|
|
These directional seated valves use spring loaded balls as valve elements and therefore do not show any leakage. They are manifold mounting and are available with various actuations which always act on an angled lever pushing the valve element in the desired switching position.
The basic versions are designed as 2/2- and 3/2-way directional valves. 3/3- , 4/3-way functions are possible, if two valves are housed in one valve body, whereas 4/2-way functions require an additional intermediate plate. The enforced versions G39, G49, G..-22 are intended for pulsating, permanent load with frequent switching operations in the high pressure range.
These valves may be directly installed in pipe systems, when equipped with subplates enabling pipe connection. Many optional functions can be incorporated in these sub-plates e.g. pressure limiting valve or restrictor check valve for widen the field of application for this valve type. Valve banks of these valves are also available featuring several valves
connected in parallel (see type VB).
|
|
Minimum weight. Good price-performance ratio. Spool design. Ready for installation.
For single and double-acting applications, for direct installation to hydraulic units. |
|
| The seated valves are direct operated. The balls which are situated in the cartridge are pressed on the valve seat via springs or are opened via tappets. Hardened balls and valve seats ensure long life. |
|
| The seated valves are direct operated. Depending on the desired control function up to four valve cartridges are used. The poppets which are situated in the cartridge are pressed on the valve seat via springs or are opened via tappets. Hardened poppets and valve seats ensure long life. Pressure compensated poppets reduce the operating power. |
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here. Our engineers' many years of experience and competence guarantee that this requirement is met correctly and in the best possible way.
KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs. |
|
For your stationary hydraulic installation, KRACHT offers a complete programme of hydraulic components: Industrial valves, pumps, cylinders and accessories. One hundred per cent safety of the components in operation and material function is absolutely vital here. Our engineers' many years of experience and competence guarantee that this requirement is met correctly and in the best possible way.
KRACHT employees demonstrate their know how and commitment every time they take decisions regarding the general field of application and the specific use of valve types of completely different designs, and in the case of the in-house construction of cylinders which can satisfy the most demanding requirements. This result in the optimal realisation of special concepts for client-specific needs. |
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
HydraCell piston diaphragm pumps are very compact and low-maintenance. By their almost pulsationsfreie and run-calm mode of operation differ this poetryless pumps substantially from conventional pump systems.
The most promotion and dosing tasks are mastered by rotary pumps, multi-level centrifugal pumps, Exenterschneckenpumpen or diaphragm metering pumps only with a very small efficiency.
VERDER HydraCell pump does not only supply to you with an efficiency of over 80%, but is also a economical alternative to well-known reciprocating and rotary pump systems. The high efficiency our VERDER HydraCell pumps is the crucial factor for the small life cycle costs (LCC). |
|
| ... products without technical information |
| |
| Compact design. With integrated low-pressure switch-off valve and high-pressure pressure limiting valve. Direct installation of motor without bell housing and coupling. |
|
DVQ-25 DURABLE DESIGNED HIGH PRESSURE PUMP
The maximum pressue:250 bar
Displacement:18/22/26/32/38/43/47/52/52/60/65/75
Aplication:
Shoes making machine, Plastic and rubber molding mahcine,
press brake machine, press shear and steel sheet forming machine.
|
|
| ... products without technical information |
| |
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. The mechanically actuated diaphragm reduces the possibility of hydraulic oil contamination of process liquid which makes this an ideal pump for water treatment applications. DC variable speed drives are available for external control and automation.
The SD & SG metering pumps offer a high level of reliability with outstanding value for applications up to 175 psi (12 Bar). |
|
| Maintaining the same size footprint of previous models, the sleek new pump offers a number of product enhancements to provide longer life and product convenience, while the physical design signifies supreme quality. The newly redesigned housing improves the drive’s heat transfer properties, as it generates heat farther away from the electronic components to maintain the long-term integrity of the PC Board. Electrical connector attachments have been repositioned to the front of the pump for easy access. With a new clear cover the face of the pump is shielded from exposure to corrosive substances yet lifts easily for convenient access, allowing operators to view dial settings for fine-tuning output. In addition, the pump and liquid end mounting geometries have been improved for enhanced connections. For more information please contact LMI Milton Roy |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Cryogenic valve valve series 440
DNN (Nominal Diameter): 15-250 (other diameters and pressures on requests)
PN (Pressure rating): 20-100
Valve usable until -196°C and a pressure of 40 bars
TECHNICAL MAIN FEATURES
Standard ANSI
Great dimension
Technology: Moulded
Principle: Valve
Markets:
- Cryogenics
- Oil/gas
Connection:
- Has flanges
- To weld
Type of connection:
- THUS
- BSP/NPT |
|
Piston faucet
DNN (Nominal Diameter): 15-400 (other diameters and pressures on requests)
PN (Pressure rating): 16-420
Faucet used to complete or control in the sectors of petrochemistry, chemistry, with risks of filling
TECHNICAL MAIN FEATURES
Execution: A105, AISI 316, AISI 304
Sealing PTFE or another seal with the request
Can be gone up with all types of actuators
Connection of the actuators according to ISO 5211
Flanges fixing or to weld
Technology: Moulded or Forged |
|
| ... products without technical information |
| |
|
|