|
|
|
|
|
|
Product description
- Eaton Flow Dividers are available in priority, proportional, variable and load sensing
versions with a wide range of standard flow ratings and relief settings.
- Eaton load sensing priority valves provide dependable flow on demand for load sensing steering, braking or other priority functions while allowing excess flow to be used for auxiliary functions.
- These products can be used in virtually any mobile application.
Benefits & Customer Values
- Eaton's global leadership in the Steering Unit is a driver for LS Priority Valves
- Used with fixed or variable displacement pumps, a dynamic signal system increases machine performance and stability.
- LS priority valves available as In-Line or Bolt-On configurations
- Flow dividers can be integrated into other components including gear pumps, limiting the need for additional plumbing.
- These products can be used in virtually any mobile application.
Specs
- Priority Flow Dividers
- Rated pressure up to 195 bar/2800psi
- Rated flow up to 175 LPM/45GPM
- LS Priority Valves
- Inlet & EF pressures up to 310 bar/4500psi
- CF pressure & Max CF relief setting 276 bar/4000psi
- Rated flow up to 240 LPM/63GPM
|
|
Flow-control-valve
Flow-control-valve lor direct mounting. Optional: Flow-control combined with ball-valve Mounting position: all directions Medium: HLP46
|
|
These valves control the reciprocating and rotating speed of hydraulic actuators, A variety of flow control valves including pressure and'or temperature-compensated Mow control valves is available.
Flow Control Valves/Flow Control and Check Valves
These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid). They control the speed of the actuator precisely. The valves with an integral check valve allow a controlled flow and reverse free flow. Repeated resetting can be made easily with a digital readout.
|
|
Types:
P.C. Flow Regulator
P.C. Flow Control
Priority Style P.C. Flow Regulator
Compensator Valves
|
|
MODELS :
V2FIC02 Mounting (subplate)
V2FIC03 Mounting (subplate)
SIZES : 3/8 " TO 3/4"
Max. Pressure : 500 psi(350 bar)
FLOWS : 13 - 29 gpm / 50 - 110 lpm
|
|
A breakthrough lightweight 2multi-port valve that provides high-flow processing in single, duplex or triplex configurations.
Modularly expandable, allowing for the addition of extra tanks to meet increased demand
Elite Smart Start, the most advanced controller on the market today
Certified to NSF-61 standards
Robust, non-metallic design
Unique start signal is easily integrated into complex control systems
Capable of co-current or countercurrent regeneration of ion exchange
High backwash flow rates allow for effective backwashing of filter media.
|
|
APPLICATION:
To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
OPERATION:
Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop.
|
|
|
The Brand, Series 83 is a two port, non-adjustable, pressure compensated, inline flow control, with free reverse flow. The amount of flow is determined by the diameter of the orifice in the compensator piston. The spring and piston are held in place when it is connected to an #8 SAE male fitting. This flow control is inexpensive and gives the customer the ability to change the flow rate by swapping the piston with another that has a different size orifice.
|
|
|
Flow rate control valve for automatic regulation of a constant flow rate in the case of changing supply pressures.
|
|
|
|
|
|
FEATURES:
- DIAMOND LAPPED SPOOL BORE provides consistent spool fit with low leakage.
- O'RING PORTS to eliminate leakage.
- EVERY EFC IS TESTED for shutoff, linearity, max. flow, crack open and pressure compensation.
- STANDARD 3-PORT allows for pressure compensated flow out of the CF and EX ports.
- MANUAL OVERRIDE when electrical power is lost.
- OPTIONAL 2-PORT allows for pressure compensated flow out of CF port.
- OPTIONAL FREE REVERSE FLOW allows fluid to move from the CF port to the inlet.
- OPTIONAL HIGH LIFT RELIEF.
SPECIFICATIONS:
- See flow chart for capacity.
- 3000 psi (207 bar) rating.
- Weighs 8-1/2 lbs. (3.9 kg).
- Standard Port size #12SAE (1-1/16 - 12).
- 10-Micron Filtration Recommended.
- Pulse Frequency (90 to 115 hz).
- Coil
* 12 VDC standard (24 VDC).
* 9.6 ohms (48 ohms).
* 15 watts (15 watts).
* 1.0 amp max (0.5 amp max.).
- Response Time.
* 0.035" Standard dash pot (375 ms).
* 0.020" Dash pot (900 ms).
* 0.093 Dash pot (175 ms to 350 ms depending on flow).
- Spool leakage (50 ml/min. @1000 psi on EX port).
|
|
- Adjustment Options for FC, FR, NV, MR Series Valves (Tech. Ref. Info.)
- Needle Valves and Rotary Flow Control
- Flow Controls, Free Flow
- Flow Regulators, Pressure-Compensated, Fixed Setting
- Flow Regulator, Restrictive, Adjustable
- Flow Regulators, Pressure-Compensated, Priority Bypass, Fixed Setting
- Flow Regulators, Pressure-Compensated, Adjustable
- Flow Regulators, Fixed Orifice, Bi-Directional
- Flow Controls, Bypass, Adjustable Orifice
- Flow Regulators with Pressure Relief
- Pressure Compensators
- Pressure Compensators, Load Sensing
- Flow Dividers / Combiners
|
|
The valve is well suited for transferring and evacuating liquid, quantitative dispensing, and the flow range can be controlled.
Technical Features:
1. Uncontaminated flow.
2.Compact size.
3.Adjust flow range precisely.
|
|
| ... products without technical information |
| |
APPLICATION:
To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
OPERATION:
Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it.
|
|
APPLICATION:
To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the main orifice make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top.
OPERATION:
Valve opens when energized and closes when de-energized. In this direct acting valve the disc holder assembly is lifted from its seat by the plunger.
|
|
|
|
|
|
The Magna Flow Control Valve with an easy to read micrometer dial offers an amazing 1100 precise set points to accurately control flow of gases or liquids. The extremely high CV of the Magna Flow control valve enables very high flows for whatever media is being controlled, up to 200 PSIG pressure or full vacuum. Linear flow characteristics provide easy to set and precise metering of gases and liquids for almost any application where accurate results are required.
Available in either light weight impact resistant nylon or clear polycarbonate construction, the Magna Flow Control Valve offers superior strength and corrosion resistance, making it ideal for use in hundreds of different applications. Simplicity of construction, with removable top and bottom caps, provides easy disassembly for cleaning or maintenance without removing the valve from service. Proven O-ring seals provide a positive zero tight shut-off. Replacement of seals, if required, is quick and easy because disassembly is simple and fast. The Magna Flow Control Valve offers all these features at a very affordable price.
|
|
|
Masoneilan's 31000 Series control valve is a PFA lined assembly designed for corrosive applications. It features an eccentric rotary plug design that provides tight shut off and low dynamic forces.
|
|
Description:
The Becker Series CVE & 41005 Globe Valve Regulator’s innovative design makes it among the most versatile natural gas contral valves in the world. Its cage-guided design utilizes multi-interchangeable trim styles, eliminating the need to change body styles. The Becker Globe valve is available with balanced or un-balanced trim for natural gas regulating applications such as pressure and flow control. Body styles provide a choice of flanged, buttweld, or threaded valve end connections.
|
|
Hayward Needle Valves are used for accurate metering of fluids. Turning the thumbwheel moves a tapered piston into the PTFE seat to control the flow down to a few drops per minute. Precision molded,fine pitched stem threads permit this very fine metering flow control.
|
|
21000 Series
Masoneilan's 21000 Series control valve is a heavy top guided globe valve design featuring noise attenuation and anti-cavitation trim options. It is the most versatile single ported control valve on the market today, well suited to handle a wide variety of process control applications.
41005 Series
Masoneilan's 41005 Series control valve is a cage-guided globe valve design with balanced trim configurations. This product line is engineered to efficiently handle demanding process conditions, including applications with high-pressure drops and large temperature variations.
|
|
31000 Series
Masoneilan's 31000 Series control valve is a PFA lined assembly designed for corrosive applications. It features an eccentric rotary plug design that provides tight shut off and low dynamic forces.
35002 Series Camflex
Masoneilan's 35002 Series is the original "universal" control valve, featuring a low friction eccentric plug design, providing excellent throttling control within an extremely compact assembly. The standard design includes an integral bonnet, a direct mounted actuator, and fully enclosed positioner linkage.
|
|
Emerson's ACK check valve is a normally closed magnetic check valve that prevents reverse refrigerant flow in liquid lines and compressor discharge lines.
The ABV Refrigeration Ball Valve isolates suction, discharge, and liquid line pipework during maintenance shutdown periods.
|
|
|
|
|
|
Style 175 GTO Gas Valve
- Permanently lubricated at the factory for maintenance-free service
- Low operating torque - No plug "freezing"
- 100% shut-off; 360 turn or 90 Open Left operation
- Features a superior tamper-proof design
- No leakage to the atmosphere
- One valve covers full pressure range
Designed to meet the requirements of ANSI B16.33 1981, the Dresser Style 175 GTO Gas Service Valve incorporates the same complementary sealing principles as the Style 175 meter curb valve, yet offers a rated working pressure to 175 psig. Each GTO valve is 100% factory-tested at high and low pressure while in a clear non-corrosive fluid.
Just as the Style 175 meter curb valve, the GTO is assembled at the factory and sealed against tampering by a spring loaded stainless steel retaining ring which cannot be removed with ordinary tools. It is tamper proof as specified in D.O.T. 192.363 Part C.
A plastic ring inserted between the retaining ring and bonnet, plus permanently lubricated port seals, assure low, uniform operating torque, preventing the plug from freezing to the body.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
