|
|
Heavy duty safety gate switch
The ATSTOP has a heavy duty tongue and head where the tongue allows a 12mm misalignment. The tongue and head unit can rotate in 90o increments. The product is ideally designed for machines without run down cycles where quick and frequent access to equipment is required, via either hinged or sliding doors.
When the machinery is in operation the tongue is engaged and the power is on. If accesss is required, the door is simply opened releasing the tongue from the unit,giving positively guided, forced disconnection of the safety switch contacts.
- designed for use in harsh environments (dust, moisture and vibration)
- different control voltages available
- AS-interface version available
- available with different heads and actuators
- available with safety keys (to prevent accidental lock in of personnel)
- for use in category 4 (EN 954-1) applications |
|
Mechanical robust door interlock for safety accesing machine areas, gates or hatches.
- Can be used in Category 4 (EN 954-1) applications
- Pattented runner bar system
- Safety key to prevent accidental lock in of personnel
- Available in full stainless steel
- Suitable for use in ATEX zone 1 and 2
- No wiring on the installation
Can be used in combination with Fortress (solenoid controlled) key switches and key exchange boxes. |
|
GENERAL:
The Hercules access interlock is used on hinged and sliding doors as a part of a interlocking system with the function of preventing access to dangerous areas.
OPERATION:
Key free-bolt trapped-2n/c 1n/o
The interlock prevents the opening of the bay door by the means of bolt which can be released only when the key is inserted and turned. Rotation of the key operates theelectrical contacts within the Hercules. With the bolt removed and the
Weight: 1.3 Kg
Temperature range: Min. -30°C (Ice free) Max. +80°C.
Bolt material: Brass & stainless
Housing material: Aluminium
Lock material: Mazak & brass
Ingress Protection: IP65
Mechanical lifecycle: 200,000 operations
Switch Standards: IEC 947-5-1.
Approvals: VDE,UL, & CSA.
Cable gland: PG11
Current: 10 A
Max voltage: 500V. |
|
| ... products without technical information |
| |
This bolt is blocked when it is in "off" position, the block is made by a spring incorporated on it, the unblock is made by an electrical signal.
The key has two positions, in the locked position the key can´t be removed, to remove it, it is necessary to unlock the bolt.
It is designed to protect properly people from electrical accidents, it is assembled inside the front of the high, medium and low voltage electrical equipment. |
|
| Loading bay door interlock used on manually operated doors to link the Salvo emergency airline lock to the door. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
• Huck Huck-Spin
-High tensile friction grip fastener
-No pin-tail - reduced wastage
-No pin-tail – low noise installation noise
-No pin-tail – no pinbreak: increased corrosion resistance
-Semi-automatic tooling installation – minimises installation time
-Unique helical lock groove - Holds pins and collar in place prior to installation
-Pin head style – Flanged hexagonal, flanged round
-Collar style – Flanged hexagonal, flanged round
-Materials - Steel
-Diameters – 6.4, 7.9, 9.5 12, 14, 16, 20 mm |
|
Spinner-Grip Flange Lock Nut
Spinner-GripTM Flange Lock Nuts are the latest innovation in locking nuts. Free Spinning installation eliminates the need to "wrench" the nut down the thread.
Grade 8 strength and quality, but will work with any grade of fastener.
Does not damage threads or plating on fasteners.
Locks to the part - not to the threads. (Exceptional performance in applications with heavy vibration)
Greater temperature range than nylon insert locknuts.
Hardness of 28 - 38 HRc - More effective at maintaining clamp load under vibration.
Not limited to 5 reuses, as with most other torque lock nuts. |
|
• Huck C6L / C120L
-The Original Huck Design
-5.8 & 8.8 grade small diameter Lockbolt
-Made to British Standard B7805: Part 1: 1997 - a mark of quality, safety and performance
-Wide flange collar available on C6L - enables installation into non metallic materials
-Pin head style - Brazier, truss, countersunk.
-Collar style- Standard, flanged, wide flanged and low profile
-Materials - Steel, stainless steel, aluminium (C120L steel only).
-Diameters - 4.8, 6.4, 7.9, 9.5 mm |
|
• Huck Huck-Fit
-10.9 grade large diameter Lockbolt
-High tensile friction grip fastener
-Unique helical lock groove - Can be used as a Fit up bolt
-Unique helical lock groove -Holds pins and collar in place prior to installation
-Can be removed with conventional tools
-Pin head style – Flanged hexagonal
-Collar style – Flanged hexagonal
-Materials - Steel
-Diameters – 12, 14, 16, 20, 24, 27 mm |
|
• Huck C50L
-8.8 grade large diameter Lockbolt
-Made to British Standard B7805: Part 2: 1997 - a mark of quality, safety and performance
-High tensile friction grip fastener
-Thread head variety available for rail track applications
-Pin head style – Round, truss, countersunk, thread head
-Collar style - Standard, flanged, low profile
-Materials - Steel, stainless steel, aluminium
-Diameters – 12.7, 15.9, 19.1, 22.2, 25.4, 28.6, 31.8, 34.9 mm |
|
The CLAV-SERT thread inserts consist of rigid one-piece bushes.
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous. |
|
• Huck Magna-Grip
-Huge grip range – Accommodates a wide variation in joint thicknesses - 14.3/23.9
-One pin and one collar cover a wide variety of applications – reducing the risk of incorrect
fastener installation
-Wide grip range minimises fastener inventory
-Flush pinbreak – No catching on clothes, skin or goods.
-Pin head style - Button, truss, countersunk, rivet, broad truss
-Collar style - Standard flange, medium flange, wide flange
-Materials - Steel, aluminium
-Diameters - 4.8, 6.4, 7.9, 9.5 mm |
|
An easily fitted insert.
The CLAV-SERT thread inserts consist of rigid one-piece bushes
Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking keys.
Resistant to pulling
The fitting of the insert could not be simpler. It is enough to drill a hole, tap it to the required dimensions, screw in the insert and lock it in position by simultaneously pushing the 2 or 4 keys which will hold the insert against the walls and prevent it from rotating.
CLAV-SERT can be fitted in any material, whether ferrous or non-ferrous. |
|
Precision shaft nut with high-quality security system
SPIETH lock nuts fulfill the ISO thread tolerance class
- fine and/or 5H and possesses a plan run accuracy of IT4. This precision in combination with a singularly effective security system thereby most fastidious demands of mechanical engineering apply e.g. in spindle and drive storage of modern machine tools and correspond. Owing to the special characteristics fast optimal assembly results are obtained. An extensive company standard program provides for requirement-fair and economical solutions with high availability. On the basis of their requirements special solutions can be compiled and offered ready to be installed.
The mother series in the overview:
- MSR for Standardanwendungen
- MSA with reduced contact surface
- MSF with reduced overall height
- MSW for high operating loads |
|
Shaft nuts
Shaft nuts are highly precise mechanical components for mechanical engineering. They are used mainly for the attachment by camps on waves, can be used however also for the attachment of other elements, if particularly high requirements are placed against the attachment. Lock plates and grubscrews prevent the unintentional loosening of the connections.
Our shaft nuts are manufactured from high-quality steel and are subject to a high Fertigungsgenauigkeit. It is possible to achieve an even distribution of load on the threads and the camp unit what leads longer life span of the connection again to a higher rigidity and. Small leads of thread (fine threads) make an exact attitude of position and pre-loading for the shaft nut possible.
|
|
| NORD-LOCK washers with enlarged outer diameter (sp) in combination with flanged nuts/ bolts are recommended for use on large/long holes, painted surfaces or soft materials, e.g. aluminium. |
|
NORD-LOCK is a pair of washers with a wedge-locking action meeting DIN 25201 which is a unique method using tension instead of friction. The rise of the cams between the NORD-LOCK washers is greater than the pitch of the bolt. In addition, there are radial teeth on the opposite side. The washers are installed in pairs, cam face to cam face.
When the bolt and/or nut is tightened the teeth grip and seat the mating surfaces. The NORD-LOCK washer is locked in place, allowing movement only across the face of the cams. Any attempt from the bolt/nut to rotate loose is blocked by the wedge effect of the cams.
NORD-LOCK washers positively lock the fastener in a joint which is subjected to any kind of vibration or dynamic loads.
|
|
NORD-LOCK is a pair of washers with a wedge-locking action meeting DIN 25201 which is a unique method using tension instead of friction. The rise of the cams between the NORD-LOCK washers is greater than the pitch of the bolt. In addition, there are radial teeth on the opposite side.
The washers are installed in pairs, cam face to cam face. |
|
| NORD-LOCK stainless steel washers, A4, are made of EN 1.4404 or equivalent alloy (AISI 316L is the corresponding US standard). NORD-LOCK also offers stainless steel washers in special alloys (see below). All stainless steel washers are surface hardened. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
