|
|
MID has developed a new variable geometry coupling, which can swivel through 360 degrees: the DynaVariacor®. This internationally patented system provides in particular complete flexibility for use with all types of pneumatic tools and appliances.
The coupling is robust, light and compact; it reduces wear and avoids coiling of the feed hose. This coupling enables increased precision of movement of the tool by reducing the handling force required by the user, due to the relative rigidity of the feed pipes. Operator comfort is improved. The DynaVariacor® products have useful features: the interior cross-section of the coupling remains constant at all angles, so pressure loss is minimised and flow rates are naturally optimum.
The system is available in several sizes and fittings for a variety of uses: small industrial hand tools such as impact wrenches, grinders, drills, screw guns and riveting machines as well as equipment of larger size and power such as nail guns, staplers, disc sanders, pneumatic drills, compacting machines and special equipment.
|
|
Deu-Plex Hydraulic Unions
- duoflow design
- self-supported rotating union
- flanged rotor
- balanced mechanical seals
- seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- full-media flow
- aluminum housing
- cast iron rotor |
|
1⁄8" to 1⁄2" Air-Hydraulic Unions
- monoflow design
- self-supported rotating union
- radial housing connection
- balanced mechanical seal
- seal combinations:
Carbon Graphite/Hardened Tool Steel or
Carbon Graphite/Silicon Carbide
- felt oiler in seal cavity for air service
- oiler for relubrication (3 - 5 drops/month)
- low torque
- weight-optimized design
- aluminum housing
- bearings lubricated for life
3⁄4" to 11⁄2" Air-Hydraulic Unions
- monoflow design
- self-supported rotating union
- radial housing connection
- balanced mechanical seal
- seal combinations:
Carbon Graphite/Hardened Tool Steel or
Carbon Graphite/Ceramic
- felt oiler in seal cavity for air service
- oiler for relubrication (3 - 5 drops/month)
- low torque
- aluminum housing
- stainless steel or steel rotor (respective of model)
Deu-Plex Hydraulic Unions
- duoflow design
- self-supported rotating union
- flanged rotor
- balanced mechanical seals
- seal combinations:
Carbon Graphite/Ceramic - standard
Tungsten Carbide/Ceramic - E.L.S.
- full-media flow
- aluminum housing
- cast iron rotor
|
|
Rotary Systems' ninety degree union is designed for high speeds. This swivel uses a ground shaft, mechanical seal, and dual ball bearings.
The 008 series is able to withstand moderate pressures at high speeds. |
|
Features
8 different, continuously improved sealing systems
Large number of product varieties available
Customer specific designs, even for high-demanding uses
Combinations of various mediums and electrical currents
The most modern materials and manufacturing processes guarantee the highest quality
Products
In almost all branches of industry rotary unions are needed for transmitting mediums between stationary and rotating machinery parts, whereby every application has different requirements. We have developed an extensive selection of various sealing systems, in order to meet these different requirements, and to be able to offer an optimal solution. We have a large range of products available, and as well customer specific designs. |
|
Multiflow rotaing union, fixing by flange.
Fluid being conveyed : all fluids (to be specified when placing the order)
Max pressure : 4275 PSI
Speed : According to your dimension
Number of flows : Standards 2 to 8 (other on request)
Installation : Flange
Dimension : 1/8" to 1"1/4
Type of seal : Composite seal
Materials : Nickel plated steel
Temperature : Standard 80°C (other on request)
Rotation : Sealed ball bearings |
|
A swivel joint is primarily for use on oscillating shafts, but is also suitable for transfering fluids to and from slowly rotating shafts.
Designs vary from simple knuckle joints, without independant bearings to models containing double row ball bearings for heavier duty. |
|
| DSTI's line of SE Series rotary unions are suitable for use in harsh environments. These compact assemblies have a maximum pressure rating of 510 bar, and are suitable for hydraulic oil, air, vacuum & coolant transfer. All of the SE Series rotary unions are available with integrated electrical slip rings for power & data transfer. The slip rings can be protected with a sealed aluminum cover if needed. |
|
| Goodyear is your one source for a wide selection of high-performance hydraulic hose fittings, covering a wide range of designs, shapes, sizes and pressure ratings. With low, medium and high-pressure fittings available for braided, spiral and thermoplastic hose. Fittings include Ultra-Crimp™ (1-piece), Uni-Crimp™ (2-piece), Dual-Grip™ (2-piece) and Field-Grip™ (reattachable). Our line of 21 thread ends include SAE, NPTF, JIC, British Standard, DIN and JIS. End styles include straights, swivels, elbows and flanges. Find the fittings and threads you need, from one source. From Goodyear. |
|
Rotary Systems offers a unique line of low torque air/vacuum rotary unions. These unions are designed specifically for low speed, low pressure, air/vacuum applications that require minimal torque.
The unions utilize a hardened and ground shaft, o-ring seals and dual radial ball bearings to prevent side loading to the seals. The passages are 1/8” NPT and are offered in 2, 4, 6 and 8 passage models. The models shown in the picture are the 2 and 4 passage unions.
See our 028 series to view each size.
Please contact our Technical Sales department at 1-800-959-0146 for operating specifications and torque readings for each model.
|
|
Dynaswivel® Air Line Connector
- The Dynaswivel® is a patented universal-joint that connects portable air tools to an air line
- Swivels 360 DEGREES AT TWO PIVOT POINTS allowing the air hose to drop directly to the floor while providing superb tool handling
- Improves tool maneuverability, minimizes operator fatigue and extends hose life
- New lightweight, non-marring composite construction; industrial quality
- Improved air flow
|
|
MID has developed a new variable geometry coupling, which can swivel through 360 degrees: the DynaVariacor®. This internationally patented system provides in particular complete flexibility for use with all types of pneumatic tools and appliances.
The coupling is robust, light and compact; it reduces wear and avoids coiling of the feed hose. This coupling enables increased precision of movement of the tool by reducing the handling force required by the user, due to the relative rigidity of the feed pipes. Operator comfort is improved. The DynaVariacor® products have useful features: the interior cross-section of the coupling remains constant at all angles, so pressure loss is minimised and flow rates are naturally optimum.
The system is available in several sizes and fittings for a variety of uses: small industrial hand tools such as impact wrenches, grinders, drills, screw guns and riveting machines as well as equipment of larger size and power such as nail guns, staplers, disc sanders, pneumatic drills, compacting machines and special equipment.
|
|
| DSTI offers a number of standard & custom union designs that have been used in the robotics industry. These assemblies can be used to transfer air & electrical signal data to & from the rotating gripper. |
|
Ball Swivel Fittings:
Ball Swivel Fittings are used between the tool and air supply hose to eliminate kinking and twisting. Ball Swivels provide a more natural range of motion than the "traditional" air tool swivel fitting. In addition to providing a greater bend angle (20 degrees to 25 degrees depending on size) and flow capacity than ball swivels made by other manufacturers., these fittings will increase tool maneuverability and production capacity, minimize user fatigue, extend the life of the hose and minimize cost. Made of hardened steel with nickel-plated barbs.
Coilhose Pneumatics offers the following lines of Fittings:
COILOCK Push-to-Connect Fittings
Metric COILOCK Push-to-Connect Fittings
Speed Controls
Poly-Tube Fittings
Brass Hose Fittings
Nylon Hose Fittings
Ball Swivel Fittings
Ball Swivel Connectors
Orbital Swivel Fittings
Brass Pipe Fittings
|
|
| The Swivel Fittings are ideal for a broad range of medical, industrial, laboratory and instrumentation applications involving pneumatic systems. Swivel Fittings are available with 10-32 UNF, 1/8-27 NPT, or 1/4-18 NPT threads. Three models are available, Straight Swivel, Swivel Elbow and Swivel Tee. The unique design (Patent # 4,496,204) allows the fitting to swivel 360 degrees. The snap type fitting is sealed with a Buna-N, Viton, Silicone, or EPDM o’ring. All models are available with barbs for 1/16”, 3/32” or 1/8” I.D. flexible tubing. The absence of a molded parting line on the first barb guarantees a leak free seal. |
|
| UNION rotary, traversing, and tilting tables are predominantly suitable for use on floor-type boring mills and/or traveling-column machines. However, they can also be operated separately with self-contained controller and self-contained operator console. The PDV 10 with a machining torque of 12.5 kNm ensures turning operations on large cylindrical parts in association with traveling-column machines and suitable turning tool adapters. So, supplementary turning operations can be performed. |
|
| DSTI offers a number of standard & custom union designs that have been used in the robotics industry. These assemblies can be used to transfer air & electrical signal data to & from the rotating gripper. |
|
| ... products without technical information |
| |
TSR and TSR+C Ring / Triple Swivel Ring
Triple articulation allows it to line up perfectly with the sling
Allows the hook to move parallel to the supporting face of the ring being drawn at 90°
Two ways of tightening: either by open-ended spanner, or by Allen key
From M8 to M56 as standard; for loads from 0.3 t to 22 t
From UNC 3/8" to UNC 2" as standard; for loads from 1,200 lbs to 50,000 lbs
Other variants of fitting bolts on request
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
| ... products without technical information |
| |
Gas springs and dampers for seat adjustment
With their defined movements, a high level of functional comfort,
a long, maintenance-free life and highest quality, STABILUS
products make office chair seat adjustment more ergonomic.
For example seat height...
With the use of gas springs, the seat height can be
brought into the ergonomically correct position for any
body height at any workstation. A seat with end position
cushioning offers even more seating comfort.
For example backrest...
Continuous contact between back and backrest provides
lumbar support and strain relief for intervertebral discs.
For example seat tilt...
Ergonomically correct seat tilt places different amounts of
pressure on the pelvic bones and the spine, which meets the
ergonomic demands of dynamic seating.
For example synchronous adjustment…
Where seat tilt and backrest can be adjusted to fit the
body, gas springs provide the individual counter-pressure.
|
|
|
|
<