|
|
|
|
|
|
The Series 10 SCU facilitates hydraulic fluid flow like no other unit on the market. Offering an unprecedented, continuous pressure rating of 275 bar (4000 psi). Its robust design, balanced architecture and many options, offer increased performance during transient pressure and high standby conditions. Optional features such as Wide Angle and Cylinder Damping help provide the smoothest steering available for articulated vehicles. Eaton also offers Two-Speed Steering to combine improved roading performance with high efficiency in the work cycle while accommodating European regulations for emergency manual steering capability. Other technologies, such as STC® direct ports, Q-Amp, VersaSteer™ (dual "metered" and "quick" steering modes), result in an improved steering experience and reduce system cost.
Applications
- Mobile construction equipment including wheel loaders, telescoping handlers, and rough terrain lift trucks
- Agriculture equipment including tractors, combines, and sprayers
- Material handling equipment
- Forestry equipment
- Marine
Specifications:
- Open Center, Closed Center, and Load Sensing Configurations
- Displacement: 60-739 cm3/r (3.6-45.1 in3/rev)
- Flow: 3.8-45 or 8.0-76 l/min (1-16 or 2-20 GPM)
- Pressure maximum: 275 Bar (4000 psi).
|
|
The Series 5 steering control unit (SCU) features a compact design and installation flexibility for low flow applications off-highway applications. These units offer a variety of choices in mounting, ports (now available with Snap-To-Connect, STC® direct ports), port locations, configurations and integral valve functionality. Eaton's patented balanced architecture reduces steering drift and provides smooth, best-in-class steering feel and crisp centering. Series 5 SCUs are affordably designed for low flow, low pressure applications and are more efficient with lower pressure drop than competitive units.
Applications
- Lawn, garden and turf equipment
- Lift trucks
- Golf course maintenance equipment
- Compact utility tractors
Specifications
- Open Center, Closed Center, and Load Sensing Configurations
- Displacement: 31.5-120 cm3/r (1.92-7.33 in3/rev)
- Flow: 11-19 l/min (3-5 GPM)
- Pressure maximum: 140 Bar (2030 psi).
|
|
|
Within the mechatronics line Iskra Avtoelektrika manufactures DC motors for driving different types of power assisted steering systems. Electric motor drives are designed on the basis of commutator or brushless electronically commutated motors with permanent magnets.
|
|
LAG steering units are used in the hydraulic steering circuits of motor vehicles and mobile machines with high axle loads and driving speeds of up to 50 km/h (60 km/h in Germany).
Even heavy vehicles can be easily steered. The absence of a mechanical connection between the steering unit and the steering axle allows the implementation of solutions that would not be feasible with conventional steering systems.
Includes all valves that are required in the hydraulic steering circuit for the protection of the steering unit and cylinder. No need for additional piping.
If the oil supply fails, the LAG can be used to steer manually - emergency steering capability. The LAG then functions as a handpump to the steering cylinder.
|
|
|
High Precision for tractors, light lorries, 4 wheel drive cars, and practically for any kind of vehicle. They are perfect in town, country side, twisting roads, for helping wen handing and absorbing surface irregularities
|
|
SeaStar Power Assist steering brings automotive-type steering comfort and control to powerboats. The addition of a Power Assist unit will greatly reduce steering effort and enhance the boating experience for everyone.
The SeaStar Power Assist steering unit is designed for use with SeaStar manual hydraulic steering systems and is suited for all heavy / high torque steering applications.
FEATURES
• Dramatically reduces wheel torque
• Easy to install
• Simple ‘add on’ to an existing SeaStar manual system (optimal performance achieved when used with SeaStar 1.4 - 2.0 pumps)
• OEM or Retro fit
• Compatible with power purge system
• Reverts to manual mode in the case of power loss.
• Suitable for use with autopilots
• 12v or 24v operation
• Wall or floor mounted
• Wiring harness, and mounting bracket included
• Ignition protected (SAE J-1171)
• ABYC, CE, NMMA, ISO 10592 Approved
|
|
|
|
|
|
Sauer-Danfoss offers component and system level steering solutions. Our product range makes it possible to cover applications of all types, ranging from ordinary 2-wheel steering (also known as Ackermann steering) to articulated steering, complicated 4-wheel steering, automatic steering (by sensor) and remote controlled steering via satellite.
For light vehicles such as garden tractors, municipal vehicles, lawn mowers or small forklift trucks, Sauer-Danfoss offers OSPM hydrostatic steering units.
Small and medium sized vehicles can be equipped with an OSPB, OSPC, OSPF or OSPR steering unit. Typical applications include tractors, harvesters, forklift trucks and small construction machines.
Larger vehicles such as combines, loaders and dump trucks will typically use OSPB, OSPC or OSPF steering units. The OSPL steering unit is particularly suitable for where the steering flow can reach 100 l/min (26 gpm). However, for vehicles of that size, Sauer-Danfoss has specifically designed the OSPQ and OSPD. These steering units are designed with variable displacement to make emergency steering possible on even heavy machines. The unit change automatically to the lowest displacement when pump oil supply is unavailable.
|
|
LAG steering units are used in the hydraulic steering circuits of motor vehicles and mobile machines with high axle loads and driving speeds of up to 50 km/h (60 km/h in Germany).
Even heavy vehicles can be easily steered. The absence of a mechanical connection between the steering unit and the steering axle allows the implementation of solutions that would not be feasible with conventional steering systems.
Includes all valves that are required in the hydraulic steering circuit for the protection of the steering unit and cylinder. No need for additional piping.
If the oil supply fails, the LAG can be used to steer manually - emergency steering capability. The LAG then functions as a handpump to the steering cylinder.
|
|
| ... products without technical information |
| |
WE MANUFACTURE:
GEARBOX FOR GAS AND STEAM TURBINES, TYPE CAV
MULTIPLIER FOR KAPLAN TURBINE, TYPE SC
|
|
| ... products without technical information |
| |
|
Model 5200 is a Single-Channel PXI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is ArbConnection software, which is used for controlling the 5200 and for generating, editing and downloading waveforms from a remote computer.
|
|
|
|
|
|
Foster-Miller%u2019s CECIL® articulated robots were developed in the late 1980s under contract to the Electric Power Research Institute, Consolidated Edison and Public Service Electric & Gas to provide nuclear environment robotic inspection and cleaning capability within the tube bundle of steam generators used in nuclear power plants.
Using a flexible lance, the teleoperated robot allows access to remote steam generator locations. It uses 10,000 psi water jets to remove hard and soft sludge deposits while the operator remotely controls the operation via video feedback. The robot is installed through an inspection handhole in the generator and moves throughout the lower region of the tube bundle.
CECIL® articulated robots provide nuclear environment robotic visual inspection tools, contaminant sampling and foreign object retrieval in addition to cleaning. All operations are controlled remotely. CECIL® robots are designed to be operated in restricted high radiation environments by personnel in protective clothing.
Systems have been delivered and are currently used in nuclear plants in Japan, Korea, France and Canada as well as in the United States. We team with Westinghouse to provide CECIL® robot services to domestic nuclear utilities.
|
|
Ref.ON
B8-74D
B8-85D
B8-85D
B8-23D
B8-79D
B8-79D
B10-46D
6000TT
62000-2RS
B10-50D
B10-50D
B10-50D
B10-50D
6201-2RS
214
6301-2RS
B12-40D
B12-53D
366
6202-2RS
6202TT
279
B15-69
B15-69
SC0299ZLU
348
B15-85D
319
B15-45D
336
336
B15-86D
B15-83D
6302-2RS
EC6302-2RS
382-2RS
6302-2RS
6203TT
6303-2RS
B17-107D
303WPP
B17-52D
333
B17-99D
B17-116D
|
|
This paper will focus specifically on Synopsys EDA software tools, process flows, and compute resources
used for the “Mask Data Preparation (or MDP)” process flow area of semiconductor manufacturing.
(Synopsys product; CATS®). Often referred to as the critical link from design to manufacturing CATS is a
software package which converts semiconductor design data into a useful format for making the circuit
templates (also referred to as “photomasks”) for semiconductor manufacturing. Topics discussed will include
|
|
This paper will focus specifically on Synopsys EDA software tools, process flows, and compute resources
used for the “Mask Data Preparation (or MDP)” process flow area of semiconductor manufacturing.
(Synopsys product; CATS®). Often referred to as the critical link from design to manufacturing CATS is a
software package which converts semiconductor design data into a useful format for making the circuit
templates (also referred to as “photomasks”) for semiconductor manufacturing. Topics discussed will include
|
|
AvK RANGE : VOLTAGE REGULATORS
AvK Voltage Regulator COSIMAT N+
One particular advantage of AvK Automatic Voltage Regulators (AVR) is the variety of regulating features which is unachieved by other manufacturers.
The basic design of the voltage regulator COSIMAT N+ meets all usual requirements such as:
* High voltage accuracy under all operating conditions
* Stable operating performance during parallel operation
* Underspeed protection
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
The PGC 4.5 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic components, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
|
|
9130 series
An Unsurpassed RH Control of ±0.5%
The PGC 30 cu. ft. chamber features our unique humidity control system that enables the user to attain unsurpassed levels of relative humidity/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor tranmission.
The interior chamber is constructed of very durable, corrosion resistant 316 stainless stell. Low watt density heaters are used that also contribute to the unit's longer life.
Should your application require it, the chamber air flow can be factory-configured from the standard horizontal flow to vertical. Other options include extended ranges, chart recorders, a window in the outer door, and a clean inner door with optional iris opening.
|
|
|
|
|
|
The PGC 7000 series chambers feature our unique humidity control system that enables the user to attain unsurpassed levels of RH/temperature control and uniformity.
These test chambers are designed to accurately produce those temperature and humidity conditions required for applications such as stability studies, package testing, TAPPI, MIL-SPEC, and vapor transmission.
Applications are found in such diverse industries as pharmaceutical development and manufacturing, electronic omponents, food, semiconductor, paper and pulp, and wherever precise humidity and temperature replications are required.
Additionally, PGC’s SmartPad microprocessor controller is a user-friendly system that provides optimum accuracy and control. The SmartPad is equipped with direct readings in both temperature and humidity. It also features 40-segment programming for automatic cycling and ramping and soaking excursions. High-low or deviation alarms as well as digital communications ports are standard features.
The interior chamber is constructed of very durable, corrosion resistant stainless steel. Low watt density heaters are used that also contribute to the unit’s longer life.
Should your application require it, the chamber airflow can be factory configured from the standard horizontal flow to vertical. Other options include extended ranges, chart recorders, a window in the outer door, and a clear inner door with optional iris opening. System includes free logging software.
|
|
Parameter Generation and Control (PGC) manufactures pharmaceutical stability rooms and chambers for the storage of products that require environmental conditions that must adhere to ICH guidelines.
We offer a complete stability package:
- We manufacture your room or chamber to operate at any ICH condition including: 25°C/60% RH, 30°C/75% RH, 30°C/65% RH, 40°C/75% RH, and 5°.
- Complete installation on site anywhere in the world.
- Validation packages (IQ, OQ, PQ) utilizing state of the art mapping systems.
- 21 CFR part 11 compliant monitoring systems.
-Calibration and PM contracts.
|
|
|
|
|
|
TAPPI Rooms
AN UNSURPASSED RH CONTROL OF ±0.5%
TAPPI Room PDF Parameter Generation and Control (PGC) manufactures TAPPI room systems and conditioners for existing laboratories. These systems provide the precise temperature and humidity control required by TAPPI T402 om-88.
We offer a complete package:
We manufacture your room or chamber to operate at both the TAPPI and TAPPI preconditioning specification. System can automatically cycle between the two conditions.
Complete installation on site anywhere in the world.
On-site start-up instruction.
PC based monitoring systems comes standard with each unit. System monitors temperature, relative humidity, saturator, and mechanical outputs.
Calibration and PM contracts.
Extremely precise control and uniformity within the room or chamber allows for the customer to easily validate at the targeted position.
Our unique dew point control systems utilize much less energy than other stability control systems.
Our systems do not utilize maintenance intensive boilers and steam injectors that require high purity water.
|
|
|
|
|
|
PGC has been providing high quality walk-in chambers since the mid-1970's. These environmental chambers have applications in diverse disciplines such as pharmaceutical stability testing, TAPPI and ASTM testing, biological and biotechnological research, electronics, and many other applications.
Our many years of experience in designing, manufacturing and installing walk-in rooms enable us to provide the user with unparalleled expertise. PGC's staff will assist in planning your room to meet your specific needs.
PGC will provide sole-source responsibility for both room construction and its conditioning equipment. Using modular insulated panels having either a 32 Rvalue (four inch) or a 40 R-value (five inch), enables PGC to deliver maximum efficiencies and uniformities.
FEATURES:
- RH uniformity to ±0.5%
- Temperature uniformity to ±0.5°C
- Multi-range rooms from -30°C to +60°C
- Humidity ranges from 10% to 90% RH
- Modular insulated panels
- Rooms factory-tested prior to
- shipment
BENEFITS:
- Unsurpassed humidity performance
- Superb temperature stability
- Flexibility of operation
- Increased measurement options
- Ease of assembly
- Assurance of proper operation
|
|
|
The 100 to 200 CFM unit is our smallest conditioner and is conveniently designed to run on a 15 amp 115 volt power source. This unit does not require compressed air or ultra pure water (tap water is generally fine). The interior and exterior are constructed of corrosion-resistant stainless steel. Low watt density heaters also contribute to the unit's durability.
|
|
PGC's humidity generating systems are unique. The sources for humidity, dehumidification, heating, cooling, and circulation are all packaged in one self-contained unit. This unit is specifically designed to provide 500-1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature control.
Since this generating unit is selfcontained, it can be easily used to condition existing spaces, small walkin rooms, and custom chambers. The conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply
|
|
Advanced Gas, Steam and Hydro turbines
A comprehensive range of turbines for all applications, from industrial power generation up to the largest power plants in the world
Alstom's turbine range includes advanced gas, steam and hydro turbines for power generation, mechanical drives and propulsion systems. Our global capabilities also include service, maintenance, refurbishment and upgrading of turbine plants and training of personnel.
-gas turbines from 56 MW up to 288 MW for turnkey power plants including simple cycle, combined cycle, repowering and retrofit
-steam turbines from 100 MW up to 1200 MW for fossil steam turbines and up to 1800MW for nuclear steam turbines
-steam turbine retrofits
-hydro turbines for all types of hydropower plants; high or low head, storage and run-of-the-river
-hydraulic and pump turbines up to 900 MW
|
|
A comprehensive range of turbines for all applications, from industrial power generation up to the largest power plants in the world
Alstom's turbine range includes advanced gas, steam and hydro turbines for power generation, mechanical drives and propulsion systems. Our global capabilities also include service, maintenance, refurbishment and upgrading of turbine plants and training of personnel.
-gas turbines from 56 MW up to 288 MW for turnkey power plants including simple cycle, combined cycle, repowering and retrofit
-steam turbines from 100 MW up to 1200 MW for fossil steam turbines and up to 1800MW for nuclear steam turbines
-steam turbine retrofits
-hydro turbines for all types of hydropower plants; high or low head, storage and run-of-the-river
-hydraulic and pump turbines up to 900 MW
|
|
... see all the products in the category
Turbines
|
The textile conditioning unit is specifically designed to rapidly bring textile samples to the standard condition of 21°C and 65% RH.
Depending on the weight of the sample, this system will bring samples to equilibrium within 1 to 3 minutes.
PGC’s humidity generating systems are unique. By utilizing the “two temperature” method of control, PGC is able to create an unrivaled stable environment (see chart below).
PGC considers all three parameters necessary for attaining a specific specification (control constancy, chamber uniformity, sensor accuracy), thus providing the specified tolerance of ±1°C and ±2% RH is truly attainable. Most of our competition will control to ±2% RH, but sensor accuracy and chamber uniformity must be added to this figure.
|
|
 see the results for the following category : UPSs |
|
|
