|
|
The Vaisala HMT360 Series for Moisture in Natural Gas incorporates Vaisala's proven HUMICAP® sensor technology.
With three probe designs to choose from, the HMT360 Series is flexible enough to suit your installation requirements. Compatible with most existing sampling systems, it is easy to replace old or malfunctioning devices. Designed for high pressure systems, these probes can be installed directly into pipelines, eliminating the need for complex and expensive sample systems. With its ball valve set, the probe can be inserted and removed in low pressure systems. The transmitter is easily configured, and delivered with a one week lead time.
The HUMICAP® sensors are not damaged by glycol, and can tolerate saturated conditions and contact with water without causing measurement drift. The sensors dry down rapidly after exposure to water in the process or ambient conditions. The HMT360 Series is rated intrinsically safe for Class I Division I environments.
The stable HMT360 Series has a one year recommended calibration interval, thus saving maintenance costs and measurement downtime. Probes can be changed in the field in just a couple of minutes!
|
|
|
In many high purity gas applications, such as the semiconductor industry, the residual moisture content of the gas is critical to satisfactory operation of a process. Historically trace moisture measurement has been a difficult exercise, demanding the use of complex moisture analysers or expensive analytical techniques. Now Michell has brought to market a simple, economical and very effective solution for on-line measurement of dew-point temperatures down to -120 °C (equivalent to less than 1 part per billion). The PURA transmitter benefits from Michell's experience and expertise in the production and calibration of impedance dew-point sensors. Incorporation of industry standard materials and manufacturing processes gives the first low cost transmitter suitable for large-scale integration into a semiconductor fabrication plant or high purity gas line.
|
|
TD-200
Our process blowers operate continuously for 24 hours a day,
365 days a year. The stability and reliability are recognized by
a large number of leading companies.
Casting Multi-Stage Centrifugal Blower
Casting Single-Stage Centrifugal Blower
Clean Room Fan
Conveyor Blower
Corrosion Resistance Blower (Hastelloy)
Cutter and Trim Blower
Gas-Tight Booster (1~15kg/cm2G, depend on system required.)
Gas-Tight Blower
High Temperature Resistance Blower 850℃
Spark Resistance Blower
Wear Resistance Blower
|
|
|
Housing compression-proof for PN 2,5/PN 6. Cylinder with noise reducing chamber on the discharge side, housing with connections for injection- and water flushing, as well as for lubrication - and purge oil supply systems. Conveying chamber by single-acting oil-purged mechanical seals in combination with labyrinth seals sealed on the shaft. Direction of flow horizontal/vertical (depending on size). Drive directly via coupling or flexible spur gear (depending on size).
|
|
... see all the products in the category
Blowers
|
Systema spa has got a Division for the production of gas ovens for heating, drying and dehumidification using its own exclusive technology with the gas burner BAF used with special heat exchangers in special steel: this Division is called Comex Group.
This new range of ovens offers great advantages because they can be designed on measure and on specific request of the client.
Ovens have been produced for the sectors of foundry, varnishing, food industry, wine production, dairy farming .
Our handling and varnishing systems with automatic control of the density, drying and handling of the materials have the advantage to guarantee a high quality and continuous cycle of the production.
With this new technology of ovens with gas heat exchangers there is also the advantage of a prompt investment return, because the thermal KW produced by the gas is economically more convient than the electric thermal KW, and with less problems of energy supply.
In fact, the natural gas or LPG is everywhere in quantity at a convenient price while the electric energy, in addition to be more expensive is difficult to be found in quantity for industrial productions.
Contact us to take advantage of this new technology.
|
|
INDUSTRIAL GAS OVENS
Emme Group has 30 years of experience in designing and building industrial gas ovens using the most recent and up-to date technology; some of which is of their own invention.
Completely safe, simple to use, with close monitoring of the temperature in use, higher uniformity of heat spread and energy saving ability these ovens have the seal of approval of important groups and customers in various sectors nationally and overseas, including:
* Foundry metal and aluminum
* Forging ovens
* Sintering
* Heat moulding
* Heat treatment for metals in controlled atmospheres
* Ovens for reserch labs
* Ovens fo drying varnish
* Glassworks
* Goldsmith
* Artistic ceramics and porcellain
* Technical ceramics
* Bakers, pizza ovens and patisserie
* Drying ovens
* Heat generators
* Automatic heating systems
* Ovens for free time activities
* Designing of Ovens fo specific client needs.
Our technical office can design and produce ovens according to the client’s specific needs.
Experience, professionalism and a good post-sales assistance including technical assistance guarantee the top quality of our products which are all certified and in keeping with current laws and regulations.
|
|
|
... see all the products in the category
Furnaces
|
Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust gas of engines and transfer it to the water circuit.
These heat exchangers therefore enable waste heat recovery and can be used on cogeneration/combined heat and power (CHP) equipment up to 700 kw.
These exhaust gas heat exchangers are constructed with stainless steel tubes, tube plates and body and cast iron end covers which allows use with biogas, diesel gases and natural gases.
Bowman exhaust gas heat exchangers can also be used to reduce the exhaust temperature in engines operating in hazardous environments where for safety reasons it is necessary to reduce the temperature of the exhaust gases
|
|
Our unique fuel conditioning system with patented deep chill dryer
technology is designed to transform low-pressure landfill or digester
gas containing moisture, siloxanes and other contaminants into dry,
clean, pressure-regulated gaseous fuel that meets the gas turbine's
requirements. With a demand-based fuel supply strategy for reduced
power use and no carbon beds to replace, Ingersoll Rand fuel
conditioning will provide years or trouble-free and low cost microturbine
operation.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
3M produces advanced textiles for manufacturing high temperature filter bags which can be used at temperatures up to 700°F (371°C). This advanced fabric is used successfully in hot gas filtration baghouses.
Features
- Efficient particulate filtration
- High temperature capability
- Resistance to thermal excursions
- Abrasion resistance
- Retrofit existing baghouses
Applications
- Cement manufacturing
- Incineration
- Chemical Processing
- Metal Processing
- Petrochemical processing
- Product collection
- Coal combustion
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
Entis LNG Pro is the latest Windows™ based application for storage management of liquefied natural gas (LNG) in bulk storage tanks under cryogenic conditions.
Entis LNG Pro is based upon the proven Enraf Entis concept, seamlessly integrating all tank instrumentation, and combining interfacing and supervisory control into one platform. This concept provides operators with all key LNG information at a glance.
A comprehensive set of dedicated operations screens for monitoring stored LNG product behavior, makes this software application the only package you need for all your LNG storage monitoring and control needs.
Special operator screens display all necessary profile data for the operator to determine LNG product behavior, controlling stratification build up and other unwanted situations.
Advanced inventory management, trending and reporting capabilities complete the functionality of Entis LNG Pro. Both observed and calculated data are stored in the program database for evaluation purposes.
|
|
|
One of Allen Gears key assets is the ability to use our extensive knowledge of gear technology and application requirements to provide solutions that achieve the optimum transmission solution for the desired drivers. We achieve this through combining the transmission technologies of parallel shaft, epicyclic and bevel gearing to produce combination gearboxes that best meet the installation and operation requirements.
|
|
Through work with EPRI and various utilities, Foster-Miller has designed a specialty minimally invasive system for performing difficult visual inspections in gas turbines. Most gas turbine operators have used borescopes or videoscopes to inspect their equipment and are well aware of their limitations. Borescopes are too stiff to do a variety of inspection tasks, and videoscopes are too flimsy to be pushed very far into combustion cans or up rows of blading. Our custom-engineered tool overcomes these difficulties to provide access to the entire turbine from a few easily accessed ports, resulting in cost savings and reduced downtimes.
To perform a complete combustion system inspection, for example, conventional systems require a great deal of combustor disassembly, making them impractical. Our inspection system can be maneuvered throughout the entire combustion system through the easily accessed flame detector and spark plug ports.
From these access points, the tool can then be maneuvered up and down each combustion can from the fuel nozzles at one end to the first stage nozzles at the other end. The tool can go from can to can by using the cross-fire tubes connecting them. No other tool has the combination of stiffness and flexibility required.
|
|
|
