|
|
EE16 transmitters are the ideal solution for accurate measurement of relative humidity and temperature at a reasonable price in HVAC applications.The well proven E+E humidity sensor in combination with the new designed electronics guarantees excellent long term stability and resistance against chemical pollutants. EE16 transmitters are available as wall or duct mounted, with current or voltage output signals.
Technical data
Measuring range: 10-95% RH; 0...50 °C
Outputs: 0-10V or 4-20mA
Accuracy: +/-3% RH; +/-0.5 °C
Supply: 24V AC/DC
Transmitters of the EE21 series have been developed for high-precision measurement of relative humidity and temperature. EE21 transmitters are available for wall and duct mounting with or without the very useful
snap in-mounting kit, which allows a quick and easy exchange of the transmitter.
Outputs can be selected between voltage and current. An optional radiation shield providing a forced ventilation is recommended for use in outdoor applications.
Special protection coating for the sensing element permits the permanent use in very pollutedenvironments.
Technical data
Measuring range: 0...100% RH; -20...60 °C
Outputs: 0...1/5/10V or 4...20mA
Accuracy: +/-2% RH; +/-0.3 °C
Supply: 24V AC/DC
|
|
The Protimeter product line offers handheld moisture meters and hygrometers for professionals. The primary markets for these products are in the building and construction, wood, agriculture and civil engineering sectors. Building surveyors and inspectors use Protimeter products to measure moisture levels in buildings and to diagnose the cause of moisture related problems. Farmers measure the moisture and temperature levels in harvested crops using our grain moisture meters and civil engineers use the Speedy(tm) moisture testers for establishing the moisture level in soils.
|
|
The S4000 Range of precision cooled mirror dewpointmeters offers the ultimate in accuracy, reliability and long term stability. Chosen as transfer standards by national laboratories world-wide, the S4000 range is renowned for its performance and reliability at a sensible price.
S4000 Integrale As the name suggests, instrument and sensor are integrated into a single bench mounting case available with a neat carry handle and weighing less than 10kg. Thus, making field applications such as critical measurements in power stations, on SF6 switchgear, or on process gases just as practical as the calibration of other hygrometers within a laboratory environment. Total measurement range %u201365 to 40oC dew point.
|
|
Simple
¡ö Large, easy-to-read, graphics LCD with multilingual support
¡ö One-handed menu navigation
¡ö Audio and visual alarm ¨C indicates when climatic conditions
are unsuitable for painting
¡ö No need to consult complex tables or use a slide rule calculator
¡ö Bi-color indicator light ¨C ideal in a noisy environment
¡ö All 5 parameters are constantly updated and
displayed simultaneously
¡ö Graph mode charts all 5 parameters for quick analysis
Durable
¡ö Rugged, outdoor/indoor instrument
¡ö Solvent, acid, oil, water and dust resistant ¨C meets
or exceeds IP5X
¡ö Scratch/Solvent resistant display suitable for harsh environments
¡ö Shock-absorbing, protective rubber holster with belt clip
and wrist strap
¡ö Two (2) year warranty on both body and sensors
Accurate
¡ö Fast response precision sensors provide accurate, repeatable
readings with high reliability and long term stability
¡ö Smart Trend Indicators identify rising, falling or stable readings
¡ö Certificate of Calibration showing traceability to NIST included
¡ö Conforms to national and international standards including
ISO 8502-4, BS 7079-B4, and ASTM D3276
Versatile
¡ö Internal Memory stores 2,500 datasets in 100 batches
with the simple touch of a button
¡ö Data Logger Mode automatically records all 5 parameters
at user selected time intervals. Ideal for unattended operation.
¡ö Built-in clock ¨C date and time stamps each stored measurement
¡ö Easily converts to accept optional probes including magnetic
and hand-held surface temperature probes
¡ö USB and IR ports for downloading to a PC or printer
¡ö Celsius/Fahrenheit switchable
¡ö Backlit display for dim or dark environments |
|
Handheld thermo-hygrometers of the HUMIPORT series set new standards because of the combination of the latest technology and design. HUMIPORT thermo- hygrometers offer very accurate measurement of relative humidity and temperature and also calculation of dewpoint temperature and absolute humidity.
Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow use in tough industrial environments.
3 models are available:
HUMIPORT 05: Compact handheld thermo / hygro- meter with fixed sensing probe
HUMIPORT 10: Handheld thermo / hygrometer with fixed sensing probe
HUMIPORT 20: Handheld thermo / hygrometer with flexible sensing probe
|
|
Easidew Portable Hygrometer has been designed to make in-field checks of the dew point in air and gases as simple and quick as possible. This totally self-contained instrument, weighing only 4 kg, is delivered ready to use. Simply connect your sample gas to the Quick Connect fittings, turn on the instrument and it will instantly trend the dew point of the applied sample.
The key to Easidew's performance is its sensor technology. Michell%u2019s Advanced Ceramic Moisture Sensor is coupled with C2TX microprocessor based measurement circuitry to produce a fully calibrated and interchangeable sensor transmitter module.
An in-built sampling system allows you to easily measure the dew point of any air or gas line, clean or dirty, at up to 20 bar pressure. A fixed orifice port arrangement allows you to select, simply by reversing inlet and outlet ports, whether to measure at atmospheric or line pressure. The integrated filter housing, accepting standard fibre filter cartridges, gives 99.999% protection against particles to 0.1 micron and to liquid carryover. All this comes as standard.
|
|
Vaisala DRYCAP® Hand-Held Dewpoint and Temperature Meter DM70
The DM70 measures dewoint temperature accurately over a wide measurement range. It is ideal for indstrial spot checking and field calibration.The probe may be inserted directly into pressurized processes, and it responds rapidly from ambient to process conditions. The sensor withstands condensation.
The DM70 features a multilingual, menu-based user interface, and a clear graphical LCD display. Three measurement parameters can be displayed, numerically or graphically, and are logged into the meter's memory. An analog output option is also available.
|
|
| ... products without technical information |
| |
PRECISION MEASUREMENT & CONTROL SYSTEMS - PIPES & TUBES INDUSTRY
Beta LaserMike offers a complete line of process control instrumentation for the manufacture of products such as tube and pipe extrusions. Our systems offer varying levels of capability, utilize different measurement techniques, meet the needs of both on-line and off-line applications, and can be customized to fulfill your specific requirements.
* ID/OD/Wall Measurement
* Tolerance Checking
* Process Control
* SQC Graphical Interface
* Concentricity Measurement
* Weight & Throughput Measurement
* Non-contact Length and Speed Measurement |
|
The measuring systems series MFE (metrology front end) is
particularly suited to manufacturers of structured wafers, masks,
MEMS and similar products. Because of the very high cleanliness,
process and yield requirements, all tools are especially designed
for use in cleanrooms.
MFE systems measure critical dimensions and overlays on the
one hand and 3D topography or film thickness on the other.
All tools are metrological and comply with the necessary industry
standards such as the SECS II / GEM software interface.
Furthermore, the system is fully automated and equipped
with wafer cassettes and part carriers.
An EFEM and mini-environment for class 1 cleanrooms
rounds off the upper segment of the MFE tool series. |
|
The MicroGlider® is the highly precise, multi-sensor platform
measuring system from FRT intended for especially accurate
measuring applications. A linear motor driven, non-contact
air bearing x-y stage guarantees best precision motion during
stage movement. Hence the MicroGlider® measures profile,
topography, roughness, and coating thickness with further
enhanced accuracy. The MicroGlider® is also equipped
with a CCD camera for easy sample positioning and can
automatically perform predefined measurements. |
|
On-line thickness measurement systems for:
* flat films and sheets, thermo-formed sheets made of PET, PVC, PUR, etc.
* coexruded film
* coated and uncoated rubber sheets
Thickness range: 10 µm ... 6 mm
Measuring uncertainty: 1 % of reading
The measuring system is unaffected by variations in density, humidity and colour of the material t be measured as well as unaffected by variations in temperature or vibrations of the surrounding fields. |
|
Alignment and measurement of straightness, flatness, perpendicularity and parallelism
The FixturlaserGeo-series is a 1- or 2-axes alignment system for measurement, alignment and documentation of machine positioning. Typical applications are measurements of straightness and flatness on objects, such as machine tables, machine guides, rollers, or any component in your facility that requires high precision alignment and positioning.
The Fixturlaser Geo-systems are available with a series of different laser transmitters, receivers and fixtures for specific applications. All transmitters are interchangeable providing easy upgrade for future needs.
Optimized packages:
- Depending on the specific application, there are different packages with different laser transmitters and fixtures.
- Flatness measurements are performed in one axis.
- Straightness measurements are performed in one or two axes with up to 99 measurement points.
- Live values are displayed during adjustments.
T- he measurements can be stored with individual comments to each measurement point for transfer to a PC or printed on the supplied printer. |
|
Atomic Force Microscopy
Atomic Force Microscopes (AFMs) scan the surface of a sample using a very fine tip on the end of a microscale cantilever.
Atomic interactions between the tip and the surface lead to a deflection of the cantilever which is then detected by a piezoresistive element. Based on this effect, the AFM can measure the topography or roughness of a surface with very high resolution non destructively. The AFM can be used in different operating modes and thus allows for the investigation of further properties, such as electrical and magnetical forces or elasticity of a specimen. |
|
Grinding relief quality measurement of threads and chamfers on taps:
The measuring device RELIEF EXPERT is designed for precise measurement of the grinding relief of threads and chamfers on almost all types of straight and spiral fluted workpieces.
- taps
- thread formers
- thread milling cutters
|
|
Description:
Nowadays, the properties of surface topographies are increasingly influenced by new processing methods and new materials.
The traditional profile stylus method is often not adequate to characterize the functional behavior of surfaces. Three-dimensional recording and evaluation are required. Soft and thin-walled materials also require non-contact measurement.
Moreover, ever higher levels of surface quality are being achieved, greatly increasing the requirements placed on measuring systems in terms of resolution and measuring accuracy.
The MarSurf WS 1 satisfies all these requirements:
- Vertical resolution 0.1 nm (.004 µin)
- Three-dimensional measurement and evaluation in only a few seconds
- Compact measuring station configuration for the workshop and laboratory
- MarSurf XT 20 software
- Topographical evaluation software on the fully standardized and powerful MarWin software platform |
|
Features :
- Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
roughness and contour characteristics at a glance. So you have more time for other things!
- State-of-the-art measuring technology for small tolerances. The integrated optical measuring system provides pinpoint accuracy over a broad measuring range and at maximum resolution. You can process jobs with low tolerances and thus tackle new challenges head-on.
- Innovative tracing arm concept for maximum stability The tracing arms, which have been designed using bridge-building techniques, ensure maximum rigidity, low-oscillation measurements and unwavering precision. So you can build your own bridges - to new dimensions of flexibility!
- Tracing arms with magnetic connection The magnetic mount ensures excellent system protection and a long service life. |
|
Air carriage LMS 0404
Profile measurement of the effective kind
Technical data:
Measuring section 150 mm
Straightness of the guide 0.1 µm
Load-carrying capacity 10 kp
Workpiece photograph surface 70 x 120 mm
X axis with highly exact Glasmaßstab
Fine adjustments with micrometer screws for:
Dumps - swivelling - shifting
Operation system Windows XP-Professional
Evaluate - computers with suitable software - data base - CNC of programs
Evaluation possibilities such as straightness, parallelism, taper and crowning |
|
Micro DATA manufacturer measuring technique
The micro DATA sheet metal samples measuring position BPM 3 developed in co-operation with a large Austrian work
and should the following criteria fulfill:
1. Fitting of 3 feed units GD 25 Mahr with Tastsytem 250
2. Simple control surface with common indicator of the three roughness of channels
3. Computation of the roughness parameters
4. ACCESS data base for the long-term archiving of the results of measurement
5. TCP/IP interface with remote ones instructions for remote control. |
|
Precision sensors for fast, accurate acquisition of component dimensions and surface data.
The world's leading range of touch-trigger and scanning measurement systems for co-ordinate measuring machines (CMMs), plus the revolutionary Renscan5%u2122 5-axis scanning technology.
|
|
Intelliprobe™
The Intelliprobe™ for the API Laser Tracker is the ideal tool for large and complex parts. With the help of the Intelliprobe™ it is now possible to use the superior range of the API Laser Tracker to measure hidden geometry and even points from larger structures and assemblies.
Unlimited measurements
Geometry measurements without direct line of sight with the laser beam often pose challenges to laser tracker users. However, this is not the case when using the Intelliprobe™ from API.
Intelliprobe™ advantages:
*
Uninterupted measuring made easy: The laser beam can be recaptured with the Intelliprobe™ at any time
*
More Options: Even the most difficult to measure hidden structures are made simple with the Intelliprobe™. Optional probes lengths are available up to 700 mm
*
With intelligent accessories such as the Intelliprobe™ , the user is able to extend the range of application of API Laser Tracker.
Unsurpassed Handling
The Intelliprobe™ from API captures hidden geometry and obstructed points easily, as the probe is able to swivel around its own main axis. Thus, the system is easy to use for over head measurements which are usually difficult to reach. Together with the T3™ Laser Tracker from API, the Intelliprobe™ is the most compact 6 DOF-System on the market. |
|
Leica T-Probe is a “Walk-Around” armless wireless probing device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons
Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30m (98ft) in any dimension. |
|
| ... products without technical information |
| |
| Our systems for gas permeability measurement for plastic and rubber samples have simplicity, excellent selectivity, high sensitivity and wide dynamic range. The measurable permeating components include water vapor, hydrogen-sulfide, methane, ethane, carbon-dioxide, BTEX (Benzene, Toluene, Ethyl Benzene and Xylene), ammonia etc. There are two basic forms of our systems; the first one, which is based on photoacoustic gas detection, is optimal for measurements at normal pressure and temperatures up to 120 ° C. The second one, which is based on photothermal beam deflection method, can be used also at extreme pressures (up to 1000 bar) and also at high temperatures. An outstanding feature of our system is that due to the very high dynamic range of the measuring method, it is possible to fit numerically the early part of the permeation curve, which results in a considerable reduction of the measurement time |
|
The oxidation stability of biodiesel can easily be determined with the 873 Biodiesel Rancimat from Metrohm, a modern and reliable instrument with a 3 years’ warranty. In addition to reliable hardware and easy operation, it offers all the comfort to be expected from a PC-controlled instrument.
The method: oxidation stability according to EN 14112
The determination of the oxidation stability according to EN 14112 is an accelerated oxidation test. The sample is held in a sealed reaction tube at a constant temperature of 110 °C while a continuous flow of air is passed through the sample. The fatty acid methyl esters (FAME) in the sample are oxidized to peroxides as the primarily oxidation products. After some time, the fatty acids are completely decomposed into the secondary oxidation products. In addition to volatile organic compounds, these are low-molecular organic acids, mainly formic and acetic acids. An air flow transports them to a measuring vessel containing distilled water as the absorption solution. |
|
Ear Measuring Instrument, Model 126
Used to obtain a numerical value of the size of the ears resulting from anisotropy in the material of cylindrical deep-drawn cups (e. g. according to DIN 50 155). The average cup height, the height of the ears in percent and in mm can be read-off at a touch of a button and are shown on the digital display instrument. To enable additional data processing the test instrument can be equipped with interfaces, such as BCD or RS 232 C outputs and with a printer. |
|
PetroOXY
Automatic Rapid-Oxidation-Stability Test of FAME
a new method to evaluate the storage stability of liquid fuels and offer the opportunity of an automatic instrument.
Both, the method and the instrument are designed in a way that they do not exceed the average test-time of other methods specified for releasing a fuel from any production facility or other storage.
Suitable for: Biodiesel, Biofuel, Diesel, Gasoline, Motor Fuel, Motor Gasoline |
|
|
|
see the results for the following category