|
|
Moog has comprehensive experience within the range of electrohydraulical drive solutions. We use the application experience of our engineers, in order to develop efficient hardware, the customer requirements regarding achievement, size and technical characteristics fulfilled.
As market leader for servo-hydraulic and servo-electrical products and drive systems for industrial applications Moog supports customers with the analysis of its drive need, in order to come in such a way to the best solution.
Ranges of application
Employment in the plastics industry
Test and applications of simulation
Employment in the deformation technique and within the range presses
|
|
One of our real strengths is in know-how gained from special solutions. Hänchen's standard range of products has for decades benefited from the know-how gained from the countless special solutions which our specialists have created for customers. Knowledge breeds success.
That is what has led, for instance, to special cylinders for water hydraulics made from stainless and non-magnetic materials, with twist-lock, special dampers, special seals, compensating valves in the piston, metering cylinders, three-position cylinders, rapid/force-speed cylinders, high-speed cylinders up to Vmax. 40 m/s, lifting/adjusting cylinders, cascade cylinders, core-pulling cylinders, multi-position cylinders, plunger cylinders, control and servo-cylinders, synchronous cylinders, tandem cylinders, telescopic cylinders, cooling jacket cylinders, hollow-piston cylinders, oscillation cylinders, tensioning cylinders, locking cylinders - a solution for every problem - right through to customised special developments.
|
|
By direct coupling minimizes lost motion (mechanical output : 90 to 95%). Rotary actuators offer distinct torque advantages for start/stop operation and the acceleration of large masses, and provides designers with an ideal power source for all type of mechanical motion.
Applications :
- toggle push clamp
- continuous rotation
- index – position
- turn and oscillate
|
|
MMB Cylinders Parker's MMB series hydraulic 'roundline' cylinders are heavy duty cylinders designed for service in arduous applications such as steel mills, where a rugged, durable cylinder with a 'clean' external design is required.
MMB cylinders are designed to ISO 6020/1 specifications.
Standard pressure: up to 160 bar
Bore sizes: 40mm to 320mm
Piston rod diameters: 22mm to 220mm
6 standard mounting styles
Any practical stroke length
Standard temperature range: -20°C to 80°C
Options include cushions, stop tubes and oversized ports
Special designs to customer specification
|
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
Technical data of Hänchen hydraulic cylinders:
Series 120 – 150 bar with/without final stroke cushioning
Piston Ø from 12 – 600 mm,
forces from 1,7 - 5655 kN,
stroke up to 7500 mm
Series 300 – 300 bar with/without final stroke cushioning
Piston Ø from 25 – 600 mm,
forces from 14,7 - 8482 kN,
stroke up to 7500 mm
Series 100 as per DIN 24336
Piston Ø from 25 - 200 mm,
forces from 4,9 - 314,2 kN,
stroke up to 7500 mm
Series 160 medium as per DIN ISO 6020-1
Piston Ø from 25 - 200 mm,
forces from 7,9 - 503 kN,
stroke up to 7500 mm
Series 160 compact as per DIN 24554/ISO 6020-2
Piston Ø from 25 - 200 mm,
forces from 7,9 - 503 kN,
stroke up to 1500 mm
Series 250 as per DIN 24333/ISO 6022
Piston Ø from 50 - 200 mm,
forces from 49 - 785 kN,
stroke up to 7500 mm
Other dimensions on request
Products of the range of services:
- Clamping devices for piston rods (Ratio-Clamp®)
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories
|
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here.
Our engineers many years of experience and competence guarantee that this requirement is met correctly and in the best possible way. KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs.
|
|
Construction: Steel, Tie rod design; Repairable
Standards: NFPA Heavy Duty Hydraulic, ANSI/(NFPA)T3.6.7R2-1996
Bore Size: 1 1/2" through 6"
Strokes: Available in any practical length
Piston Rod Diameter: 5/8" to 4"
Operating Medium: Hydraulic oil
Mounting Styles: 18 Standard
Nominal Pressure: 3000 psi
Standard Operating Temperature: -10°F to +165°F
Optional High Temperature Option -10°F to 250°F
Rod Ends: Three standard choices; specials to order
Cushions: Optional at either or both ends
SAE "O" ring ports are standard, others are available
|
|
Construction: Steel, Tie rod design; Repairable
Standards: NFPA Heavy Duty Hydraulic, ANSI/(NFPA)T3.6.7R2-1996
Bore Size: 1 1/2" through 6"
Strokes: Available in any practical length
Piston Rod Diameter: 5/8" to 4"
Operating Medium: Hydraulic oil
Mounting Styles: 18 Standard
Nominal Pressure: 3000 psi
Standard Operating Temperature: -10°F to +165°F
Optional High Temperature Option -10°F to 250°F
Rod Ends: Three standard choices; specials to order
Cushions: Optional at either or both ends
SAE "O" ring ports are standard, others are available
|
|
Series AV2, HV2, A2
The Back-To-Back Cylinder is used where three or four-rod positions are required. Two cylinders are attached back-to-back using common tierods. Different strokes on each cylinder give the capability of four positive stop positions.
Advantages: Four positive stop positions possible, two cylinders with common tierod, independent rod movement on each end of unit.
|
|
Maximum Cylinder load 150 kg; please check also the maximum system load
Cylinder stroke up to 600 mm
The Cylinder requires an external guide mechanism. Please take care that there is no side load on the Cylinder
The tube connections and the piston rods can be combined in the way you prefer
|
|
3000 PSI WHD SERIES CYLINDER
FEATURES:
Configurable custom rod design
1-2 week lead-time
manufactured with Parker “Zero Leak” sealing technology
BENEFITS:
Additional outside diameter lip that prevents contaminates from entering the system by bypassing the OD of the wiper body.
Superior BTU rod seal increases the conformity of the seal to the rod. The second lip on the seal improves stability, limiting the rocking motion of the seal to reduce seepage
Buffer ring acts as a primary seal and pressure spike suppressor. The combination of rod seal and buffer ring results in an exceptionally dry rod for longer life.
Piston includes 2 wear rings and bronze filled PTFE seal designed for extension free, leak proof service
1045/1050 chrome plated, induction hardened, 100K rod is more resistant to damage to rod and seal
1026 DOM cylinder tube bores are skived and roller burnished to provide precision finishes for extended seal life
|
|
MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial and mobile applications.
Two versions are available: the MWA Series for use at working pressures up to 250 bar, and the MWB Series for 160 bar applications.
The MW range of cylinders is of welded construction at the cap end, with a threaded rod bearing at the head housing the gland seals.
Standard pressure: up to 160 bar (MWB) and 250 bar (MWA)
Bore sizes: 32mm to 200mm (MWB) and 50mm to 200mm (MWA)
Piston rod diameters: 14mm to 125mm (MWB) and 32mm to 200mm (MWA)
5 standard mounting styles
Stroke lengths up to 4000mm
Standard temperature range: -30°C to 80°C
Options include air bleeds, position switches and custom paint finishes
Special designs to customer specification nbsp;
|
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
Cylinders Compact CHL and CHH
Description:
- Compact Hydraulic cylinders of "blocking" for double purpose allowing to apply forces up to 80,4 kN for maximum races de100mm by step of 5 and 10mm.
- Available for operating pressures of 100 bar, version CHL with body aluminum and 160 bar, version CHH with body steel.
- A magnetic detection is integrated out of standard for model CHL and option for model CHH.
- Detectors of position fit in the grooves of the body for the CHL.
Advantages:
- Cast solid Body.
- Great rigidity.
- Durable Coating corrosion resistant.
- Bearing unit of stem made safe by retainer, resistant to the vibrations: high frequencies applications.
- Reliability and easy maintenance.
- Unit /piston stem out of steel high resistor chrome hard.
- Piston made safe by joining and locating. Simple or double stem.
- Option grooves keying integrated eliminating the forces from shearing.
- Resistor with cutting oil by suitable nanomaterials of sealing.
- Model CHL incorporates out of standard a magnetic element.
- The detectors of position fit in the grooves of the body of cylinder.
Applications:
- Machine tools. Function of clamping, tightening, blocking, indexing.
- Perfectly adapted to the applications of cyclings to definite time.
|
|
- Mill type design for applications even under extreme conditions
- Service-friendly modular system
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry
|
|
- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry
|
|
|
|
