|
|
- TECBOLT Blind Rivet Bolt
Steel, Domehead, zincplated
- TECBOLT Blind Rivet Bolt
Stainless Steel, Domehead |
|
ARNOLD Fastener Express finds its basis in the thinking behind Rapid Prototyping. The Functional Prototyping service model adapted by ARNOLD makes it possible to reduce development and production times by up to 75 per cent – with no detrimental effect on quality. With Fastener Express ARNOLD is in a position to manufacture and supply customised complex fasteners within three weeks.
by minimising administration work
by feeding the incoming order straight to technical assessment
by simultaneously translating the three-dimensional CAD data into the product
machining replaces tool design and procurement |
|
Whether it is a question of bolts with head or without, with one, two or more turned grooves, with or without pin hole, with or without thread - mbo has got most of them.
Of steel and stainless steel, in all sizes, immediately from stock. In particular the standardized DIN parts are available in practically all sizes from DIN 1433 to DIN 1445 and from DIN EN 22338 to DIN EN 22341. In diameters from 4 mm to 100 mm and in lengths from 20 mm to 200 mm. At mbo you can even get those DIN bolts which are no longer to be found in the official standard lists.
Special parts to customer's drawing or sample are no problem. We have been producing bolts here for 40 years. Why don't you profit from this experience?
|
|
• Huck Huck-Spin
-High tensile friction grip fastener
-No pin-tail - reduced wastage
-No pin-tail – low noise installation noise
-No pin-tail – no pinbreak: increased corrosion resistance
-Semi-automatic tooling installation – minimises installation time
-Unique helical lock groove - Holds pins and collar in place prior to installation
-Pin head style – Flanged hexagonal, flanged round
-Collar style – Flanged hexagonal, flanged round
-Materials - Steel
-Diameters – 6.4, 7.9, 9.5 12, 14, 16, 20 mm |
|
Stainless steel screws, bolts and fixing elements
Complete range in A2 and A4 stainless steel.
Machine screws, screws for sheet metal, wood-screws, self drilling, security screws, knurled screws...
Hexagon head, button head, hexagon socket, six lob, countersunk head, raised, slotted,
cross recessed "Phillips" or "Pozidriv"...
Threaded rods, with 1 meter, 2m, 3m lengt...
Plain washers, spring washers, spring lock washers...
Hexagon nuts, cap nuts, prevailing torque type, wing nuts, blind rivet nuts...
Studs, pins, blind rivets, retaining rings, threaded stirrup, hose clips...
Fixing elements for building : wedge anchor, shield anchor, screw for concrete, nylon plug, chemical capsule...
Stainless steel cables and chains, shipping accessories, turnbuckle, schakle...
Hinge rolled knuckles... |
|
| A2, A4 stainless steel screws, nuts, washers, nails, pins, rivets and marine hardware. Metalscrews, sheetscrews, woodscrews |
|
The advantages of ATP as compared to
screw connections:
75 % less assembly time
No assembly errors
Not dependent upon pretension loads
Displacement-controlled pressing
Employment of favorably-priced resources and tools. |
|
Threaded bolts to DIN 1445 are available in standard or stainless-steel versions with diameters from 8mm to 20mm.
The best example of an ideal area of application is the conveyor belt. The seat of the roller bearing is often secured with a stud bolt. There are good reasons for this. First of all a stud bolt is easy to install. It only needs to be secured on one side, for example, with a nut. Secondly it is absolutely free from twisting and in addition has smaller tolerances than its “smooth brothers“. This guarantees reliable guiding of the belts. |
|
The anchor range proposed by Emile MAURIN provide innovation, safety and reliability.
We provide a range of fasteners for industry and building trade.
The Emile MAURIN anchor studs set hight performances for the fixings in concrete. Our sutds in coated steel and stainless steel are used to fix life-line, consoles, machine tool, ...
We propose different embedding products adapted to the industry :
- Resin :
* The resin cartridge are used in the hollow or full material for :
- fixing of concrete irons, threaded rods, sockets
- hight resistance anchors for railway, subway applications, ...
* Chimical capsul and thread rods :
We propose 2 types of chimical products :
- a chimical bulb used with a threaded rod for full materials (stone, concrete)
- an extrusion system of chimical fixings quick and easy to be used. It is a cap gun + a pack + a mixer
* Nylon ankle :
We propose a wide range of nylon ankles, well adapted for all types of support materials, they can be used for numerous apllications (shelf, wardrobe, ceiling, electrical boxes, ...)
* Anchor bolts and expansion cartridge :
This anchor system used for heavy load can be dismantled and set a hight expansion capacity
* Striking ankle :
They are fixations with steel cartridge :
- with slot in front to allow the expansion
- the rear threading enables the mounting of a screw or a threaded rod
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr |
|
UNISORB® VECTOR® Bolts :
Made from high quality forged steel, VECTOR® Bolts have a series of angular facets which resolve vertical stress forces into a cone-shaped pressure pattern. An advantage of this unique design is the increased contact area between the bolt and the grout. The wedge shaped design on the bottom of the bolt transfers the tensile load of the stud into a lateral compressional load in the foundation, assuring maximum pull out strengths.
The increase in load transfer to the foundation results in a reduction of the embedment depth required to obtain full strength of the anchor. This reduction in required embedment depth lowers the installation cost by reducing the core drilling and grouting requirements.
VECTOR® Bolts are available in several metric diameters and lengths in a 90,000 psi minimum tensile strength material. |
|
In order to answer the requirements of each industry, Emile MAURIN has developped a wide range of standard fasteners.
The Emile MAURIN fasteners department keep on stock more than 40 000 fasteners types, dispatched in 10 groups of standard products :
* Hexagonal head bolts
* Socket cap screws
* Nuts (hexagonal, flange, wing, slotted, ...)
* Washers (flat, spring, conical, ...)
* Threaded rods (1, 2, 3 meters, ASTM)
* Machine screws
* Tapping screws
* Self drilling screws
* Thread forming screws
* Wood and chipboard screws
* Rivets (aluminium, stainless steel, steel, structure rivet)
* Anchor parts
* Various products : pins, retaining washers, cage nuts, pin clips, conical springs, spring lock washer, clamp, ...
These products are available in several materials : steel, stainless steel A2, A4, brass and nylon.
Our fasteners are produced according to the standards NF, NFEN, DIN, ANSI, in all materials, grades (6.8, 8.8, 10.9 ...) and coatings.
The production process are cold forging, hot forging or bar turning.
The different recess types socket, 6 lobes allow an easier mounting and optimal tightening torque. Some screws are also with a pozidriv recess.
Our team of specialists are available to take care all your demands. |
|
• Huck C6L / C120L
-The Original Huck Design
-5.8 & 8.8 grade small diameter Lockbolt
-Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance
-Wide flange collar available on C6L - enables installation into non metallic materials
-Pin head style - Brazier, truss, countersunk.
-Collar style- Standard, flanged, wide flanged and low profile
-Materials - Steel, stainless steel, aluminium (C120L steel only).
-Diameters - 4.8, 6.4, 7.9, 9.5 mm |
|
• Huck C50L
-8.8 grade large diameter Lockbolt
-Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance
-High tensile friction grip fastener
-Thread head variety available for rail track applications
-Pin head style – Round, truss, countersunk, thread head
-Collar style - Standard, flanged, low profile
-Materials - Steel, stainless steel, aluminium
-Diameters – 12.7, 15.9, 19.1, 22.2, 25.4, 28.6, 31.8, 34.9 mm |
|
• Huck Huck-Fit
-10.9 grade large diameter Lockbolt
-High tensile friction grip fastener
-Unique helical lock groove - Can be used as a Fit up bolt
-Unique helical lock groove -Holds pins and collar in place prior to installation
-Can be removed with conventional tools
-Pin head style – Flanged hexagonal
-Collar style – Flanged hexagonal
-Materials - Steel
-Diameters – 12, 14, 16, 20, 24, 27 mm |
|
Emile MAURIN, as stainless steel fasteners specialist, propose to you a wide range of products :
* Hexagonal head bolts
* Socket cap screws
* Washers (all types)
* Threaded rods (length 1, 2, 3 meters)
* Machine screws
* Tapping screws
* Self drilling screws
* Wood screws, chipboard screws
* Special parts
Our fasteners are selected in several business : food, chemistry, pharmacy, water industry, building trade, navy, ...
Our products are in different grades : A2, A4, A4-80,A4-316L and tempered stainless steel.
Passivation and decontamination can be done.
With the addition of different alloy, we can obtain the chimical and mechanical performances adapted to the use :
- heat resistance
- cold resistance
- mechanical resistance
- oxydation and corrosion resistance
The stainless is quite recyclable so without any waste, which is a real advantage, in accordance to the environment policy.
Our proposal in stainless steel products is adapted to the industry requirements.
Please contact us by phone 0825 007 333 or on www.emile-maurin.fr |
|
Our more than 36 years’ experience on the market for stainless steel fasteners is brought to bear with particular force in this product segment.
All of the articles with relevance to fastening technology – from the traditional screws and nuts in thousands of individual models, through washers, retaining rings and keys in many versions, right up to bolts, split pins and rivets in just as many variations – can be delivered.
Both the parts standardized in accordance with DIN or ISO and the non-standardized fastening elements (e.g. chipboard screws, mushroom head screws, washers) are available.
Stainless steel remains the material of choice for most of the Lederer customers. Hardly any other material can boast its defining properties, such as corrosion resistance, long lifespan and non-magnetizability. And not least, the optical impression made by a mirror-fi nished stainless steel fastener infl uences the choice of material more often than one would suppose. |
|
| Parker-Kalon® manufactures a variety of specialty screws for industrial, construction and automotive use. They offer a wide range of product for numerous applications. |
|
| At TFC we have a vast range of Threaded and spring steel products |
|
• Huck Magna-Grip
-Huge grip range – Accommodates a wide variation in joint thicknesses - 14.3/23.9
-One pin and one collar cover a wide variety of applications – reducing the risk of incorrect
fastener installation
-Wide grip range minimises fastener inventory
-Flush pinbreak – No catching on clothes, skin or goods.
-Pin head style - Button, truss, countersunk, rivet, broad truss
-Collar style - Standard flange, medium flange, wide flange
-Materials - Steel, aluminium
-Diameters - 4.8, 6.4, 7.9, 9.5 mm |
|
High-strength fixings for applications to high mechanical characteristics.
Matter: aluminum, steel, stainless
Diameters: 4,8-6,4-8,0 and 10,0 mm |
|
JHFHB-M8-50
THREAD SIZE: M8*1.25
THREAD CODE: M8
LONG "L" :50
MIN.SHEET THICKNESS: 2
HOLE SIZE IN SHEET 0.08: 8
MaxHole In Attach.Parts: 9.5
H ±0.25: 12.5
S Max.: 3.5
T Max.: 1.78
MIN.DIST. HOLE C/L TO EDGE : 12.7
other sizes are fully available:
256, 440, 632, 832, 024, 032, 0420, 0518, 0616
M2.5, M3, M3.5, M4, M5, M6, M8, M10
JFH,JFHS,JFHA,JTFH,JTFHS,JHFH,JHFHS,JHFHB,JFH4
Features:
1. They are applied on sheet with thickness over 0.02 inches/0.76 mm.
2. Carbon steel, stainless steel and aluminum material are available. |
|
Considerable clamping strength, higher than that of a class 8.8 steel screw.
Dimensions : From M3 to M8 ex-stock, other dimensions under request.
Material : Steel zinc plated, stainless steel. |
|
Please use the link to check our full range of Screws,Bolts & Threaded Rod.
We can also custom mould if you require a special size or configuration. |
|
| A full range of plastic screws with a good resistance to liquids , in a wide range of colours. |
|
Quality screws
We offer a vast range of screws in order to sadisfy the customer needs.
Self drilling screw, self tapping screw
ITEM
L001 |
|
Pins with levelling head
Dimensions of M2.5 with M8
Matter steel zinc coated blanc*
For thickness of sheet from 1 to 3 mm
Ensure an assembly by screwing high characteristics (forced wrenching, various loads...)
Allows very powerful fixings
Very simple installation using a press |
|
Elite offers a broad range of levelling or emerging pins to you, with broad head allowing a great resistance in fine sheets or of the smooth pins.
One insert the head of the pin in sheet, the metal moved by the head will creep towards the throat thus creating a final assembly and offering important resistances to tightening and traction.
|
|
|
|
