|
|
The HMP228 is a fast, reliable and accurate on-line detection system for water in oil.
Moisture measurements from lubrication oil can significantly cut maintenance costs and prolong machine lifetime. The HMP228 measures water activity and temperature from oil. In connection with oil, water activity measurement offers several advantages compared to the traditionally measured variable, parts per million (ppm). Water activity indicates directly whether there is risk for free water formation. The measurement is independent of the type, aging or temperature of the oil.
|
|
| ... products without technical information |
| |
The oil control system controls the oil level in the manufacturers of compressor crankcase. The system consists of the following ESK-components:
• ESK – Oil Seperators
• ESK – Reservoir
• ESK – Oil Level regulators
• ESK – Pressure Cock
• ESK – Strainers
The oil carried over by a compressor in parallel systems has to be returned in the same quantity under all operating conditions. ESK-Oil control systems provides this control and works reliable.
Oil control systems are essential to control oil level if different compressor models are equiped in one a refrigeration system.
|
|
| ... products without technical information |
| |
TCAZ/TCASZ :
- Knurled plugs with dipstick
- Knurled plugs with dipstick and breather hole
TCA/TCAS :
- Hex plugs with dipstick
- Hex plugs with dipstick an breather hole
TMDA/TMDFA/TMDFA-BR :
- Filler breather with large breather hole and dipstick
- Filler breather with large breather hole, dipstick and professional filter
- Filler breather with large breather hole, dipstick and filter in sintered bronz
TMDFA/AL :
- Filler breathers with dipstick, anti-splash disc
TMDAV :
- Filler plug with one way air vent cock and dipstick
TPA/TPFA/TPAV :
- Press-fit filler breather with large breather hole and dipstick
TPBA/TPBAS/TPBAF :
- Low profile press-fit plug with dipstick
- Low profile press-fit plug with breather and dipstick
- Low profile press-fit plug with breather, filter and dipstick
TFA :
- Filler breather caps with internal thread and dipstick
AL/1 - AL/2 - ALS/1 - ALS/2 :
- Dipstick, press-fit with one seal
- Dipstick, press-fit with 2 professional seals
- Dipstick, press-fit with one seal and breather hole
- Dipstick, press-fit with 2 seals and breather hole |
|
Multipurpose oil and gas quenching industrial furnace with two chambers
Compact system for minimum space requirement
Gas quenching possibility allowing the treatment of huge grade of steel
Heating chamber held in temperature for important energy saving
Fully automatic handling device by deformable parallelogram and telescope
|
|
Technical data :
Max. temperature : 90°C
Frequency : 50Hz
Votage : 3x400V
Power : 3,5 kW
Capacity of the professional tank : 90 l
Inside dimensions : L 280mm, H 300mm, P 320mm
External dimensions (±10%): L 525mm, H 750mm, P 760mm
Equipment :
- Isolated metallic casing.
- Agitator at the rear of the tank to obtain a good uniform oil temperature.
- 2 immerged heaters with integrated temperature control.
- Tank cover.
- Oil industrial drain cock.
- Basket with handles for the quenching of parts and their draining off.
- Filling and working oil level indicators.
- Nominal power of the professional fan: 1500 m3/h. |
|
Our field power plants manufacturers range from 1 to 300 MW. Proven reliability, fuel flexibility and low emissions make the plants suitable for demanding applications in the oil and gas industry, such as processing facilities, pump stations, compressor stations, marine terminals etc.
Modular design
The modular design of our field power plants enables trouble-free installation and fast-track delivery anywhere in the world. Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size by adding additional generating sets. This means you can get started with a smaller initial investment.
Multifuel capability
Our power plants can be run on either associated gas or crude oil, residual or diesel oil. This enables the operator to choose the fuel with the lowest price and best availability. The system is also tolerant against fuel quality variations and as such suitable for oil field power generation.
|
|
Our oil power plants range from 1 to 300 MW. High efficiency, low emissions and proven long-term reliability make these plants suitable for stationary and floating baseload, as well as stand-by applications. Worldwide deliveries of our liquid-fuelled power plants exceed 28 GW.
Modular design
The modular design of our oil power plants enables fast-track delivery anywhere in the world. Our 100 MW power plant can be in commercial operation in as little as nine months from order placement.
Prefabricated, functionally pretested modules guarantee consistent quality and performance. Site installation is simply a matter of assembling and connecting the modules.
Smaller initial investment
As your needs change you can change the plant size stepwise by adding or removing generation sets. This means you can get started with a smaller initial investment.
|
|
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x
The robust housing of the OMNIPORT 20 allows usage in harsh industrial environments.The readability of the large illuminated display is excellent. The easy to understand menu and the practical thumbwheel navigation offer outstanding comfort.
An optional carrying case can accommodate the display unit, up to 5 sensing probes as well as accessories such as cables and calibration kits.
|
|
Vaisala HUMICAP® Hand-Held Moisture and Temperature Meter for Oil MM70 enables reliable detection of moisture in oil. It is ideal for the preventive maintenance of oil-filled systems. The brobe can be inserted directly into the process pipe through a manufacturers of ball valve - without draining the system. The measurement is independent of oil type, age and temperature.
The MM70 features the Vaisala HUMICAP® Sensor which is known for its excellent pressure, temperature and chemical tolerance.
|
|
Our new SELF SERVICE diesel fuel dispensers have been designed on the basis of in-depth studies of users' requirements.
Here is what users are looking for:
- Sturdy make and attractive design. The dispenser should be solid, but that doesn't mean it has to be unsightly.
- Fast refuelling.
- Accuracy and reliability. The on-board flow-meter must be precise and consistent over time.
- Must allow data management and select authorized users.
- Must be connectible to a PC for exporting data files and capable of running programmes that keep track of all refuellings performed.
- On-board professional printer for issuing receipts.
- Level-gauge showing current tank levels.
- Professional filter for separating any water contained in the diesel fuel.
- Competitive prices.
In reply to these needs we have produced a complete range of newly-designed fuel dispensers. Modern and attractive, they are compact and sturdy, and thanks to a lockable front door on professional hinges, the internal organs can be easily accessed for maintenance. |
|
Features:
- Integrated unit for layout flexibility
- Smooth operation of open sump and vertical inlet which prevents air locking
- Cantilever design without submerged bearings suppliers or shaft seal rings
- Bearing assembly with double protection sealing arrangement to prevent ingress of slurry
- Wear parts are available in a variety of different materials and are fully interchangeable
- Simplified maintenance features |
|
Series 7100
Brass housing
N-model Carbon graphite to tungsten carbide industrial seal
D-model Tungsten carbide to tungsten carbide seal (for applications with poor filtration water, or abrasive fluids)
Recommended medium: water, heat transfer oil, steam
Available sizes: 1/4" - 2"
Max. pressure
water
sizes 1/4" - 1 1/2" 50,0 bar
size 2" 40,0 bar
steam 8,0 bar
heat transfer oil 6,5 bar
Max. temperature
heat transfer oil 200 °C
steam 170 °C
water 175 °C
Max. speed
sizes 1/4" - 3/4" 3500 RPM
size 1" 3000 RPM
sizes 1 1/4" - 1 1/2" 2500 RPM
size 2" 750 RPM |
|
N Series Steam and Hot Oil Unions
- monoflow design: N10
- monoflow and duoflow design: N12
- self-supported rotating union
- large carbon industrial graphite bearing
- pressurized spherical carbon graphite professional seal
- cast iron housing
- stainless steel rotor
9000 Series Steam and Hot Oil Unions
- monoflow and duoflow design
- self-supported rotating union
- spherical Carbon Graphite seal
- seal wear indicator allows preventive maintenance
- 2 torque lugs on the housing
- nickel-plated cast iron housing
- steel rotor, nickel-plated for steam service
H Series Steam and
Hot Oil Unions
- monoflow and duoflow design
- self-supported rotating union
- convex seal ring better suited to handle mechanical and thermal
shock
- two widely-spaced graphite bearings suppliers
- H57 - H127 optional with sight glasses in the end cap
for visual inspection of condensate romoval
- seal wear indicator allows preventive maintenance
- flanged or threaded rotor available
- cast iron housing
- stainless steel rotor
- for steam and hot oil applications in paper, plastic and
textile industries and open gear paper machines |
|
Gas strainer with polypropylene fleece professional filter pad (standard 50 µm) for cleaning gas and air, EC type tested and certified.
DN: 15 to 250,
connection: thread or flange,
pe: max. 1, 4 or 6 bar.
|
|
The emulsions used in mechanical workings and the liquids used in industrial washing machines, accumulate light products which do not mix with water on the surface.
This veil, which can reach considerable sizes, from 0,1 to 2 mm, creates a barrier and prevents air from entering into contact with the emulsion.
This allows for the formation of anaerobic flora bacteria, which are the main causes of the decay and the putrefaction of the emulsions.
The SKIM eliminator of superficial oils, thanks to its particular shape, to the materials used and to its installation and utilization facility, is adaptable to being used in any kind of basin or professional tank.
Due to its great supply of accessories it is possible to position the SKIM either on the basin edge, or on the cover, or encased, or on an internal structure.
Functioning: the disc, immersed into the liquid, due to its rotation, pushes outside the polluting agents that stick to it.. The disc, whilst rotating, meets two scrapers fitted with a rubber edge which remove everything that gets stuck to the disc and through the appropriate off-let directs them outside.
It has been proved that the use of SKIM maintains the quality of the refrigeration for a long time whilst eliminating bad odours that generate in the presence of anaerobic flora bacteria. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
