|
|
Composite cables
Axon' design and manufacture composite cables specially designed to meet customer requirements irrespective of the application.
They are able to resist the most demanding electrical, mechanical and environmental requirements.
Advantages
Dependent on the application
- Flexibility
- Flexlife, resistance to torsion
- Resistance to fuel, heat and solvents
- EMI protection
Resistance to sterilisation (medical application)
Construction
- Flat or round construction integrating flat or round wires, coaxial cables, tubes, shielded cables, ...
- Hybrid electrical, electro-optical cables
Composite cables insulated with fluorinated materials, heavy metal free materials, halogen free materials, PTFE, celloflon®, vitax™, PEEK, silicone and other materials suited for your applications
Applications
- Electromechanics
- Engines
- Machines
- Robots
- Medical imaging
- Endoscopy
- Radars
- Missiles
- Electronic systems
- Satellite cabling
- Research, ...
|
|
|
|
|
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
-DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
-SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
-FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
-INSTRUMENTATION CABLES
Seismic and oceanographicals
-INBOARD CABLES
Power and control cables for naval defence and maritime industry
-HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
-TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
|
|
|
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
- DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
- SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
- FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
- INSTRUMENTATION CABLES
Seismic and oceanographicals
- INBOARD CABLES
Power and control cables for naval defence and maritime industry
- HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
- TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
|
|
|
|
MARINE AND UNDERWATER APPLICATIONS
LAPP MULLER works with ships and underwater building repairs companies (welding, cutting, etc…), offshore oceanographic institutes, research centers, manufacturer of underwater acoustic instrumentation and engineering companies, ect… on the design and manufacture of composite electrical or optical cables.
-DIVING UMBILICALS
(power, signal, video, hydrolic )
Diving bells, narguiles
-SUB MARINE UMBILICALS
(electrical, optical, hydraulic and mechanical functions )
Submarine works, offshore working and research
-FLOATING CABLES
ROV Tethers, sonar supply
- ARMOURED CABLES
ROV Main Lift Cable, Tow Cable, Submarine antennas
-INSTRUMENTATION CABLES
Seismic and oceanographicals
-INBOARD CABLES
Power and control cables for naval defence and maritime industry
-HIGH TENACITY FIBER CABLES
Stay mast antennas, mooring line for baskets, for buoys
-TERMINATIONS
Design, Realization and Fitting of stainless, titanium or other special alloy terminations.
- CONNECTORS MOUNTING
These companies trust us :
DCN, IFREMER, THALES UNDERWATER SYSTEMS, ECA,, COMEX, SINGLE BUOY MOORINGS...
|
|
|
|
|
|
Cabelte produced the first optical cable (multimode) in Portugal, in 1983. The cable was supplied to “Instituto para Desenvolvimento das Comunicações (IDC)” for the trial connection between “IDC” and “Inesc -Instituto de Engenharia de Sistemas e Computadores”.
The first cables produced for commercialization, called “light guide cables”, were made of 50/125 multimode fibers, tight structure, and had 4 to 6 fibers, regular customers were the former “CTT/TLP”, today “PT Comunicações”.
The big increase occurred in the production of optical fibre cables at Cabelte takes place at the beginning of the 90s, with the construction of a new plant and with the introduction of “loose” technology.
Since then, optical fiber has become more and more important and today is one of the most important telecommunication channels, due to the characteristics of the fiber itself, particularly its low attenuation associated with an almost infinite bandwidth (single mode fibers), and to the development occurred in the optical transmission systems.
Today, optical fiber cables are part of all communication “backbones” in metropolitan and regional networks. The presence of “triple pay” services, interactive games, high definition television, telemedicine, among others, requiring a high bandwidth in the access network, foresee the gradual replacement of copper by fiber optics up to the subscriber.
|
|
|
Parflex welcomes Cabett Subsea to the Fluid Connector Group. Cabett Subseas state-of-the-art dockside umbilical manufacturing facility at Port Freeport, Texas, designs and manufactures Hydraulic Umbilicals and Floating Production Facilities for the Oil & Gas Market.
|
|
Dexter is an authorized distributor of ferrite cores for EMI applications. Our product line includes top manufacturers, such as:
>Fair-Rite Products
>TDK
>EPCOS
>Magnetics, Inc.
>Ferronics
>Acme Electronics
We have the industry’s largest in-stock inventory of:
>Round Cable EMI Suppression Cores
>Split Round Cable EMI Suppression Cores
>Round Cable Snap-its
>Flat Cable EMI Suppression Cores
>Flat Cable Snap-its
>Toroids
|
|
N-X INVERTER OUTPUT FERRITES
General purpose filter
Output Ferrites (N-X) are especially effective in reducing electromagnetic interference from the motor cable, as they introduce an impedance between the Inverter and the motor.
Output ferrites are particularly useful in reducing electrical noise in the frequency range 5 to 20 MHz, as there is no other suitable noise suppression means in this frequency range. Output ferrites should be placed around the cable between the Inverter and Motor, as near as possible to the Inverter.
The cable (excluding earth wires and shielding) should pass through the ferrite at least twice.
|
|
Ferrites
Richco offers a wide variety of ferrite cores to solve all your EMI/RFI problems. Our range extends from solid, split ferrite for round and ribbon cable, to Surface Mount Devices (SMD) Ferrite chips, beads and inductors. The ferrite materials exhibit magnetic properties that are dependent upon the frequency at which they operate. The suppression of EMI has become a major concern in the electronics industry, where it is now common that EMI suppression ferrites are often used as two terminal circuit elements. Richco’s ferrite range is manufactured in a variety of materials to suppress EMI/RFI interference or a wide range of cable diameters and PCB configurations. Richco’s aim is to give you total peace of mind that your application is protected from EMI interference at all times.
|
|
| ... products without technical information |
| |
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
CABLE POWERED SHUTTLE CAR
Ø Increased Payload
Ø New Improved Wheel Units
Ø Heavy Duty Unibody Construction
Ø State-of-the-art traction controller
Ø State-of-the-art conveyor controller
Ø Heavy duty frame construction
Ø Features a large operator compartment designed for optimum visibility and operator safety.
|
|
Vertical cable coil storage provides a considerable saving in space compared to the traditional ground storage systems. Space utilization rations can be as high as 1 to 5 if the drums are arranged vertically up to heights of 5m, allowing on average 5 drum levels.
This system not only allows for a better use of space but has other advantages such as:
„X quick identification of the drums to be withdrawn;
„X quick withdrawal of cable lengths directly from the stored drum.
The drums are fastened to a shaft with locking cone on supports that allow the rotation of the drum and therefore high speed unwinding with our machines.
Our racks are also provided with patented safety system (quick functional operation) to prevent the drum coming out of position and this allows the operator to work safe however the drum is placed (cable top up or down).
|
|
ShelfStore
Axelent’s ShelfStore is a practical and very rigid mesh shelving system that is equally suitable for storing small items individually or for goods on pallets. Mesh shelves do not gather dust and will let through light and water, which is often a requirement if a sprinkler system is used.
All the parts for ShelfStore have been designed to make handling as safe and straightforward as possible. For example, the wires on the top of each shelf run the full depth of the shelf, allowing goods to be slid in and out easily. The L-shaped front section also ensures that the shelves sit securely in the rack and do not require bolting. This facilitates the work involved when modifying or extending your warehouse or stores. ShelfStore is available in a variety of different sizes, and is supplied wrapped on pallets.
|
|
VERTICAL RACK FOR COILS AND REELS MAX DIA.700 MM DIAM. ART. SU.
(Special version up to dia.1000mm).
|
|
|
Using its knowledge and experience in the field of material design, Raychem has pioneered some of the most important technical advances in cable accessory technology. Heat-shrinkable accessories are well accepted for medium-voltage distribution by utilities, equipment manufacturers and industrial users throughout the world. For fifteen years, accessories have also been available for 69kV, 72kV, 84kV transmission-voltages. For higher voltage classes we offer 145kV to 170kV prefabricated joints and terminations for indoor and outdoor switchgear and transformers
|
|
| ... products without technical information |
| |
|
|
|
|
Our cabling systems may be divided into two groups according to their field of application:
Systems for building installation:
ecobus power 5x10 mm²
The system for building automation. Both power current lines 5x2,5 mm² and bus lines 2x1,5 mm² with twin shielding are combined in one sheath. This means that the bus lines must not be interrupted any more for connecting devices - a principle, that was only used for power current lines until now. Thanks to ecobus combi, the bus installation requires a minimum of wiring works. Due to the decentralized repartition of the bus devices, the structure of the installation suits perfectly every type of requirements.
ecobus combi 5x2,5 mm² 2x1,5 mm²
ecobus power 5x2,5 mm²
ecobus data 2x1.5 mm²
multibus 4x1,5 mm²
ecoline-p3 3x2,5 mm²
Systems for industrial application:
ecofil i 5x16 mm²
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
|
|
see the results for the following category : 
