Brakes

Torque: 100,000 Nm - 29,100,000 Nm

Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...

Torque: 120,000 Nm - 7,000,000 Nm

Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...

Torque: 15,000 Nm - 11,545,000 Nm

... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...

Torque: 0.23 Nm - 9 Nm
Rotational speed: 4,500 rpm - 10,500 rpm

... overexcitation and power reduction. The ROBA®-servostop® Cobot is a closed-circuit, electromagnetic safety brake. When the brake is applied, a rotor disc with friction lining pads is ...

Torque: 1.5 Nm - 100 Nm
Rotational speed: 3,000 rpm - 20,000 rpm

... A-bearing side and the B-bearing side of servomotors. The ROBA®-servostop® is a closed-circuit, electromagnetic safety brake. When the brake is closed, the rotor is held between the armature disk ...

Torque: 0.31 Nm - 11.5 Nm
Rotational speed: 4,500 rpm - 21,000 rpm

... spring-applied safety brake for servomotors ✓ Slim design ✓ High power density ✓ Low energy consumption ✓ Simple assembly Slim brake for installation both in the A-bearing side and in the B-bearing ...

Torque: 1.3 Nm - 4,166 Nm

... available on the market; the torque of the Extreme pneumatic brake is constant, stable and linear over time also varying the working temperature. Thanks to all these features, Extreme pneumatic brake ...

Torque: 1.2 Nm - 330 Nm
Rotational speed: 1,200 rpm - 3,000 rpm
Power: 700 W - 12,600 W

Combiflex pneumatic brakes, since 1974, have been representing the benchmark for the converting industry and most of all for corrugated machines. Mounted on the roll stand unwinders, they represent the best solution to ...

Torque: 2 Nm - 5 Nm
Rotational speed: 40 rpm - 2,000 rpm
Power: 75, 24, 70 W

... produces a wide range of electromagnetic powder brakes for converting industry. The experience gained during years, thousands of applications, the constant research into materials and the studies carried out on brakes ...

Torque: 0.2 Nm - 5 Nm
Rotational speed: 40 rpm - 3,000 rpm
Power: 15 W - 50 W

Electromagnetic particle output shaft brakes MEROBEL’s EMP output shaft Brakes are compact and very easy to use for applying a variable torque to a rotational system. MEROBEL’s EMP FAS – FRAS series ...

Torque: 2 Nm - 1,000 Nm

The most popular range of MEROBEL’s electric Brakes, offering tailored solutions with 10 sizes covering a range from 2Nm up to 1000Nm (nominal torque values). With 5 different versions referring to cooling options ...

Torque: 225 Nm - 620 Nm

The SB Series brake provides superior performance in an extremely compact package. Unlike conventional brakes offered today, the SB brake is performance-matched to fit the full range ...

Torque: 100,000 Nm - 29,910,000 Nm
Braking force: 1,110 N - 52,920 N

Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...

Torque: 120,000 Nm - 7,000,000 Nm
Rotational speed: 700 rpm - 5,000 rpm

Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...

Torque: 15,000 Nm - 11,545,000 Nm

... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...

Torque: 0.5 Nm - 0.7 Nm
Braking force: 300 N

... application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is only recommended to use the brake only as a holding brake and not as an emergency ...

Torque: 1.5, 0.5 Nm

Electronic brake for all NEMA23 motors The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake ...

Torque: 1.7, 4 Nm

... vertical linear application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not ...

Torque: 0.2 Nm

Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...

Torque: 0.4 Nm

This power-on brake is available on request for batches above 500 pieces.

Torque: 1 Nm

Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...

Torque: 0.06 Nm - 3.2 Nm
Rotational speed: 6,000 rpm

... extremely compact design in combination with a constant torque to the sister model BXW. This performance was achieved by new friction lining and excitation technology. - High reliability - Ultra-thin design - Low ...

Torque: 5 Nm - 320 Nm
Rotational speed: 2,000 rpm - 8,000 rpm

Due to the excellent responsiveness it is possible to realize fast switching processes. The optimal installation form can be selected from the three types of armature assemblies with different shapes. - Different armature options - ...

Torque: 5 Nm - 55 Nm
Rotational speed: 3,600, 5,000 rpm

The BXR model is an emergency and holding brake. Its main feature is the slim design, which makes it a perfect solution in confined spaces. The main applications are in robotics and in servo drives. - High reliability - ...

Torque: 0.018 Nm - 56.5 Nm

Product Description Hysteresis Brake Dynamometers (HD Series) are versatile and ideal for testing in the low to medium power range (maximum 14 kW intermittent duty). With a Hysteresis Braking system, the Dynamometers ...

Torque: 6.5 Nm - 28 Nm

... readouts and software. As with all Magtrol Hysteresis Dynamometers, engine loading is provided by Magtrol’s Hysteresis Brake, which provides: torque independent of speed, including full load at 0 rpm; excellent repeatability; ...

Torque: 0.3 Nm - 560 Nm

Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as ...

Agility and efficiency in a modern form New industrial brake series from RINGSPANN sets standards in design and number of switching operations The electromagnetic disc brakes of the RINGSPANN series ...

Braking force: 0 kN - 190 kN

spring activated – hydraulically released Features - Code Brake Caliper - H Standard - W Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction block wear - M

Braking force: 0 kN - 270 kN

spring activated – hydraulically released Features - Code Brake Caliper - H Floating caliper - S Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction block ...

Torque: 1.5 Nm - 600 Nm
Rotational speed: 3,000 rpm - 6,000 rpm

... unique system developed by INTORQ, brakes can be assembled to fit almost any task. You benefit from the wide variety of options, fast project planning and rapid delivery. further explanation: INTORQ BFK458 Double-brake - ...

Torque: 0.24 Nm - 4 Nm
Power: 5.2 W - 12.4 W

Spring-applied brake INTORQ BFK551 Wherever there is only a very limited installation space available and a powerful brake is still required, we are sure to be “new fans”. Developed from the requirements ...

Torque: 0.27 Nm - 8 Nm
Rotational speed: 5,000, 4,000, 6,000, 3,000, 2,500 rpm
Power: 5.8 W - 27.2 W

... electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected. For ...

Torque: 400,000 Nm

“Low-speed” brake.Caliper safety disc brake direct acting at the board disc of a rope drum.Load crash security and protection ( also reacting in case of gear shaft fracture). Direct-acting / Without ...

Torque: 200 Nm - 23,800 Nm

DISC BRAKE TYPE RSTN / SERVICE BRAKE About the product “Fast speed” brake Torque adjustable For brake disc ø 250 mm to ø 1250 mm With “SLM” synchro-lifting-mechanism ...

Torque: 0 Nm - 10,000 Nm

... between brake lining and brake drum) Optimal when using an automatic wear adjustment (AVN) Optionen Mechanical limit switch protection “Brake open”, “Brake close”, ...

Torque: 0.3 Nm - 2 Nm
Power: 6 W - 15 W

... closed-current spring-applied brakes. This brake solution is characterised by a particularly compact construction, and is designed for small loads. The type 08 can be used as a service brake ...

Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W

... current spring-applied brake, and is used in applications with tough ambient conditions around the world. The standard brake conforms to protection class IP66, with hand-release IP65. The brake ...

Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W

... current spring-applied brake. It has been manufactured by KEB for over 50 years and is used throughout the world in a wide range of applications. The brake can be used both as a service brake ...

Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 5 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00

Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 6.6 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather

Torque: 0.1 Nm
Rotational speed: 5,000 rpm
Power: 9 W

FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather

Modular rotor lock for on- and off-shore wind power plants Locking cylinder to fix rotors of large off-shore wind power plants for maintenance work.

Torque: 0 ft.lb - 30,000 ft.lb
Braking force: 57.6 kN

The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications ...

Torque: 0 ft.lb - 1,600 ft.lb
Braking force: 4,226 N

The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied ...

Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,234 N

The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring ...

Torque: 14, 29, 75, 600 Nm

... Our pneumatic brakes can be combined with all our air motors. The combination of motor with brake is widely used for winches, cranes and positioning devices. All brakes are built ...

The Nexen Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent back driving ...

Torque: 4 Nm - 1,600 Nm

... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...

Torque: 4 Nm - 500 Nm

... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...

Torque: 4 Nm - 1,600 Nm

HIGH LEVEL OF SAFETY Safety considerations have required designing a braking mechanism with dual safety circuit, also 2H2SP series meet strict safety regulations related to elevator design and installation defined in EN 81-1+A3:2009 ...