|
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
|
|
|
|
Features:
Dimension of obstruction according to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
Diameters of boring: 25 to 200 mm
Diameters stem: 12 to 140 mm, except CDT3: 28 to 140 mm
Pressure rating: 160 bars
Race until: 2700 mm for CDT3 and CGT3, 1400 mm for CST3 according to fixing and diameters stem/piston, pressure operating and principle of use
13 types of fixing
Range CGT3 is based on range CDT3 equipped with a double stem. Range CST3 is based on range CDT3 but has a position encoder without contact. The position encoder is planned for exit analogical (0 -10 Volts or 4.-20 my) or digital display IF. Possibility of flasquer a base plate gauges 6 or 10 directly on the jack.
Advantages customers:
Proximity: made in France
Guide screwed, facilitating the interventions of maintenance
Damping autorégulé or adjustable with the choice
Purge patented safety, facilitating and making safe the purging
Facility of assembly thanks to the positions freely sélectionnables of the openings on head and bottom
The throats of housing of the joints on the piston answer the ISO 7425-2 and are identical for the types of joint M, T and V, i.e. an exchange of joints is easily realizable without changing the piston.
|
|
Hydraulic cylinder (UHD, UHSZ 100/ 160, UHSZ 250)
in accordance with the currently valid ISO and DIN regulations.
In addition, standard cylinders up to 250 bar. In line with customer requirements we also develop special cylinders according to quite individual specifications.
All cylinder versions can be produced as serve cylinders or fitted with an integrated position measuring system.
|
|
|
Switch mounts by strap to cylinder, place as required for access and signal phasing: R (Sink) or S (Source) switches only
|
|
|
Cylinders with tie-rods, providing an alternative to the V160C series in case of use with high pressures and temperatures. They are extremely reliable and sturdy.They can be fitted with adjustable magnetic end stroke switches. Ideal with die-cast molds.
|
|
- Mounting of head and cap according to the tie rod principle
- Service-friendly modular system
- Small installation dimensions
- Various mounting types
- Interchangeability thanks to standardization
- Industry-specific and project-related cylinders on inquiry
|
|
Hydraulic cylinders with block-type body
single acting with / without spring return
double acting
piston diameter 16 up to 200 mm
max. operating pressure 160/250/500 bar
strokes from 8 to 200 mm
|
|
Hydraulic clamps and clamping cylinders
single or double acting
max. clamping forces from 2.2 to 50 kN
max. operating pressure from 100 to 500 bar
max. clamping strokes from 3 to 16 mm
|
|
Features & benefits
- can be used in all positions
- protected against ejection of the plunger
- pressure relief valve on outlet port
- flat saddle prevents damage of the plunger. Easy to replace.
- flat saddle easy to replace by tilting saddle for off-center loading
|
|
Hydraulic cylinder with integrated guide rods and front block
to compensate high side loads and moments
piston diameter 25 up to 100 mm
max. operating pressure 250 / 500 bar
strokes from 8 to 200 mm
|
|
Hydraulic cylinder, design with tube
double acting
piston diameter 25 up to 80 mm
max. operating pressure 200 / 250 bar
strokes from 60 to 1,200 mm
|
|
Hydraulic workpieces to provide a self-adjusting rest for workpieces
and to compensate deflection and vibration under machining loads
single and double acting
admissible load from 6 to 102 kN
max. operating pressure 500 bar
plunger strokes from 6 to 20 mm
|
|
for heavy loads up to 565 tons!
All-purpose and can be combined with different hydr. pumps.
All cylinders comply to the demanding ASME B30.1 standard and are proof tested to 125% of capacity before leaving the factory.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance!
|
|
for heavy loads up to 565 tons!
We are offering high pressure hydraulic tools and equipment like cylinders, pumps, shop equipment, bearing maintenance etc.
On request we will send you the complete catalogue and please do not hesitate to contact us - thanks in advance!
|
|
| ... products without technical information |
| |
Linear Thrusters Pneu-Moment
For smooth, guided motion. A durable housing with guide shafts keeps our Linear Thruster from rotating and allows it to carry higher loads. Choose from two different models. A choice of stroke lengths and a wide variety of catalog options make the Bimba Linear Thrusters easy to use and ready to order.
The Benefits of the Linear Thrusters Pneu-Moment Include:
Bimba stainless steel body air cylinders for long, reliable life
Optional magnetic piston for use with Hall Effect or Magnetic Reed Switches
Optional adjustable cushions for smooth deceleration of load at end of stroke
Optional internal or external bumpers to absorb shock or adjust stroke
Easily accessible ports
|
|
|
High load weight vs extension. Five bore sizes from 3/4" (20mm) to 2" (50mm). Stroke lengths up to 12" (305mm), Base or side mount. Linear ball or composite bearings. Options include switches, shock absorbers, stop collars and bumpers.
|
|
Rod Lock Cylinders
* The Bimba Original Line Rod Lock Cylinder is a normally clamped unit that holds the piston rod in position when air pressure is not present. It is ideal for preventing drift at machine shut-down.
* The rod lock air cylinder has dowel pins that ride in the cam groove. When air pressure is present, piston actuates and dowel pins follow cam to open position, allowing piston rod to travel freely through clamp. In the absence of pressure, the spring actuates the piston and dowels follow to closed position, activating the rod clamp.
* The Rod Lock is not a safety device. It cannot be used for intermediate stopping; the cylinder is designed to prevent drift from a stationary position.
* Load weight must not exceed the stated holding force for the cylinder.
* Bore sizes are 3/4", 1-1/16", 1-1/2 ", and 2".
|
|
TRD Manufacturing
TRD Manufacturing Cylinders are recognized for their durability, high quality construction and long-lasting performance. Manufactured in several different types including, NFPA-interchangeable cylinders, specialized cylinders and accessories, TRD Cylinders represent a significant step towards Bimba's strategy to expand their industry-leading line of actuators.
Advantages of TRD Cylinders Include:
* Space saving design
* Many cylinder options to choose from
* Precision designed to provide accurate linear movement and positioning
* Other models include all stainless steel (SS) and electroless nickelplated (EN), and low friction for smooth operation (LF)
|
|
|
|
|
|
Custom Thrusters
With over 30 years experience in the automation industry, we at Ultramation understand the challenges faced by today's engineers and we recognize that a standard "off the shelf" unit does not always meet the need. Our specials range from simple modifications of standard units to complete customized solutions. We are versed in utilizing various materials and finishes in order to accommodate specific design and operating environment demands. We also offer both 2D and 3D design capability and our service and quality is unsurpassed.
Early in the design phase, we work closely with the customer to thoroughly understand the requirements and expectations. Once the design is finalized, documentation is provided for both design confirmation and future traceability. Customers can rest assured that their customized design will be available in our document control system for years to come.
Our design and fabrication experience enables us to provide competitively priced custom solutions and fast delivery. Quantities can range from 'one-of' designs to high volume production. We welcome the opportunity to quote these special applications because we recognize that today's special might well be tomorrow's standard.
|
|
The Two Shaft Linear Thrusters offer a compact design while offering maximum design flexibility. They feature two precision guide shafts that provide non-rotational linear guidance and high load capacity. Replaceable linear ball bearings are standard and provide long life, high load capacity and low-friction service. Optional composite bushings and chrome plated stainless steel guide shafts provide a solution for more challenging environments. A stainless steel option is offered for wash down applications.
The black anodized precision machined housings are designed for replaceable stainless steel or aluminum body nose mounted cylinders. Cylinder options range from magnetic pistons to dry service. Other options include position sensing, counterbored or tapped short or long tooling plates, auxiliary mounting plates, and external bumpers or hydraulic shock absorbers.
|
|
|
Tie Rod Cylinders feature the patented Enersorb® piston which provides exceptionally low breakaway, high energy absorption and reduced noise output. The floating bearing design allows for minor misalignment and surperior wear characteristics.
|
|
NOTES:
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1' to 'C dimension.
2. Switch bracket mounts by strap to cylinder; place as required tor access and signal phasing
|
|
1. For oil pressures exceeding approximately 250 psi recommend option HP which adds 1" to 'C dimension
2. Switch bracket mounts to tie rod place as required for access and signal phasing.
|
|
To be able to achieve a maximum lifting movement with only a minimum insertion space available, lifting bags are the appropriate tools to use. With 12 models, Holmatro has a lifting bag for every job. Thanks to their unique low profile edges the lifting bags can easily be inserted under all circumstances.
The deflated height of our lifting bags is 22 or 25 mm. Using compressed air (maximum 8 bar), the largest model, the HLB 67, reaches a maximum inflation height of 520 mm. Another feature of the lifting bags is their ability to adjust to the lifting surface. The applied pressure is divided over a large surface compared to the use of hydraulic jacks.
|
|
for quick application in close space!
- Multi-layer design with Armid material.
- Fill time with 8 bar within seconds.
- Extensive accessories, like suitable case etc.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
