|
|
Threadless hose fittings that are a patented, innovative alternative to conventional threaded fitting. WEO Plug-In fittings simply “plug in” to hydraulic systems. A click-to-connect feature provides easy engagement of the male and female halves, without the tools required to connect and disconnect threaded fittings. Other benefits include:
· Leak-free connections.
· No follow-up tightening.
· Minimum space needed. A cartridge insert, designed to drop into the port or valve manifold, allows further reduction in space required for hose assemblies.
· Work injuries eliminated.
· Longer hose life—WEO fittings are self-aligning.
· Easy to service.
· Lower overall cost—Elimination of leakage, improved accessibility, and reduced installation time make WEO fittings lower in overall cost than threaded fittings.
|
|
Threadless hydraulic couplings: Quick - Easy - Leak-free - Safe - Compact
Gates Quick-Lok™ quick to connect and disconnect couplings for hydraulic pressure lines up to 280 bar.
Key benefits:
- Reduces the connection time
- Reduces the need for line side tooling
- Eliminates threads and torque requirements
- Provides a leak-free connection
- Ensures correct fitting every time
- Eliminates re-work at the end of the production line
- Reduces/eliminates warranty claims
|
|
To complement the Pipestoppers™ range of nylon expanding plugs, we offer all sizes of aluminium plugs.
These are provided in sizes from 1.5" upwards and are suitable for more arduous duties such as immersion in chemicals and/or higher temperatures. They are manufactured with 1/2", 1" and 2" outlets.
1/2" Outlet for plugs sizes up to 6"
1" Outlet for plugs sizes 6" to 18"
2" Outlet for plug sizes of 20" and greater
The standard seals are made from natural rubber and special rubber seals are available for chemical applications where greater resistance is required.
(alternative rubber rings options are: Silicone, Nitrile & Viton)
All plugs conform to British Standards BS8005 for low pressure testing and sealing of pipes.
The basic principle - effective sealing is simple, insert the plug into a pipe opening and tighten the wing nut clockwise. The rubber ring will expand and provide a positive seal. To remove simply reverse the process.
Tightening the wing nut is easy with the Pipestoppers™ patented friction free washer.
Typical applications:
Are used for plumbing operations in a wide variety of industries, including domestic and industrial water and drainage systems.
Also for ducting and conduit, swimming pools, masking in painting and casting industries, as weld purge plugs for stainless steel pipework fabrication and many others.
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double aluminium plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon expanding plugs, aluminium plugs, steel drain plugs and inflatable stoppers, we offer double steel plugs for increased stability and higher pressure duties.
The test pressure capability of the single stoppers is limited and the double versions increase that capability, while offering a greater stability in the pipe.
As single plugs approach their pressure limits, they can tend to tip over like a butterfly valve. The double plugs will prevent the tipping and guarantee the seal.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
NYLON PLUGS from 0.5" (12mm) through to 6" (150mm)
Pipestoppers™ Nylon plugs are used internationally as the standard 'Drain Plugs' for testing leak tightness of foul water lines at the time of installation.
Furthermore, the range of sizes make these plugs ideal for a number of other applications in the water and gas industries as well as applications in all other industries where pipes are used or where there are holes to be blocked.
Testing and sealing of all pipes, pipe joints and pipe work assemblies can be done with the Pipestoppers plugs. They can be supplied with a hollow shaft version for screwing on standard hose connections or for using our own fixed nipple caps or the free nipple and cap assemblies that we manufacture.
Or for the smaller sizes, they can be supplied with solid shafts for greater pressure testing capabilities.
Other applications include: Sealing holes in castings, tanks, other assemblies for spraying and blasting to protect the insides. Maintenance and installation of swimming pool and water spa pipework.
Nylon 6 is an engineered polymer which is resistant to salt water corrosion it is also resistant to many other chemicals. Along with natural rubber rings they provide a high quality leak tight seal in the selected orifice.
There are two types:
- A solid shaft version with five sizes from 0.5" (12mm) up to 1.5" (38mm) and
- A hollow shaft version with eleven sizes from 0.5" to 6" inclusive.
All plugs have:
A central spindle/shaft on which two plates are fitted with a natural rubber tyre (ring) between them, a wing nut on the shaft moving the two plates together compressing the tire and making the seal in the pipe or orifice. Natural rubber tyres which can be substituted for different rubbers where additional chemical and/or heat resistance is required. Alternative rubber rings options are: Silicone, Nitrile & Viton)
The hollow shaft version with sizes from 0.5 inch to 6 inches allows:
Water or gas to be injected or drained as required.
Sizes of 1.5 inch and above are threaded with a half inch BSP for the connection of standard nuts/hose fittings is provided with a solid end cap seal are fully demountable for cleaning and parts replacement.
Optional end caps are available with fixed nipples/nozzles for hose connection or free nipples which can rotate when heavier hoses are used.
|
|
For pressure testing and stopping all pipework from 50mm (2") upwards.
To complete the Pipestoppers™ range of nylon and aluminium expanding plugs, we offer all sizes of steel expanding plugs.
These are provided in sizes from 2", for more arduous duties such as long immersion in water and higher temperature.
The plugs are merely inserted into the pipe and the wings tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.
They are manufactured with 0.5", 1" and 2" outlets.
The standard seals are made from natural rubber and special rubber seals are available for chemical applications, where greater resistance is required.
All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.
|
|
SchuF invented the Lift Plug Valve in 1914. Since then, it has delivered plug valves to the Chemical, Refinery, Delayed Coking, Polymer, Cement, Mining and Power industries.
Lift Plug valves as suitable for a variety of applications such as isolation, or switching where the medium is highly abrasive, or operating conditions are severe - such as very high temperatures.
SchuF produces a special range of lift plug valves for the coking industry - the IsoPlug and SwitchPlug range.
|
|
Rising-plug style valve for process instrumentation applications. Provides users with a highly reliable valve solution for applications where contaminated media can lead to premature valve failure.
The rising plug valve's ‘straight-through’ design supports higher flow rates than needle valves, helping to avoid the build-up of deposits.
The HRPV Series valve features an 8-turn actuation cycle, with a rolled spindle thread and smaller sealing area - lowering the torque required when controlling high pressure fluid flows and providing a long life. It’s rated to 10,000 PSI (689 bar) - a typical actuation torque of just 25 pound-inches (2.82 Nm) of torque is required.
Two types of body are available: inline 2-port design, and an inline design with a standard 3-port gauge interface at one end. In its smallest 1/4 inch female NPT version, the overall body length of the compact valve measures just 60.5 mm.
As standard, the valve is provided with PEEK seats, which allows the valve to operate up to 200+ degrees C, and resists wear and damage from the kind of aggressive media encountered in oil and gas processing environments.
Fabricated from 316 stainless steel as standard, HRPV Series valves can optionally be specified in a wide range of exotic alloys.
|
|
Grind stock is provided on the FEMALE interlock surface. To
register the interlock on the tapered surfaces, stock must be
ground from the front face of the female until there is a slight
clearnace between the faces of the male and female when
assembled. PRECISION FITTING of interlocks requires grinding
the necessary amount of stock from the female face to
obtain contact on tapered surfaces AND male and female faces
simultaneously.
|
|
|
The conical centraggi are mechanical members who allow to the precise centratura of slabs of the stamp or others members been involved in the transformation process.
|
|
Magnetic piston is included as standard.
Rugged body is machined from aluminum extrusion and mounts rigidly to equipment in a minimum of space.
A variety of styles are offered to meet different application requirements.
The direction of rollers are adjustable for use in different applications.
Shock absorbers are available as safety stops.
Magnetic sensors can be mounted on cylinder surfaces when input signals are required for controllers.
|
|
Stopper Cylinders
EF1 Cylinder was modified for a conveyor stopping application.
Featuring a heavy-duty mounting, the cylinder's rod/bearing design was developed to withstand side impact loading.
Stroke lengths: 15, 20, 25mm.
Max Side Load: 12, 11, 10lb.
|
|
| ... products without technical information |
| |
Micronic offers a comprehensive range of capping solutions to ensure the integrity of your valuable stored samples. Capping products
are available in a range of different sample tube sizes, formats (to cap 1, 8, 12 or 96 tubes) and polymeric materials to meet almost any storage
requirement. Each TPE capping product is multi-piercable reducing the chances of sample cross contamination. As an option split septum
caps are available to reduce the piercing force required by needles and pipette tips.
|
|
... see all the products in the category
Labware
|
The series includes general machine components such as "Stopper bolt", "Ball plunger" and "Spring plunger".
METROL has developed the totally new devices having 2 functions by installing high-precision switches inside the components.
The number of components are reduced because this product plays 2 roles in machines.
The products in this series can contribute machine downsizing and cost saving.
|
|
The series includes general machine components such as "Stopper bolt", "Ball plunger" and "Spring plunger".
METROL has developed the totally new devices having 2 functions by installing high-precision switches inside the components.
The number of components are reduced because this product plays 2 roles in machines.
The products in this series can contribute machine downsizing and cost saving.
|
|
Very Low Profile PCB Jack(Side Entry)
Materials
Housing: PBT+30% glass-fiber UL94V-0 Black
Contacts: 0.35mm thickness alloy, gold plating over nickel in contact area
Tin Plating over nickel in solder area
|
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
Absopulse Electronics offers a line of plug-in (Eurocard) DC/DC converters designed for railway and other harsh-environments. These units utilize field-proven topology to deliver any DC output up to 130Vdc. They can typically be operated from supply voltages of 24Vdc ((14.4–37V), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). Other inputs are available on request.
Absopulse’s line of plug-in (Eurocard) railway converters are designed to meet the requirements of EN 50155 for electronic equipment used on railway rolling stock. They also meet EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). The plug-in (Eurocard) series is rated for operation over a -25 to +70oC temperature range without derating, with natural convection cooling. Features typically include full electronic protection on the input and output, optocoupler, optional alarm output and optional control input. An optional built-in redundancy diode to allow for parallel connection to achieve higher output power or N+1 redundancy is available on most designs.
These compact plug-in modules are typically used in 19” rack-mount applications. They are heavily ruggedized and conformal coated and designed to meet IEC 61373 Categories 1 A & B shock and vibration standards.
Absopulse Electronics provides an extensive range of power supplies for operation in railway, industrial and other extreme environments in encapsulated or vented, chassis mount packages. If our standard designs do not meet your requirements, our engineering team will provide a cost-effective solution to meet your exact specifica | | |
