|
|
CONDENSATE CLEANER ACR 4
Motor capacity (HP/kW) 50
Condensate connection (input, '') 4 x 1/2
Water connection (output, ") 1 x 1
Oil connection (output) 1
Oil can (l) 5
Working temperature (min./max., ºC) 5 - 60
Dimensions (l x w x h, cm) 96.5 x 60 x 38
Weight (kg) 22
Ordernr: Code
36065 B
|
|
|
|
|
|
The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems.
The Model 8 utilizes a continuous belt and wiper to remove up to 40 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt and discharged.
Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model 8 can be used in tanks with depths as shallow as one foot, or as deep as 100 feet.
Advantages
- A single unit elevates and separates oil
- Lifts oil any distance without the need of expensive pumps
- Maintains skimming efficiency with fluctuating fluid level
- Can be used in depths as shallow as one foot, or as deep as 100 feet
- Requires no tank modifications in most applications
- Operates in turbulent liquid using optional tail pulley cage and tether assembly
- Easy mounting and fast cleaning, with minimal maintenance
|
|
|
|
|
|
Oil Grabber® Model 4
The Abanaki Model 4 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 4 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems.
The Model 4 utilizes a continuous belt and wiper to remove up to 20 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt and discharged. The tail pulley has flanges which allow it to roll freely on the inside of the belt without becoming dislodged.
Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model 4 can be used in tanks with depths as shallow as one foot, or as deep as 100 feet.
Advantages
- A single unit elevates and separates oil
- Lifts oil any distance without the need of expensive pumps
- Maintains skimming efficiency with fluctuating fluid levels
- Can be used in depths as shallow as one foot, or as deep as 100 feet
- Requires no tank modifications in most applications
- Easy mounting and fast cleaning, with minimal maintenance
|
|
|
|
|
|
CJC™ Desorbers are patented products designed to remove water from oil types which either bind and emulsify water or are high viscosity oil (up to ISO VG 1000). CJC™ Desorbers are ideal for use in applications in which water ingress is a continuous and significant problem, whether for lubrication oil, gear oil or hydraulic oil.
CJC™ Desorbers heat oil slightly before it meets a counter flow of cool air in the desorber housing. Air heated by the oil expands, drawing water from the oil. The subsequent air-cooling condenses the water and the dry air is re-used for removing water from incoming oil.
CJC™ Desorbers remove water from all kinds of oils effectively and reliably. The results are measurable benefits that include fewer unscheduled production stops, increased system component lifetime, increased productivity and fewer oil changes.
The CJC™ Desorbers product range is flexible and scaleable, suitable for oil systems containing only a few litres of oil as well as systems with up to 50,000 litres.
CJC™ Desorbers are well known for ensuring trouble-free operation of oil systems in steel mills, paper mills and more.
|
|
The new and extensive OSC range from Atlas Copco uses patented technology to separate all kinds of compressed air condensate.
The multi-stage separation process, using both buoyant oleophilic filters and activated carbon, ensures exceptional performance, long and proven filter lifetime and trouble-free operation.
All separators are manufactured in accordance with Atlas Copco's Quality and Environment Management System. These systems comply fully with ISO 9001 and ISO 14001. All Atlas Copco separators are tested to perform under the most demanding conditions.
- Inlet capacity: 35 to 2360 l/s, 75 to 5003 cfm
- Filtration: oleophilic and activated carbon filters
- Oil content: less than 15 mg/l
|
|
In order to prevent paraffin separation and clogging of the filter at low ambient temperatures, pre-warming with electric heating elements or recirculation of fuel that has been warmed by the engine is used in our fuel filters.
For newer generations with even higher requirements, MAHLE has opted for two separate filter stages during water separation.
The first filter phase consists of a cellulose filter medium with an untreated melt-blown contact surface for increasing the contaminant absorption capacity. This melt-blown contact surface optimally causes the many small droplets to coalesce into larger ones. The particulate filter in the shape of a pleated star even agglomerates the finest water droplets.
The second filter phase consists of a water separator, whose hydrophobic fabric with a mesh width of 25 µm divides the barely stable emulsion, thus separating the water. As this occurs on the clean side of the filter, it is referred to as clean-side water separation.
|
|
|
|
|
|
Oil Grabber® Model MB
The Abanaki Model MB Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model MB alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with a coalescing system.
The Model MB utilizes continuous belts and wipers to remove up to 200 gallons of oil per hour from the fluid surface. The belts, operating on a motor and pulley system, run through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belts pass through tandem wiper blades where oil is scraped off both sides of each belt and discharged. The tail pulleys have flanges which allow them to roll freely on the inside of the belts without becoming dislodged. These lower pulleys require no bearings and do not need to be fastened to the tank. If turbulent conditions exist, an optional tether and cage assembly prevents the tail pulleys from being dislodged.
Features
- Requires only a small area in the tank or sump
- Easy mounting
- High temperature capability
- Chip resistant powder finish
- Hazardous duty and food grade options
- Custom designs and turnkey systems available
- Fast cleaning with minimal maintenance
|
|
|
The FOD oil/water separator is simple to install and use, and does not require electrical powering.The oil is separated through a multistage filtration process. The oil is absorbed by special absorbent substances inert to water which, once saturated, are removed and managed in the same way as normal oil removal filter cartridges. At the end of the process, the condensate can be discharged into the sewage system in compliance with prevailing local regulations.
|
|
EPG Companies Inc. OS Series Oil Water Separators are designed to produce an effluent concentration of 10 mg/l or less of oil droplets 30 micron and larger of non-emulsified, sheen free, free and dispersed oils. By virtue of the FLOPAK coalescing media, readily settable solids can be removed.
Fiberglass Construction:
- Dion Resin Construction
- Integral Bonded Fiberglass Fittings
- Hopper Bottom For Solids
- Integral Oil Storage Chamber
- Integral Expandable Effluent Chamber
- One Piece Removable Cover
- Quick Release Cover Hardware
- Industrial Grade PVC Cover Gasket
- PVC Constructed Oil Skimmer
Steel Construction:
- Carbon Steel Construction
- Hopper Bottom For Solids
- Integral Expandable Effluent Chamber
- One Piece/Sectional Removable Cover(s) with Hold Down Hardware
- Coal Tar Epoxy Internal Coating
- External Epoxy Coating
- Industrial Grade PVC Cover Gasket
- PVC Constructed Oil Skimmer
|
|
Air compressors, widely used throughout industry, can produce considerable amounts of oil-contaminated condensate. This contamination must not be discharged directly into open drains, public sewers or natural watercourse.
Oil quickly reduces the dissolved oxygen content of water, which sustains animal and plant life and the bacteria essential for the aerobic digestion of sewage in Water Treatment Plants. As a result, most countries now have environmental laws placing strict limits on the discharge of industrial effluent containing oil.
The low cost, effective solution is a SAO oil/water separator from General Air Products. Installed as part of the compressed air system, it simply reduces the oil concentration in the condensate to permitted levels, so that clean water condensate can discharge safely into the drains. This leaves a relatively small amount of concentrated waste oil to be disposed of by the most economic of legitimate means.
|
|
|
|
|
|
CJC™ Filter Separators are off-line oil filtration systems, combining fine filtration with water separation all in one unit, with an integrated circulating pump. They are designed for use in applications containing hydraulic oil, diesel fuel, lubrication oil, etc., in which water ingress is a constant or recurrent problem.
CJC™ Filter Separators remove water by coalescence and at the same time minimize oil contamination levels of particles and oil degradation products (oxidation resin/sludge, varnish).
The CJC™ depth filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
This, combined with efficient and continuous water removal from the oil, provides numerous benefits including reduced maintenance, increased productivity, and maximum lifetime of system components, in-line filters and oil.
The modular Filter Separators are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
CJC™ Filter Separators ensure trouble-free operation of marine hydraulics, marine diesel fuel systems, steam turbine lube systems and water-cooled hydraulic industry equipment.
|
|
|
All separators are manufactured in accordance with Atlas Copco's Quality and Environment Management System. These systems comply fully with ISO 9001 and ISO 14001. All Atlas Copco separators are tested to perform under the most demanding conditions.
|
|
Inlet capacity: 35 to 2360 l/s, 75 to 5003 cfm
Filtration: oleophilic and activated carbon filters
Oil content: less than 15 mg/l
|
|
Compressed air condensate generally has far more oil than
20 mg/l content. The user has two possibilities.
Firstly, he can have the condensate taken away by a specialist waste disposal firm at great cost. Alternatively, the user can process the condensate on site by separating the oil and the water, which forms the largest
proportion.
ZANDER’s ecosep S high efficient oil-water separator and
the ecodrain automatic drain, offer compressed air users a
complete condensate management system to achieve an oil content, in water of 10 mg/l or below which can be discharged into the effluent system.
-ecosep SL 1 - SL 60
Separating system for non emulsified compressor condensate. Usable to connect several condensate drain systems. The adsorption charcoal filters adsorb the remaining oil droplets and garant high safety in application.
Standard complete and ready for operation.
Optionally a heater is available.
|
|
OSC - Advanced technology for all compressed air condensates
The new and extensive OSC range from Atlas Copco uses patented technology to separate all kinds of compressed air condensate.
The multi-stage separation process, using both buoyant oleophilic filters and activated carbon, ensures exceptional performance, long and proven filter lifetime and trouble-free operation.
All separators are manufactured in accordance with Atlas Copco's Quality and Environment Management System. These systems comply fully with ISO 9001 and ISO 14001. All Atlas Copco separators are tested to perform under the most demanding conditions.
Inlet capacity: 35 to 2360 l/s, 75 to 5003 cfm
Filtration: oleophilic and activated carbon filters
Oil content: less than 15 mg/l
|
|
|
The ELF Coalescer is a simple, virtually maintenance-free system for separating oil from steam condensate. Utilizing a bed of oleophilic ion exchange resins, the ELF Coalescer can be used in petroleum refineries, petrochemical plants and related industries as well as treating ballast water, oil well field produced water and other oily waste waters.
|
|
Fuel/Water Separator Element
Case-IH, New Holland Tractors
Descriptions: Primary Fuel/Water Separator Element with Removable Drain
Fits: Case, Case-IH, New Holland Equipment
Replaces: Case 87803445; New Holland 87803444
O.D.: 3 1/2 (88.9)
I.D.: 1 5/32 (29.4) One End
Length: 5 3/4 (146.1)
Grommets: [1] Attached
UPC: 7 91440 08177 2
|
|
Coalescer units
These can be vertical or horizontal vessels with connection sizes up to 48" (1200 mm) NB using the properties of droplet attraction, impingement and coalescence to remove liquid droplets from fluidic streams.
Coalescers are available to separate water and condensates from gaseous hydrocarbons such as natural gas and fuel gas, as well as from ammonia and nitrogen and for both onshore and offshore activities. Also available are coalescers and separators to remove water from liquid hydrocarbons such as diesel, fuel oil, kerosene, some crude fractions.
In all cases the coalescers can be supplied complete with integral filter packs to provide long term in-service life.
Specialist coalescers are available for the separation of difficult to separate duties or where a corrosive main phase fluid is present.
|
|
The coalescer has been especially designed to remove free water from hydraulic circuits. Costeffective and simple in design, it functions without absorption material: special filter material in special configuration retains the small water droplets floating in the medium and removes them.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
