|
|
Many standard versions of these robust and compact hydraulic cylinders are available ex-stock – it couldn't be quicker.
But, if it should be something special, we can also promptly react to your requirements.
• High quality
• Compact
• Hardened piston rods
• Short delivery times – large stock
• Piston diameter 16 to 200 mm
• Various standard strokes
|
|
One of our real strengths is in know-how gained from special solutions. Hänchen's standard range of products has for decades benefited from the know-how gained from the countless special solutions which our specialists have created for customers. Knowledge breeds success.
That is what has led, for instance, to special cylinders for water hydraulics made from stainless and non-magnetic materials, with twist-lock, special dampers, special seals, compensating valves in the piston, metering cylinders, three-position cylinders, rapid/force-speed cylinders, high-speed cylinders up to Vmax. 40 m/s, lifting/adjusting cylinders, cascade cylinders, core-pulling cylinders, multi-position cylinders, plunger cylinders, control and servo-cylinders, synchronous cylinders, tandem cylinders, telescopic cylinders, cooling jacket cylinders, hollow-piston cylinders, oscillation cylinders, tensioning cylinders, locking cylinders - a solution for every problem - right through to customised special developments.
|
|
|
Douce Hydro is able to design and manufacture any type of custom designed hydraulic or pneumatic cylinders. Douce Hydro cylinders are recognized by our customers for their high quality, advanced technology and long service lives. Since 1950, Douce Hydro clients have benefited from our extensive in-depth know-how based upon over 50 years of experience in the cylinders industry.
|
|
By direct coupling minimizes lost motion (mechanical output : 90 to 95%). Rotary actuators offer distinct torque advantages for start/stop operation and the acceleration of large masses, and provides designers with an ideal power source for all type of mechanical motion.
Applications :
- toggle push clamp
- continuous rotation
- index – position
- turn and oscillate
|
|
There are two versions of the AHP flange cylinder available.
The structure of the compact FZ 250 is similar to the tried-and-trusted block cylinder. It combines its high quality and reliability with the installation possibilities of a flange cylinder.
Our double-pipe cylinder DFZ 250 is also suitable for longer strokes on account of its dual wall design.
Both flange cylinders are applied with pressure from one side for both forward and return strokes and offer excellent sealing.
|
|
MMB Cylinders Parker's MMB series hydraulic 'roundline' cylinders are heavy duty cylinders designed for service in arduous applications such as steel mills, where a rugged, durable cylinder with a 'clean' external design is required.
MMB cylinders are designed to ISO 6020/1 specifications.
Standard pressure: up to 160 bar
Bore sizes: 40mm to 320mm
Piston rod diameters: 22mm to 220mm
6 standard mounting styles
Any practical stroke length
Standard temperature range: -20°C to 80°C
Options include cushions, stop tubes and oversized ports
Special designs to customer specification
|
|
We supply two types of hydraulic pivoting tension jacks with different pivoting angles.
- With the customary quality features.
- High quality
- Compact
- Hardened piston rods
- Short delivery times - large range
- Piston diameter 25 to 50 mm
- Various standard strokes
|
|
Rated to 2500 psi, 4000 shock pressure. Standard cylinders feature o-ring with polyurethane back-ups on piston and double lipped u-cup on rod. Full threaded rod through 1.25 diameter.
|
|
Technical data of Hänchen hydraulic cylinders:
Series 120 – 150 bar with/without final stroke cushioning
Piston Ø from 12 – 600 mm,
forces from 1,7 - 5655 kN,
stroke up to 7500 mm
Series 300 – 300 bar with/without final stroke cushioning
Piston Ø from 25 – 600 mm,
forces from 14,7 - 8482 kN,
stroke up to 7500 mm
Series 100 as per DIN 24336
Piston Ø from 25 - 200 mm,
forces from 4,9 - 314,2 kN,
stroke up to 7500 mm
Series 160 medium as per DIN ISO 6020-1
Piston Ø from 25 - 200 mm,
forces from 7,9 - 503 kN,
stroke up to 7500 mm
Series 160 compact as per DIN 24554/ISO 6020-2
Piston Ø from 25 - 200 mm,
forces from 7,9 - 503 kN,
stroke up to 1500 mm
Series 250 as per DIN 24333/ISO 6022
Piston Ø from 50 - 200 mm,
forces from 49 - 785 kN,
stroke up to 7500 mm
Other dimensions on request
Products of the range of services:
- Clamping devices for piston rods (Ratio-Clamp®)
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories
|
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here.
Our engineers many years of experience and competence guarantee that this requirement is met correctly and in the best possible way. KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs.
|
|
Construction: Steel, Tie rod design; Repairable
Standards: NFPA Heavy Duty Hydraulic, ANSI/(NFPA)T3.6.7R2-1996
Bore Size: 1 1/2" through 6"
Strokes: Available in any practical length
Piston Rod Diameter: 5/8" to 4"
Operating Medium: Hydraulic oil
Mounting Styles: 18 Standard
Nominal Pressure: 3000 psi
Standard Operating Temperature: -10°F to +165°F
Optional High Temperature Option -10°F to 250°F
Rod Ends: Three standard choices; specials to order
Cushions: Optional at either or both ends
SAE "O" ring ports are standard, others are available
|
|
Construction: Steel, Tie rod design; Repairable
Standards: NFPA Heavy Duty Hydraulic, ANSI/(NFPA)T3.6.7R2-1996
Bore Size: 1 1/2" through 6"
Strokes: Available in any practical length
Piston Rod Diameter: 5/8" to 4"
Operating Medium: Hydraulic oil
Mounting Styles: 18 Standard
Nominal Pressure: 3000 psi
Standard Operating Temperature: -10°F to +165°F
Optional High Temperature Option -10°F to 250°F
Rod Ends: Three standard choices; specials to order
Cushions: Optional at either or both ends
SAE "O" ring ports are standard, others are available
|
|
Douce Hydro is able to design and manufacture both ISO standard and NFPA type standard cylinders. Douce Hydro cylinders are recognized by our customers for their high quality, advanced technology and long service lives. Since 1950, Douce Hydro clients benefit from our extensive in-depth know-how based upon over 50 years of experience in the hydraulic cylinders industry.
Douce Hydro offers several types of standard hydraulic cylinders:
1°) Douce Hydro standard hydraulic cylinders
2°) ISODOUCE standard hydraulic cylinders, following ISO code (European design code)
3°) NFPA type hydraulic cylinders (North-American design code)
4°) Any other standards…
For any standard cylinder, we can offer in addition any type of attachment, with cushioning / shock absorbers, or add any specific request.
|
|
The HDA double acting range offers the utmost in versatility and durability. Specifically designed for heavy duty lifting, construction and maintenance applications as well as presswork and industrial production,
the double acting design provides substantial pulling force in the piston retraction mode as well as providing fast, controlled retraction for continous duty cycle operation. All models up to 203 tonnes are supplied with flat saddle, piston rod threads and collar threads as standard. Models form 326 tonnes and upwards are supplied without collar thread and piston rod thread, however include replaceable titing saddle as standard. Standard range model are featured in this catalogue, however other stroke and tonnage options are available on request.
|
|
LJM Hydraulik – developing, manufacturing and marketing hydraulic cylinders for practically every purpose
Our business concept is:
The right cylinder in the right quality at the right price, at the agreed time of delivery.
|
|
Series AV2, HV2, A2
The Back-To-Back Cylinder is used where three or four-rod positions are required. Two cylinders are attached back-to-back using common tierods. Different strokes on each cylinder give the capability of four positive stop positions.
Advantages: Four positive stop positions possible, two cylinders with common tierod, independent rod movement on each end of unit.
|
|
Its short overall length and universal areas of application are what make the AHP Merkle Standard so popular. The short delivery time is also a big plus factor for the standard cylinder.
Take note: the HZH 250 is the fully compatible further developed version of the HZH250.
- Series UZ 100, HZ 160, HZ 250
- Compact constructions
- Hardened piston rods
- Short delivery time
- High quality
- Piston diameter 16 to 100 mm
|
|
We deliver a wide range of cylinder types, such as: Double acting cylinders
Single acting cylinders
Plunger cylinders
Double acting telescopic cylinders
Stainless steel cylinders, oli- and water hydraulic
Centre hole cylinders
ISO norm cylinders
Hydraulic cylinders with integreted transducer, inductive proximity switches etc.
Hydraulic cylinders with any integrated valves (build in valves)
Hydraulic special cylinders
DNV type approved hydraulic cylinders
GL type approved hydraulic cylinders
Special piston rod and tube materials
Special mountings
Hydraulic cylinders with special certificate
Special surface treatments
|
|
Maximum Cylinder load 150 kg; please check also the maximum system load
Cylinder stroke up to 600 mm
The Cylinder requires an external guide mechanism. Please take care that there is no side load on the Cylinder
The tube connections and the piston rods can be combined in the way you prefer
|
|
3000 PSI WHD SERIES CYLINDER
FEATURES:
Configurable custom rod design
1-2 week lead-time
manufactured with Parker “Zero Leak” sealing technology
BENEFITS:
Additional outside diameter lip that prevents contaminates from entering the system by bypassing the OD of the wiper body.
Superior BTU rod seal increases the conformity of the seal to the rod. The second lip on the seal improves stability, limiting the rocking motion of the seal to reduce seepage
Buffer ring acts as a primary seal and pressure spike suppressor. The combination of rod seal and buffer ring results in an exceptionally dry rod for longer life.
Piston includes 2 wear rings and bronze filled PTFE seal designed for extension free, leak proof service
1045/1050 chrome plated, induction hardened, 100K rod is more resistant to damage to rod and seal
1026 DOM cylinder tube bores are skived and roller burnished to provide precision finishes for extended seal life
|
|
MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial and mobile applications.
Two versions are available: the MWA Series for use at working pressures up to 250 bar, and the MWB Series for 160 bar applications.
The MW range of cylinders is of welded construction at the cap end, with a threaded rod bearing at the head housing the gland seals.
Standard pressure: up to 160 bar (MWB) and 250 bar (MWA)
Bore sizes: 32mm to 200mm (MWB) and 50mm to 200mm (MWA)
Piston rod diameters: 14mm to 125mm (MWB) and 32mm to 200mm (MWA)
5 standard mounting styles
Stroke lengths up to 4000mm
Standard temperature range: -30°C to 80°C
Options include air bleeds, position switches and custom paint finishes
Special designs to customer specification nbsp;
|
|
We deliver a wide range of cylinder types, such as: Double acting cylinders
Single acting cylinders
Plunger cylinders
Double acting telescopic cylinders
Stainless steel cylinders, oli- and water hydraulic
Centre hole cylinders
ISO norm cylinders
Hydraulic cylinders with integreted transducer, inductive proximity switches etc.
Hydraulic cylinders with any integrated valves (build in valves)
Hydraulic special cylinders
DNV type approved hydraulic cylinders
GL type approved hydraulic cylinders
Special piston rod and tube materials
Special mountings
Hydraulic cylinders with special certificate
Special surface treatments
|
|
Manufactured in accordance with DIN/ISO Standards these cylinders incorporate all the advantages of a design complying with these specifications.
- Hardened piston rods
- High quality
- Available with several different types of seal
- Piston diameter 25 to 200 mm
|
|
Firestone Airstroke actuators have long been used in the industrial market as pneumatic actuators incorporated into new and innovative machinery designs as well as replacement actuators for existing applications that had previously used traditional pneumatic or hydraulic cylinders.
These replacement markets are created by the advantages of a flexible walled pneumatic actuator that is durable, operates well in corrosive and abrasive industrial environments, easily accepts misalignment, and has a high ratio of stroke to collapsed height. Each of these features give Firestone Airstroke actuators the advantage over traditional cylinders.
|
|
Inflatable Thrustors
Pressing- Lifting - Gripping - Guiding - Dampening - Handling...
Mustpress lifting bags are adapted to any industrial equipment and usually replace hydraulic and mechanical jacks. They are made of elastomer coated fabrics and supprt high inflation pressure (up to 100 bars).
Available in different shapes and dimensions (square, round, rectangular, toric). In order to increase their thrust, they are available with 2 or 3 stages.
Mustpress is inflated with air, oil or water.
|
|
CUSTOM DESIGNED CYLINDERS
Small, Medium, Large and Extra-Large custom designed cylinders
Fifty years of experience, backed by a constant drive for innovation, have made Douce Hydro a force to be reckoned within the field of hydraulic equipment. As a technological leader in hydraulic cylinders, resolutely turned towards the export market, with foreign sales accounting of more than 50% of its turnover, Douce Hydro ranks among the main players of the international market (MOCI award in 1997).
Douce Hydro is able to design and manufacture any type of custom designed hydraulic or pneumatic cylinders. Douce Hydro cylinders are recognized by our customers for their high quality, advanced technology and long service lives. Since 1950, Douce Hydro clients have benefited from our extensive in-depth know-how based upon over 50 years of experience in the cylinders industry.
|
|
Same construction as our block cylinders with the same advantages of the AHP Merkle top quality products.
The external shape enables many different types of attachments and installations.
• High quality
• Compact
• Hardened piston rods
• Short delivery times - large stock
• Piston diameter 16 to 200 mm
• Various standard strokes
|
|
The AHP screw-in cylinder excel on account of their tiny size. When integrated in a tool, it works without a large amount of space being required. With all the quality characteristics of a Merkle cylinder.
- Resinated piston rod, ground and chromed
- State-of-the-art seal
|
|
These cylinders are specially designed for a short stroke and, because of their versions with external threads over the complete housing or in a cubic shape, provide maximum flexibility in widely differing installation conditions.
• High quality
• Compact
• Hardened piston rods
• Short delivery times - large range
• Piston diameter 25 to 50 mm
• Various standard strokes
|
|
We deliver a wide range of cylinder types, such as:
Double acting cylinders
Single acting cylinders
Plunger cylinders
Double acting telescopic cylinders
Stainless steel cylinders, oli- and water hydraulic
Centre hole cylinders
ISO norm cylinders
Hydraulic cylinders with integreted transducer, inductive proximity switches etc.
Hydraulic cylinders with any integrated valves (build in valves)
Hydraulic special cylinders
DNV type approved hydraulic cylinders
GL type approved hydraulic cylinders
Special piston rod and tube materials
Special mountings
Hydraulic cylinders with special certificate
Special surface treatments
|
|
|