent installation into a wide range of building environments where moisture and subsequent mold growth is a concern.
Monitor storage facilities where moisture sensitive products are held such as paper and timbe |
|
| ... products without technical information |
| |
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
WaveBook/516E
Ethernet-Based Portable High-Speed Waveform Acquisition
WaveBook/516E digitizer offers multi-channel waveform acquisition and analysis for portable or laboratory applications; includes 8 built-in channels expandable up to 72 channels of voltage, accelerometer, microphone, strain gage, thermocouple, position encoder, frequency, high voltage, and other signal types.
Key Highlights
• 16-bit/1-MHz A/D
• 1 µs/channel scanning of any combination of channels
• Single and multichannel analog triggering with programmable level and slope
• Digital TTL-level and pattern triggering
• Pulse trigger and external clock
• Programmable pre- and post-trigger sampling rates
• Sixteen digital inputs can be scanned synchronously with analog signals
• Operable from AC line, a 10 to 30 VDC source, such as a car battery, or optional compact rechargeable battery module
• Expandable up to 288 high-speed channels
• SYNC connection allows multiple units to sample synchronously
• Add up to 854 lower-speed thermocouple channels
• DSP-based design provides real-time digital calibration on all channels |
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest. |
|
Data Logging Real Time Analyser
Description:
Model 30 Sound Level Meter & Real Time Analyser with 1:1 Octave Band Filters
The Model 30 (Class 1) and Model 30-2 (Class 2) are high performance, yet user friendly, integrating Sound Level Meters and Real Time Frequency Analysers.
Both models meet or exceed the latest standards for compliance with worldwide regulations and guidelines, making them ideal for most applications.
Taking measurements is as simple as pressing the 'record' and then 'stop' buttons. The wide single dynamic span of over 110dB ensures that you never make invalid measurements that 'Overload' or 'Under range'.
The Model 30 instruments simultaneously measures parameters with all Frequency and Time Weightings, this gives users the confidence to know they will always have the correct data for subsequent analysis.
Real Time Analysis allows users to measure all 10 individual 1:1 Octave Bands at the same time. This is very practical for reliable, accurate and rapid capture of variable noise levels to optimise the accurate prescription of hearing protection in industrial environments.
The Model 30 series can also be supplies as a Noise Measurement Kit containing all that is required to carry out a noise survey, including a Model 30 Sound Level Meter, Acoustic Calibrator, Windshield, Hard Attache Carrying Case, Wrist Strap, Carrying Pouch, Software, Calibration Certificates, Download Cable & Batteries.
|
|
Quest Technologies offers a complete line of datalogging sound level meters and real time analyzers. The SoundPro® SE/DL Series includes Advanced Hand Held Sound Level Meters and Real-Time Frequency Analyzers. When used with QuestSuite® Professional II applications software, you can simply and reliably perform your advanced noise analyses.
|
|
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, B+K Precision's Sound Level Meters can get the job done. The model 735 Sound Level Meter provides 30~130 dB capability in three convenient measurement ranges Low, Med and Hi with an accuracy of ±1.5 dB. The meter meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting. Two auxiliary ports provide either AC output, 1Vrms full scale, or DC output, 10mV /dB. With the model 735, B&K Precision can meet all your sound testing needs.
# Windows Software Included
# Clock Display
# 32,000 Records Data Logger
# RS-232 Interface
# Bargraph
# MAX/MIN function
# Auto Ranging (30 ~ 130dB)
# Resolution 0.1dB
# Level Range Display
# AC/DC Signal Output
# Auto Power Off
# Backlit LCD |
|
The CR:800B is a range of high performance Integrating Averaging Sound Level Meters that provide the functions and features demanded by modern measurement standards & guidelines.
The CR:800B is an Integrating Sound Level Meter with all of the measurements required by the Noise at Work Regulations, as well as for general noise assessments and surveys. The CR:800B can also be used with an outdoor measurement kit for Environmental noise measurements.
In addition to the Broadband measurement provided by the basic instrument, the CR:800B can be upgraded to incorporate 1:1 and 1:3 Octave Band filters, allowing the CR:800B to be used in a wider range of noise measurement and control applications. T
> Ideal for Noise at Work Assessments, Noise Control & Environmental Measurements
> Integrating Averaging Sound Level Meter, with Leq, LEPd (LEX8h), Sound Level, Lmax, Lmin, LCPeak, Ln's and Frequency Analysis
> Optional 1:1 and 1:3 Octave Band Filters
> IEC 61672-1:2003 Class 1 or Class 2 Group X
> Data Logging of Measured Parameters
> Up to 1,300 measurements and 8 days of Time History
> Large Graphical Display
> Advanced configuration options from the Deaf Defier3 software
> Updated Deaf Defier3 Windows software
> Outdoor measurement kits available |
|
| ... products without technical information |
| |
|
|
see the results for the following category
