|
|
|
Global Manufacturer of Quick Release - Quick Disconnect - Quick Connect Hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or Pneumatic fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite.
|
|
|
Global Manufacturer of Quick Release - Quick Disconnect Hose Couplings in General Purpose Poppet and Dry Break - Non Spill (Flat/Flush Face) styles for virtually any Hydraulic or fluid application. Many styles available from ISO Interchange designs to subsea, panel mount, screw to connect, connect under pressure, and many specialty designs are available from Snap-tite.
|
|
99 KL series
With the 99 KL series, both the coupling as well as the plug are filled with a dry-break valve system. During the connection process, the plug and the coupling seals before both valves open. The valves close simultaneously when disconnected, allowing the coupling and plug to be seperated afterward. This ensures minimum leakage. It cannot be connected with any other design in this series. All invidual parts are electro-burnished.
Advantages
Coded via two lateral grooves on the plug and a similar guide in the coupling, which are arranged in different angular degrees. The 8-way coding is standard.
Applications
Mechanical engineerring, plant machinery, chemistry
|
|
- to ISO 8434-4
- high level of safety under extreme conditions, e.g. in cases of severe vibration, violent pressure surges and extreme changes of temperature.
- many configurations
|
|
|
Suitable for both plastic and rubber hoses. Excellent chemical resistance. Applicable for industry, laboratory and domestic use. Lightweight, unbreakable and insulating. Made out of strong POM.
|
|
At Gates, innovation is all in a day’s work. Take our new TuffCoat™ hydraulic coupling coating. It not only raised the bar on corrosion resistance; it set the standard. But don’t just take our word for it. Here’s what scientific testing had to say: tested under ISO 9227 and ASTMB117 salt-spray conditions, our revolutionary TuffCoat™ coating provided 400 hours of protection against corrosion. That’s a 400-plus percent improvement over the 96-hour ISO standard!
The TuffCoat™ conversion will affect all Gates manufactured couplings. There’s no need to return your existing inventory, though. Just continue using your original couplings. They’ll provide the same superior performance you’ve come to know and expect from Gates. Gates’ revolutionary TuffCoat™ coating: setting the standard for corrosion resistance.
|
|
Manually operated multicouplings
WALTHER-PRAEZISION offers different designs of manually operated multicouplings for the simultaneous connection of several fluidic, pneumatic and electrical lines. Due to the fixed arrangement of the coupling elements mistakes are excluded and the duration of the coupling procedure is enormously shortened. Multicouplings are used therefore there, where automatized operating procedures during manufacturing, testing, actuating and controlling are requested.
|
|
TIF10000 Series
The IF series plug profile is produced according to ISOnorm 16028 and is compatiblewith other makes of the samenorm. These couplings offer an absolutely dry break %u2013no oil loss during uncoupling. Thanks to the valve construction, the coupling has a minimum pressure drop, and thusachieves maximum costeffectiveness.
Advantages
The coupling can be operatedwith one hand and is equip ped with a safety lockingdevice to prevent unintentional uncoupling. With thepatented pressure eliminatorit is possible to establish acoupling under static pressureuntil working pressure.
Applications
Automotive, elevating mechanism, materials-handlingtechnology, building machinery, agricultural machinery, chemical industries, industrialplant.
|
|
48 KB series
The 48 series coupling system made of POM and PVDF has been developed for use in the medical, chemical, food handling, pharmaceutical and laboratory technology industries. The coupling is also available in a completely thermoplastic version (RectuChem ). Here the metal springs are replaced by springs made of PEEK, an extremely resistant synthetic material.
Advantages
The coupling is fitted with a double shut-off valve which enables it to be connected to a single shut-off (non-valved) plug as well as a double shut-off (i.e. plug with valve). The coupling is also available as a straight through coupling (valved plug).
Application
Medical engineering, dental equipment, measuring and control equipment, laboratory, pharmaceutical.
Working Pressure : PB = 0 - 10 bar (POM, bei 20°C), PB = 0 - 8 bar (PVDF, springs made of steel), PB = 1 - 8 bar (PVDF, springs made of PEEK), maximum static working pressure with safety factor of 4 to 1.
Working Temperature: -20°C up to 80°C (POM), -20°C up to 120 (PVDF), depending on the medium.
|
|
The proven tube connectors according to DIN 2353 and ISO 8434-1 are suitable for most industrial and mobile hydraulic applications:
* Plastic injection machines
* Machine tools
* Hydraulic presses
* Hydraulic systems engineering
* Construction machines
* Agricultural machines
* Conveyor systems
Complete product range plus quality - as a system supplier, STAUFF supplies one of the most proven and extensive product ranges for tube connecting systems based on this principle - both in steel and stainles steel.
The product range includes:
* Cutting ring couplings
* Taper couplings
* Flared couplings
* Pre-assembly devices
|
|
24 KA series
Durable, single hand quick connect coupling made of brass. The sealed sleeve prevents dirt from reaching the internal parts. The construction is based on the 26 series, which has proven its worth many times over the years and can be used for a multitude of applications.
Advantages: Single hand operation and a multitude of connecting options.
Applications: Air tools, automotive, compressed air, mechanical engineering, compressors.
Working Pressure: PB = 35 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -20°C up to 100°C (Buna N), -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), depending on the medium.
|
|
225 KL series
The 225 KL coupling system was developed for the chemical and beverage industries for filling and draining containers. There is no leakage loss whatsoever during the connecting as well as the disconnecting process. The EPDM seals conform to the FDA regulations.
Advantages
High flow rates, easy to clean, simple to dismantle, moving parts are encapsulated and external to the product flow. The screwed connection allows manual connection even at a pressure of 4 bar.
Applications
Pharmaceutical, food and beverage.
Working Pressure: PB = 16 bar, maximum static working pressure with safety factor of 4 to1.
Working Temperature: -40°C up to 120/150°C (EPDM), -15°C up to 200°C (Viton®), 0°C bis 316°C (Kalrez®) , depending on the medium.
|
|
Description:
Hydraulic flanges high pressure
Advantages:
- In conformity with the standards ISO 6162 -1 and -2 and SAE J518
- More than 60 configurations different of ½ to 5 inches
- Forged Flanges
- Range supplements accessories (screw, seals.)
Applications:
All applications of public works and industrial equipment like the presses, hydraulic power units, pumps, etc
|
|
Flat Faced Couplings
Push to connect couplings
Minimal fluid loss when disconnecting
Minimal air inclusion when connecting
PDF's -FF Series | RW Series | DB Series
Poppet Couplings - (includes popular HK Series)
Available in brass, steel and stainless steel
Suitable for liquids, chemicals, steam gasses, & vacuum
ISO 7241-1 Series A compatible PDF's - H -15000
ISO 7241-1 Series B compatible PDF's - 1-8 HK | 10-20 HK | H - 5000 | UP10
Screw to Connect Couplings
Operates at pressures up to 10,000 PSI
Suitable for hydraulic ram, pump and high impulse applications
Rugged steel construction
PDF's - 96 | WA 56000 / HP 3 | W6000 | W26000 | HYDRAV
Agricultural Couplings
Hydraulic and fluid transfer
ISO 7241-1 Series A compatible PDF's - H-15000
PDF's - K -8000 | Q - 9000 | H - 55000
|
|
The range of hydraulic fittings conforms to English BS (British Standard), American SAE and German DIN (Deutsches Institut fur Normung) norms. Additional items conforming to Japanese norms JIS (Japanese Industrial Standard), French NF and some flanged head fittings for OEM applications are also available.
For braided hose MF2000 range is available with a no-skive or skive assembling technology. For wire spiralled hose MF2000 range is used with external skive of the hose, while, for the highest levels of pressure, the Interlock range is to be used with internal and external skiving.
|
|
Coupler 6600
Description:
Coupler 350 bar - ISO 7241-1 Forme has
Advantages:
- Valve Obturation
- Temperature of -40°C with +110°C
- Treatment without chromium VI
- Connection BSPP "
Applications:
All agricultural applications, of handling, public works and industrial equipment like the hydraulic power units and the tooling
|
|
|
Goodyear is your one source for a wide selection of high-performance hydraulic hose fittings, covering a wide range of designs, shapes, sizes and pressure ratings. With low, medium and high-pressure fittings available for braided, spiral and thermoplastic hose. Fittings include Ultra-Crimp (1-piece), Uni-Crimp (2-piece), Dual-Grip (2-piece) and Field-Grip (reattachable). Our line of 21 thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one source. From Goodyear.
|
|
The Series HA 15000 is a general purpose hydraulic and fluid transfer coupling that conforms to the dimensional requirements of ISO 7241-1 Series A. Body sizes are 1/4", 3/8", 1/2", 3/4" and 1"
Features
Ball lock
Manual connect, disconnect
Poppet valving
Slim Profile
Zinc plated steel contruction
NPTF and BSPP end connections
Available push-to-connect socket designed for bulkhead mounting (1/2" ; body size only)
Standard Materials
Zinc plated steel contruction
Stainless steel springs and balls
Buna-N (Nitrile) seals
|
|
HK Series Plastic Coupling - PDF
Plastic
Pressures up to 110 PSI
1/4"
Suitable for use with air, water, various chemicals at low pressure
ST Series Plastic Couplings
Plastic
Pressures up to 110 PSI
1/4", 3/8"
Suitable for use with Medical equipment, water
P30 / P40 Series Plastic Couplings
Plastic
Pressures up to 150 PSI
1/4", 3/8"
Suitable for use with compressed air
|
|
Simplify your energy connections
with STÄUBLI centralised connections.
Increase your profitability: work with us to define your multi-coupling solution.
FAST
Centralising your energy circuits allows:
- Quick and simultaneous connection of all these circuits,
- Accessibility to all the circuits,
- Increased flexibility of your production processes.
SAFE
All the circuits are connected in a foolproof way.
MODULAR
STÄUBLI offers a large range of standard couplings which can be incorporated into the design for your application.
|
|
Tecnomagnete is pleased to introduce the new Manual Multi Coupling line TC.
TC series is compact to make easier the use even with small molds and light machines.
Moreover TC is perfectly compatible and interchangeable with most of the equipments available on the market.
|
|
Tentube™ Series Couplings (Multiple Line Coupling)
Colder Products’ Tentube™ coupling provides one easy-to-use quick disconnect for up to ten separate fluid lines. The Tentube is available with valves on the body side in panel mount and in-line configurations for maximum design flexibility. The Tentube can connect and disconnect up to ten lines with the use of a simple slide latch. Tubing orientation is ensured by keying the coupling body and insert. Different fluids and tubing sizes can be accommodated by using acetal or polypropylene inserts in three popular sizes.
Colder also offers the TwinTube™ Series Couplings (two separate fluid lines one coupling) and the Sixtube™ Series Couplings (six separate fluid lines on one coupling).
|
|
SMC Series Subminiature Couplings
The SMC Subminiature Coupling is Colder Products’ smallest coupling. This twist-to-connect coupling provides a reliable and more secure alterative to luer-type connections. The SMC also allows the tubing to rotate freely when connected, which prevents both kinked tubing and accidental disconnection during use.
|
|
Automatically operated multicouplings
These couplings are used in case of fully-automatic operation. Coupling movement is done mechanically, pneumatically and hydraulically. Multicouplings in plate mounting can be equipped with different media elements according to requirements.
It is distinguished between:
multicouplings in push-pull technique (see chart)
multicouplings in pull-in technique
multicouplings in push-technique with side entry
special docking systems
|
|
A swivel joint is primarily for use on oscillating shafts, but is also suitable for transfering fluids to and from slowly rotating shafts.
Designs vary from simple knuckle joints, without independant bearings to models containing double row ball bearings for heavier duty.
|
|
|
DSTI's line of SE Series rotary unions are suitable for use in harsh environments. These compact assemblies have a maximum pressure rating of 510 bar, and are suitable for hydraulic oil, air, vacuum & coolant transfer. All of the SE Series rotary unions are available with integrated electrical slip rings for power & data transfer. The slip rings can be protected with a sealed aluminum cover if needed.
|
|
|
Stainless steel double ring fittings and valves. Unions, tees, crosses, elbows, needle valves, regulation valves and check valves
|
|
|
|
