Diameter: 10 mm - 100 mm
... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK ...
KROMA MEC SRL
KROMA MEC SRL
Diameter: 0.25 in - 4 in
Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
KROMA MEC SRL
Operating pressure: 0 bar - 15 bar
C.Matic S.p.A.
Operating pressure: 25 bar
The CX is a “push on“ fitting made of AISI 316L, completely free of Orings since conceived for heavy duty applications involving high temperatures, aggressive fluids and where also FPM Oring would not be suitable.
C.Matic S.p.A.
Diameter: 4 mm - 14 mm
Operating pressure: 18 bar
... bottom of the fitting, the stainless steel collet grips onto it and the tube is held captive. It is then enough to press on the release ring to set the tube free from the fitting. Technopolymer Push-in ...
C.Matic S.p.A.
Diameter: 40 mm - 1,600 mm
... wide range of flange fittings for almost every application includes single flange fittings F, double flange fittings FF, double flange bends FFK 11–45° and Q, flanged duckfoot bends N, ...
Düker GmbH
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
MID - VARIACOR
Diameter: 16 mm
Operating pressure: 12 bar
The connection freely directional DynaVariacor helps you to fill the tank! Softens and makes handy the pipes semi-rigid of the petrol stations. Reduce the efforts, increases the manoeuvrability of the nozzle. Avoid the inopportune ...
MID - VARIACOR
Diameter: 25 mm - 65 mm
Operating pressure: 20, 40 bar
Make your fire interventions more comfortable , your progress on ground more efficient ... Increases pliability of fire hose, less effort due to hose rigidity, Makes easier using fire hose in hard to access area, Reduces step ...
MID - VARIACOR
Rubber Lined Pipes and Fittings Rubber Linings are a premium form of corrosion protection for some of the most severe chemical and abrasive environments. We have a wide range of rubber compounds in Natural and ...
Diameter: 4.6 mm - 22 mm
ELSA push-in fittings offer a safe solution for every connection. Their versatility, flexibility and durability ensure maximum effectiveness. The push-in technology enables maximum time savings through fast maintenance ...
RAPID fittings made of stainless steel or nickel-plated brass are suitable for connecting plastic tubes. These fittings are used for very soft tubes, vacuum applications, liquid applications or where ...
Diameter: 6, 4, 8 mm
Operating pressure: 0 bar - 20 bar
The dead space free push-in connector with innovative sealing concept Absolute hygiene and highest performance – this is what makes the AVS Römer hyperfit convincing. The innovative sealing concept without dead space enables fast, simple ...
... adapt a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...
The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to ...
Rohrback Cosasco Systems
Material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...
LMP-fluorcarbon
... convectors. Only one fitting is needed for most installations for adequate diversion for upfeed radiation. For most applications, a second fitting can be used if higher resistance is required Copper ...
Diameter: 12 mm
Operating pressure: 250 bar
Application area Meiler automotive engineering Connection 1 metric cylindrical inner thread Sealing form 1 for screw-in pins with shapes A, B and if necessary E Material Steel Surface electro galvanised ...
HANSA FLEX AG
Diameter: 4 mm - 38 mm
Operating pressure: 160 bar - 450 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Residual pressure Coupling ...
HANSA FLEX AG
Diameter: 4 mm - 25 mm
Operating pressure: 250, 300, 225 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Standard ISO 7241 series ...
HANSA FLEX AG
Diameter: 0.75 in
Operating pressure: 5.17 bar
Brass Stamped Female Hose Nut to Machine Hose Barb Swivels Description: Ideal for use with any standard 3/4 in. (20mm) garden hose. Swivel allows hose to spin freely of the threaded connection to prevent accidental disconnection and ...
Watts Water Technologies
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
... C • - Max Température Ts :+ 180°C • - Max Pressure Ps : 20 bars RANGE : • - From DN 1/8* to DN 4a • - ASTM A351 CF8M fittings excepted for Ref.2034. 2038. 2039. 2040. 2041 and 2042 in SS ASTM A182 F316
SFERACO
Diameter: 2 mm - 35 mm
Operating pressure: 250 bar
- easy and fast to install - compact size - extensive range - many combination possibilities M = connection nut with metric thread (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2), surface ist pickled Nominal pressure ...
Diameter: 4 mm - 15 mm
Operating pressure: 125 bar
easy and fast to install - compact size - extensive range - many combination possibilities G = connection nut with British Standard Pipe (BSP) threads (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2) , surface is ...
Diameter: 6 mm - 18 mm
Operating pressure: 400 bar
Characteristics, specialities • high pressure resistance • easy, robust assembly due to tightening limitation • corrosion resistant • compact design • very good resistance to vibration Material Stainless steel 1.4571 (≈ 316 Ti), alloy ...
Diameter: 0.04 in - 1.5 in
Offering protection from flammability, high heat, abrasion, and chemicals. Alpha tubing has the size for your wire and cable routing needs.
Alpha Wire
The IECEx-ATEX approved fittings type RNA / RAA are developed to protect one unarmoured / armoured cable (single core or multicore) with a liquid tight flexible metal conduit in potentially explosive atmospheres (ATEX). ...
Anamet Europe
Diameter: 7 mm - 30 mm
The IECEx-ATEX approved fittings type RNA / RAA are developed to protect one unarmoured / armoured cable (single core or multicore) with a liquid tight flexible metal conduit in potentially explosive atmospheres (ATEX). ...
Anamet Europe
Diameter: 8 mm - 30 mm
The IECEx-ATEX approved fittings type RNA / BAA are developed to protect one unarmoured / armoured cable (single core or multicore) with a liquid tight flexible metal conduit in potentially explosive atmospheres (ATEX). ...
Anamet Europe
CROSS PIECES Cylindrical thread 4 x inside thread
Diameter: 10 mm - 54 mm
Straight Fitting - Fixed External Thread Description: For insertion into threaded entries & knockouts. Locknut supplied with METRIC THREAD ONLY Material: Polyamide (Nylon) 66 IP Ratings: IP66, IP67, IP68, ...
ADAPTAFLEX
Diameter: 4 mm - 25 mm
... production of fittings. They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings ...
Please specify:
Help us improve:
remaining