|
|
Air Oil Separators
Our full range of traditional wrapped and pleated media separators deliver high filtration efficiency and longer life, plus boast greater energy efficiency too.
|
|
The MAHLE oil mist collector unit LGA 600 is a high performance oil mist collector unit for the separation of coolant from tooling machine exhaust air.
|
|
|
|
|
|
With over 3000 air/oil separator designs for compressors, Mikropor is one of the leading air/oil separator manufacturers in the world today.
The primary purpose of Mikropor air/oil separators in rotary screw and vane type air compressors is to separate oil from compressed air. Mikropor separators trap oil by allowing it to coalesce and drain down to a sump - while allowing compressed air to pass through. From the sump, oil will be removed by a scavenge line of some type and returned to the reservoir to be recompressed in a continuous cycle.
Mikropor separators are constructed of a depth loading media and have excellent oil removal capabilities that provide vital air/oil separation required in high-performing compressor systems. Mikropor separators have an oil removal rating of 1-2 ppm (parts per million) - so the oil loss in a compressor working with Mikropor air/oil separators is negligible.
Mikropor separators feature a unique Helix Tube Construction that provides added strength and collapse resistance.
In addition, some special Mikropor separators use fluted - not punched or perforated - steel. The flutes provide a diagonal air/oil flow and improve the coalescing performance of Mikropor separators over competitive products. This fluted steel design unique to Mikropor.
|
|
Coalescing Filter
M26
Features
• Manual Drain
• 0.01 Micron Rated Filter Element
• Quick-disconnect Bowl Guard with Integral Plastic
Bowl and Safety Latch
• Differential Pressure Indicator
Coalescing Filter
M21
Features
• Manual Drain
• 0.01 Micron Rated Filter Element
• Quick-disconnect Bowl Guard with Integral Plastic
Bowl and Safety Latch
• Differential Pressure Indicator
|
|
Applications
MANN+HUMMEL filters for compressed air systems ensure consistent performance of compressed air systems and systems installed downstream. They help to maximise the service life of all filters in the system.
Advantages
The advantages are
low oil and energy consumption
low wear in the compressed air system
custom-made solutions
different designs: air/oil separators, air-oil separator boxes, deep-bed filters, air/oil separators for vacuum pumps
|
|
Air compressors, widely used throughout industry, can produce considerable amounts of oil-contaminated condensate. This contamination must not be discharged directly into open drains, public sewers or natural watercourse.
Oil quickly reduces the dissolved oxygen content of water, which sustains animal and plant life and the bacteria essential for the aerobic digestion of sewage in Water Treatment Plants. As a result, most countries now have environmental laws placing strict limits on the discharge of industrial effluent containing oil.
The low cost, effective solution is a SAO oil/water separator from General Air Products. Installed as part of the compressed air system, it simply reduces the oil concentration in the condensate to permitted levels, so that clean water condensate can discharge safely into the drains. This leaves a relatively small amount of concentrated waste oil to be disposed of by the most economic of legitimate means.
|
|
| ... products without technical information |
| |
- Designed for system clean-up
- 500 hours salt spray protection
- high capacity acid retention desiccants
- shortest system cut-out lengths allow installation in tight areas
- Low pressure drop-highest effective filter area
- Two access valves simply pressure drop measurement
- solid copper sweat fittings
|
|
- Specifically designed for recovery and recycling.
- Prevent costly damage by filtering contaminants out of the refrigerant before it enters the unit.
- UL Listed and CSA Certified.
- Maximizes removal of solid contaminants to include aluminum and iron particles, copper and iron oxides, metal chips, varnish, burrs, flux and dirt.
- Female connection on the PF-052MF has been extended to eliminate difficulties with valve handles and hose connections.
- Contact Parker for other available fittings.
|
|
The range of filter driers cover both hermetic filter driers and filter driers with exchangeable core.
The hermetic filter drier is delivered with various functions: standard filter drier, bi-flow filter drier, combi filter drier and burn-out filter drier.
For the filter drier with exchangeable core the program cover: standard core for CFC / HCFC, standard core for HFC, burn-out core and mechanical filter. The filter drier housing is available with 1 to 4 cores.
|
|
| ... products without technical information |
| |
|
|
|
|
U.S. Air Filtration can provide dust collector filters (liquid filter bags) for all types of liquid filtration systems. We offer a complete line of replacement and custom designed dust collector liquid filters to fit most manufacturer filter bag housings.
Our liquid filter bags are carefully fabricated and sized to ensure ease of installation and change-out. Liquid filter bags are available from 1 to 1500 microns to suit your application. Standard felt bag materials include polypropylene, polyester, nylon, nomex, or absolute rated polypropylene micro-fiber material. Mesh bags are constructed of nylon monofilament, polypropylene monofilament, or polyester multi-filament material. For high purity applications we offer FDA compliant PolyMicro® BOS series bags which have seamless construction, graded density media, and the patented Polyloc® ring which provides a hermetic seal between bag and housing. In addition to edible oils and other food and pharmaceutical applications, liquid filter bags are also ideal for use in semiconductor and cosmetics manufacturing.
|
|
| ... products without technical information |
| |
|
|
|
|
SCF-F plug & play filter units; optimise your extraction hood and multiple arm system.
Euromate offers a variety of filter units - mobile, stationary and central filter units - for any air volume you need to cover. All units are developed to filter welding fumes and dust very effectively. The latest filter units are the self-cleaning central filters with an integration extraction fan (SCF-F 2 with two filter cartridges and SCF-F 4 with four filter cartridges); developed in accordance with the latest international electrical standards.
The SCF-F series have been developed to meet the demand for plug & play filter units to support small and medium-sized extraction hoods and multiple arm systems with up to 7 extraction arms.
The main feature of the SCF-F is the outstanding cleaning technology of the filter cartridges. The self-cleaning mechanism ensures that the filter stays efficient and has a longer lifespan.
Besides that the SCF-F 4 features a programmable intelligent control with a frequency inverter as standard. The unit will adapt to specific needs and controls the air volume automatically; the result: a reliable and constant filter performance.
The frequency inverter has a very positive effect on the lifespan of the filter cartridges. In addition substantial energy savings up to 40% can be achieved; keeping the overall operating costs extremely low.
BENEFITS: plug & play, reliable and constant filter performance, low operating costs, efficient airflow control, energy savings up to 40% and solid construction.
|
|
Independent power
These stand-alone industrial air cleaners with cleanable electrostatic filters can extract welding fumes from the local atmosphere even when extraction close to the source is not possible. The HFE 25 has a capacity of 2,500 m³/h and the HFE 50 up to 5,000 m³/h. Naturally, the HFE 25 and HFE 50 also take out other pollutants such as fine dust.
Also suitable to extract oil mists after installing the appropriate pre and final filters and oil drainer.
|
|
|
|
|
|
The “original” Smokeeter, pronounced “Smoke Eater,” is United Air Specialists' most well-known commercial indoor air cleaner. Most commonly used in bars, restaurants, bowling alleys, office buildings and other public facilities, the Smokeeter is the best electrostatic precipitator in the industry. These units can be installed on the ceiling or mounted on the wall, as well as concealed above the ceiling.
Features & Benefits
Ionizer*—Electrostatically charges particles.
Collection Cell*—Captures charged contaminants to rid them from your business’ environment.
Pre-filter—Optional layered aluminum mesh screens capture large airborne particles as they enter the unit.
After-filter—Optional activated carbon after-filter helps control odors.
Indicator Light—Illuminates when unit is working properly and automatically shuts off when components need routine servicing.
Multi-Speed Control Switch—Provides variable blower speed adjustments to control noise levels during peak and off-peak business hours.
|
|
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules.
|
|
Ahead of its competitors
Euromate's MFD mobile welding fume extractor with its 50 m² DuraFilter® is ahead of its competitors on all fronts. The disposable cartridge filter has been especially developed to filter welding fumes and its special construction gives it some very exceptional characteristics. This gives the welder a strong and, most important, a constant extraction over a very long period of time. The DuraFilter® has a life that is many times longer than ordinary cartridge filters. This reduces operating costs drastically. Welding fume extraction from the work area with the MFD, with all its advantages, offers reliability and is cost effective.
|
|
|
PHV - PORTABLE welding smoke withdrawal system - clean air for a safe and healthy work surrounding field the PHV von PlymoVent is a user friendly, portable and mobile plant for efficient welding smoke exhaust at the source. Compactly and easily, simply in that. Above all suitably for light and normal weldings on the spot, in small areas or in difficult places. The PHV switches on by your mechanism automatically, as soon as one welds. It has 2 engines and two performance levels. The main filters has a surface of 12m ², which provides for long intervals without filter changes. The separated dust can be disposed together with the filter dust free. The welding smoke arrives to an aluminum prescreener in the main filters “Dura H®” over a metal before separator and. Subsequently, by means of a “EHEPA” filter a separator degree is reached of 99,9%. Between main and Nachfilter additionally an activated charcoal filter can be used.
|
|
The Smog-Hog PCN mist collector eliminates welding smoke and other metal oxide fumes from employees’ working zones. Situated inside a factory, this portable electrostatic air cleaner can easily move to reach all areas of your factory. This unit is ideal for situations where large hoods are impractical, smoke-producing machinery is used intermittently or an employee moves from one work station to another.
Air volumes range from 700 CFM to 1,200 CFM.
|
|
|
|
|
|
The smart solution without ductwork
Diluter systems are the solution, when source extraction and hoods are not an option when large pieces of metal are fabricated, various welding processes take place at continuously changing locations and ductwork is difficult to install. The Diluter system has been designed especially for light to medium welding processes.
Flexible solution
Installing the Diluter system is easy as you do not need any ductwork. It does not only save ductwork (thus labour) costs, it is also a very flexible solution for facilities with many welding processes, changing locations constantly. The Diluter system suits almost any workshop.
Minor investment maximum result
The Diluter system consists of three main components: the filter unit, a fan and the Diluter itself. The Diluter is an air circulation unit with six multidirectional outlet nozzles. The unit re-circulates the cleaned air into the workshop by means of the outlet nozzles. The nozzles can be rotated to optimise extraction.
The airflows from the nozzles can be controlled individually making the system unique. Positioning the nozzles inside the welding fume layer gives the best result (usually between four and six metres). The main benefit is the relatively small investment for controlling welding fumes in your plant.
|
|
|
|
|
|
High-level control of welding fumes
Push-pull systems are the solution when source extraction and hoods are not an option, such as working areas with crane transportation, plants where large pieces of metal are fabricated (and arms are impractical) or workshops where various welding processes take place at continuously changing locations. The push-pull system has been designed especially for heavy industry.
Control your background concentration
Welding fumes rise due to heat. At a certain level – due to the cooling process - the same temperature level will be reached and a fume layer arises. The push-pull system moves this layer in a controlled way at a particular height (usually between four and six metres) where the air is being filtered and re-circulated. This way the smaller particles cannot cool down and return to working level. Which means: less fine dust on your work floor.
Ductwork, the main aspect
The main aspect of the push-pull system is the ductwork. Ductwork can be installed in all kinds of settings, U-shaped or paralleled. To determine the most effective system for your surroundings, you need to consider all aspects; the welding process, the height at which the welding fume layer develops, overall volume and the general construction of your workshop.
BENEFITS: optimum control, prevents accumulation of welding fumes, less fine dust at your work floor, heated air stays within the workshop, thus energy saving, suits almost every heavy industrial working environment.
|
|
|
|
|
|
Downdraft Table / Workstation
The Filter 1 Benchtron Downdraft/Backdraft Workstation removes dust, fumes, and smoke from sanding, grinding, buffing, or welding of metals, composites, fiberglass, plastics, or wood. The Benchtron meets OSHA requirements for respirable dust down to .05MG/M3, with adjustable suction velocities of 150 to 800 FPM in the "working zone." High efficiency filters remove 99.9% of all particles 1/2 micron and larger. The unit features automatic self-cleaning, flourescent lighting, and the Regain Air, "Push/Pull" technology pioneered by Filter 1 to provide a blanket of clean air in the "breathing zone."
The standard design includes a 3 phase TEFC motor with starter and rubber vibration mount, a magnahelic guage, and sound insulation to less than 78 db. The Benchtron is available in configurations of one work surface or two, for sitting or standing.
Options
- Custom Sizes to Fit Your Application
- Carbon After Filters
- Odor Absorption Modules
- Sound Attenuators
- Work Surface Grating: Wood, Metal, Galvanized, Stainless Steel, Non-scratch Fiberglass, or Rubber
- Various Hole Size Grate
- ASHRAE or HEPA Safety Filters
- Safety Monitor Gauge and Alarm
- Spark Trap for Welding or Heavy Grinding
- Various Filter Media for Special Applications
|
|
Hydrotron DHYD Series: Wet Type Dust Collector / Downdraft Table
The Filter 1 Hydrotron Downdraft Table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It features easy installation and comes ready to run. The workstation is available with a single work surface or with two work surfaces, one on each side.
The Hydrotron gets the dust immediately wetted, reducing the risk of fire in ductwork and meets OSHA and NFPA regulations for dust collectors located inside the building. The standard unit includes a fiberglass grated work surface, a Regain Air Curtain in front to prevent dust from escaping the work zone, and a clear inspection door.
Options
- Regain Air System
- Stainless Steel Construction
- Overflow/Low Water Cut-off Switches
- Explosion Proof Motors
- HEPA Safety Filters With Alarms
|
|
|
|
see the results for the following category : 
