|
|
Nominal sizes NG3-Mini, NG4-Mini, NG4-ISO, NG6 and NG10 (flange)
Maximum pressures up to 350 bar
Volume flows up to 100 l/min
Direct operated - and pilot operated versions
Electric, pneumatic, hydraulic and mechanical actuation
Electric actuation by means of switching - and proportional solenoid
|
|
Description and Applications:
- Distributer proportional to direct action with electronics of numerical regulation for adjustment of pressure, force of flow (Integrated Axis To control IAC-P)
- Completely adapted Unit, composed of a distributer, sensor (S) of pressure (in option), numerical electronics of drunk regulation and an interface user.
- Actuation by magnets proportional with central net and winds removable.
- Drawer of the distributer with adjustment of position
- Plate of pressure pick-up integrated (in option)
- For assembly with base plate stackable: gauge of the holes according to ISO 4401
- Analogical Interfaces for instructions and actual values
- Version for Bus EDGE with protocol CANopen DS 408 or Profibus-DP V0/V1
Fast startup by computer PC and logicile of startup WIN-PED 6
Features/performances:
- Nominal Dimension 6 and 10
- Series 2X
- Maximum operating Pressure 315 bars
- Maximum Flow 180 l/min
|
|
|
|
|
|
Features:
Servo-distributers proportional 4/2, 4/3, controlled, without electric regulation of position.
- NG 10,16,25,32
- Series of appliances 7X
- Maximum operating Pressure 350 bar
Maximum flow 1600l/min
Distributers proportional controlled on two floors being used to order the direction of flow and the flow of the fluid.
Order by the valve controls (regulator pressure with 3 ways)
For assembly on base plate: mating plane ISO 4401 -... (Indication according to the nominal size).
Distributer slide valve to centering by spring
Description and Applications:
Remarks relating to explosion-proof protection:
Scope of application according to the Directive on explosion-proof protection and protection
Scope of application according to Directive RL 94/9/EG II2G
Protection of the electromagnet EEx EM IIT 4X according to IN 50019/50028
- Characteristics for distributers resistant to sea water
The metal external parts are treated by green zinking-chromatage olive
This resistance to sea water is defined by the indication of the order "J".
|
|
Nominal sizes NG3-Mini, NG4-Mini, NG4-ISO,
NG6 and NG10 (flange)
Maximum pressures up to 350 bar
Volume flows up to 100 l/min
Direct operated - and pilot operated versions
Electric, pneumatic, hydraulic and
mechanical actuation
Electric actuation by means of switching - and
proportional solenoid
|
|
When you need finished Integrated Hydraulic Circuits with extremely short lead times, the Parker Speed Shop is the place to go. Parker%u2019s expert application engineers, along with the latest computer-aided design and manufacturing technology, can bring new and advanced custom products to market faster, keeping you way ahead of your competition.
|
|
Oilgear has built a reputation upon the superior engineering and unbeatable reliability of our solutions. As a result, our modular and integrated manifold systems are in use worldwide for a wide variety of different applications.
Our understanding of manifold design and manufacturing has allowed Oilgear to innovate many essential advantages such as reduced size, weight, and cost. Our high quality and reliable systems provide a clean and leak free solution to our customers’ most challenging control system problems. By using the latest available software modeling techniques you can trust that your manifold will exceed your expectations, no matter how big or how small.
|
|
|
|
|
|
- Consolidate your hydraulic control system.
- External connections are minimized.
- External leakage is virtually eliminated.
- Reduced installation time and system maintenance.
- 100% circuit logic and function tested.
- New "FastTrak" service for quick delivery of a working prototype block.
Cartridge valves in custom manifolds offer several advantages to the machine designer:
- System manifolds "clean up" machine plumbing. They are designed to meet the needs of the machine, rather than the machine being designed to meet the needs of the fluid power system. Installation costs are usually dramatically reduced.
- Leaks are stopped. Manifolds with O-ring fitting ports eliminate external leakage, which frequently prohibited the use of hydraulics in many applications.
- Downtime and service of integrated circuit manifolds is reduced to seconds. Components can be changed without disturbing plumbing or unstacking tie rod-type hardware.
- Integrated hydraulic circuits can be centralized on a machine, or strategically scattered to optimize plumbing logistics. There is no universally-right method for installation. Cartridge circuits in custom manifolds offer unequalled flexibility.
- HydraForce is both a supplier of custom integrated circuit manifolds and a supporter of our Distributors and customers who design and fabricate their own manifolds.
|
|
PL 25 M, PL 35 M, PL 45 M, PL 55 M and PL 95 M
• Max. flow capacity from 40 up to 120 l/min.
• Working pressures up to 350 bar
PL 30, PL 50, PL 80 and PL 100
• Sectional control valves
• possible to mount up to 10 elements
• Max. flow capacity from 50 up to 150 l/min.
• Working pressures up to 350 bar
|
|
Minimum weight. Good price-performance ratio. Spool design. Ready for installation.
For single and double-acting applications, for direct installation to hydraulic units.
|
|
Proportional directional valves CV
This range of proportional valves is used to provide load-independent speed control of motors and cylinders.
CV (Compac) means: all valves functions are integrated into one compact block.
Advantages
* Monoblock, manifold-mounting valve with 2-way hydrostat (individual compensator)
* Adaptable building-block system
* Individual matching of flow rates
* Primary pressure relief for each actuator
|
|
|
HBM Flow Selector Valve is produced with high quality cast iron and designed for applications where two separate hydraulic circuits, and has 38 to 100 lpm range flow and 250 bar maximum pressure. Manual control operation with three position and three ways spool in single unit (3B Code) and 6 ways in double unit (6B Code),open center options (Code A) and closed (Code C).
|
|
|
|
|
|
Valve proportional with solenoid to technology "loud-speaker" VCD®: A revolution in power and speed
*Conception drawer/shirt.
*Captor of position of integrated drawer.
integrated electronic *Amplificator.
*Force developed by the solenoid > 100N.
*Débits nominal of 3,6,12,25 and 40 [l/mn] (Cetop 3) @ 35 bar from delta p by passage or 50 and 100 [l/mn] (Cetop 5) @ 35 bar of delta p by passage.
*Hystérésis < 0.05%.
Advantages:
*Très high response in dynamics and for maintenance of position.
*Commande bidirectional.
very precise *Contrôle of the positions, speeds and pressures.
*Temps of high-speed answer: < 3,5 ms (Cetop 3); <6 ms (Cetop 5).
*Excellente resolution 1:4800 (2,4 mm/0,5 µm).
*Débits controlled stable even under high pressure loss.
*Disponible for all types of signals of control.
*Bonne resistor with the contamination.
*Meillor controls for all applications.
*Quality of the products manufactured improved (precise valve).
*Réduction of the manufacturing costs by load capacity increased machine (fast valve).
*Prix competitive.
Applications:
*Bancs of test of structure and tiredness.
*Industries of the steel and production of aluminum.
*Machines of injection and blowing.
*Simulateurs.
*Machines-outils.
*Marine.
*Industrie of the wood and production of paper.
*Éoliennes.
|
|
Dispenser VO40
Description:
Modular dispenser in open center. Operation with pump with fixed cubic capacity. Flow max = 40 l/mn
Advantages:
Modularity, maneuverability, repeatability, Ergonomics, stability of operation, compactness, facilitated maintenance
Applications:
Agricultural machinery, carts elevator, small cranes...
|
|
|
|
|
|
P70CP
Pump flow max 90 l/min (23,5 US GPM)
Workpressure max 320 bar (4600 psi)
The P70 directional control valve is of modular construction. It is designed for many different applications and used extensively in machines such as lorry cranes, small wheeled loaders and concrete placing cranes.
The valve can be of the directly operated type, or can be equipped for electric, pneumatic or hydraulic remote control. A combination of direct and remote control is also possible.
The P70 is stackable and can be supplied in combinations of 1 to 10 spool sections, and also in combination with function manifolds.
Low lever forces: give comfortable operation when the valve is controlled directly.
Mid-inlet sections: enable compact system design, even in systems with several pressure levels.
Very wide range of applicationadapted spools: designed to optimise control characteristics.
Our proportional remote-controlled valves have pressure compensated spools: which further improves control and simultaneous-operating characteristics.
Low pressure drops: keep down energy losses and reduce the generation of heat.
Machined land edges in the valve housing: guarantee good control characteristics.
|
|
|
The Directional Control Valve of the rotary spool type consists of a rotor which is rotated with respect to the valve body. When the rotor is placed in selected positions inlet and outlet ports are connected in various combinations permitting the start, stop or directional change of fluid under pressure. The functions specific to a valve depends primarily on rotor type selected.
|
|
|
|
|
|
Product description
- The Eaton® MDG mobile directional control valve is a versatile and modular design based upon the Eaton's proven Vickers™ industry leading DG4V3 design.
- The MDG valve design is a closed center, parallel or series circuit that can also function as an open center circuit through the use of unloading inlet options.
- The MDG valve offers versatility and flexibility in system applications through a sectional design, allowing the use of up to six sections per bank assembly.
- Further, the MDG valve can be configured to create custom, multi-functional circuits through the use of optional banking functions such as inlet and work port options
Benefits & Customer Values
- Modularity - sectional design (up to 6 section per bank assembly)
- Flexibility and versatility - various inlet and work port options
- Mobile design is based upon Eaton's Vickers™ industry leading DG4V3 valve.
- Modular banking design concept eliminates costly fittings and potential leak points
- Meets key OEM specifications regarding temperature, vibration, heat rise/drop, impact test, water dunk (thermal shock and hermetic seal), salt spray, and dielectric strength test.
Specs
- Flows to 60 lpm (15.8 US gpm)
- Rated pressure per NFPA T 2.6.1:
P, A & B: 350 bar (5000 psi)
T: 210 bar (3000 psi)
- IEC 144 class IP67 protection with ISO 4400 coils with plug fitted correctly
IP 65 (standard override) protection with EN490 coil
- Power consumption: 30W for 12V or 24V DC solenoid coils at rated voltage and 20°C (68°F)
|
|
SPOOL TYPE DIRECTIONAL VALVES
Our offer includes a wide selection of Spool type directional valves , whose variety of control ensures a wide range of applications
Moreover, we offer connection plates for all types of distributors and, upon the customer’s request, we take into account additional requirements.
Electro hydraulically controlled valves, depending on the order, may be provided with a switching time controller, a piston stroke restrictor or a limit switch.
|
|
NRV is a series of patented direction control valves made entirely of stainless steel, designed especially for industrial applications where demands on hygienic and compact design are high.
Application :
The NRV valves are designed for water hydraulics systems, but are equally applicable in oil systems.
NRVs are well suited for chemical, food and marine industries as well as under environmentally tough conditions.
|
|
Monoblock directional valves
Sectional body directional valves
Load sensing stackable directional control valves
Electric directional control valves monoblock and stackable
|
|
FEATURES:
- O’RING PORTS to eliminate leakage.
- POWER BEYOND CAPABILITY to fit your multi valve circuits.
- BUILT IN ANTI-DROP CHECK prevents the load from dropping when the spool is shifted.
- FOURTH POSITION FLOAT allows spool movement to a fourth position and makes all ports common to each other (last spool only).
- PRECISION GROUND CHROME PLATED SPOOL that assures long life.
SPECIFICATIONS:
- 18 gpm Nominal Capacity.
- Rated up to 3000 psi.
- Port Sizes
* Inlet/Outlet #12SAE (1-1/16-12).
* Work Ports #10SAE (7/8-14).
- 10 Micron Filtration Recommended.
- Weight
* TS1 = 9 lbs. (4.1 kg).
* TS2 = 14 lbs. (6.4 kg).
* TS3 = 20 lbs. (9.1 kg).
|
|
When you need finished Integrated Hydraulic Circuits with extremely short lead times, the Parker Speed Shop is the place to go. Parker’s expert application engineers, along with the latest computer-aided design and manufacturing technology, can bring new and advanced custom products to market faster, keeping you way ahead of your competition.
|
|
|
|
|
|
FEATURES:
- INDIVIDUAL LOAD CHECK built into each section that prevents the load from dropping when the spool is shifted.
- PRECISION GROUND CHROME PLATED SPOOL that assures long life.
- DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage.
- METERING NOTCHES give smooth control of load.
- ADJUSTABLE HANDLES position handle in any location from 90° up to 90° down.
- SPECIAL MODIFICATIONS are easily made to fit your particular application.
- O’RING PORTS to eliminate leakage.
- PARALLEL OR SERIES flow paths are possible.
- ALL SECTIONS & ASSEMBLIES ARE 100% TESTED includes both internal & external leakage tests & flow tests.
- POWER BEYOND CAPABILITY to fit your multi-valve circuits.
SPECIFICATIONS:
- 12 gpm Nominal Capacity
- 3500 psi (241 bar).
- 400 psi (27 bar) max tank pressure.
- 12 sections max (consult factory for more).
- 10 Micron Filtration Recommended.
- Assembly Torque = 85 inch-lbs.
- Weight -Inlet/outlet = 6 lbs. (2.7 kg).
* Low spool section = 4 lbs. (1.8 kg).
* High spool section = 6 lbs. (2.7 kg).
- Port Sizes
* Inlet/outlet #10SAE (7/8 - 14).
* Work Ports #8SAE (3/4 - 16).
|
|
Special Manual Direction Control Valve MF
Special Manual Direction Control Valve MF is an equipment with easy and quick installation, developed to join the tractor hydraulic system and allowing independent placement relief valve. It can operate under250 bar pressure.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
