|
|
| ... products without technical information |
| |
Cryogenic valve valve series 440
DNN (Nominal Diameter): 15-250 (other diameters and pressures on requests)
PN (Pressure rating): 20-100
Valve usable until -196°C and a pressure of 40 bars
TECHNICAL MAIN FEATURES
Standard ANSI
Great dimension
Technology: Moulded
Principle: Valve
Markets:
- Cryogenics
- Oil/gas
Connection:
- Has flanges
- To weld
Type of connection:
- THUS
- BSP/NPT |
|
Piston faucet
DNN (Nominal Diameter): 15-400 (other diameters and pressures on requests)
PN (Pressure rating): 16-420
Faucet used to complete or control in the sectors of petrochemistry, chemistry, with risks of filling
TECHNICAL MAIN FEATURES
Execution: A105, AISI 316, AISI 304
Sealing PTFE or another seal with the request
Can be gone up with all types of actuators
Connection of the actuators according to ISO 5211
Flanges fixing or to weld
Technology: Moulded or Forged |
|
| ... products without technical information |
| |
Viking Pump presents its innovative LVP Series stainless steel Vane Pump. With 14 Bar (200 PSI) thin liquid capability, and capacities up to 36 M3/Hr (160 GPM), the new LVP pumps are designed for corrosive, thin liquids at higher pressures than other positive displacement pumps. Exceptional performance, advanced durability, application flexibility, ease of installation, and ease of maintenance helps users realize enhanced productivity, and a lower total cost of ownership.
The LVP Series is a true, industrial-duty product with exceptional performance for corrosive, low viscosity liquids. Designed to minimize life-cycle costs, its 62 Rockwell C surface-hardened stainless steel casing reduces casing and vane wear. Its standard chrome oxide coated shaft and silicon carbide bushings are extremely hard and long lasting. Its PEEK® vanes offer high strength, low friction for less wear, and broad chemical compatibility. Its maintenance-friendly design allows complete draining and easy vane or seal replacement without removing the pump from its system.
The LVP series is available in a metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, or with ANSI flange ports, NEMA motor mount, and inch-standard seals, and can be foot mounted. |
|
KT6C SELECTED highest pressure and utmost RPM vane pump
Intensive pressure:350bar
Continuous pressure:275 bar
Maximum RPM:3000RPM
Displacement:21.3/26.4/34.1/37.1/46/58.3/63.8/70.3/79.3/88.8/100
Application:
Ocean going and Marine equipment, construction equipmnet
Scrap balers equipment, Construciton equipment, oil explortion
machine, Oil exploration equipment, presses and shearing machines
* Installation dimensions compatable with Dension pump
|
|
DVQ-20 low noise, excellent performance high pressure pump
The maximum pressure can reach 270 bar
Displacements: 17, 23, 26, 32, 38,44
Apply to:hydraulic press brake, shear, bending and steel sheet forming machine.
* Installation dimensions compatable with Atols pump |
|
| Two-stage electric and petrol pumps for mobile industrial tools. Very lightweight (25 kg) high pressure (720 bar) pump. |
|
Hydraulic electric pump - can be combined with our GKS-jacks!
Coupled by means of sealed quick release connectors, joined with hose couplings. Safe operation guaranteed by synchronous lifting and lowering at two or four positions using the pump. Reliable functionality, as the one-man operation separate pumps serve to ensure that individual jacks are not overloaded.
Coupled by means of sealed quick release connectors, joined with hose couplings.
Equipment: 2/2 directional control valve for single acting cylinder, pressure gauge remote control cable 3m, 2x2m hose with two couplings.
Optional: two-fold or four-fold distributor cabinet with shut-off valves, hose extentions and other accessories available on request.
|
|
Hydraulic hand pumps
For loads, which cannot be lifted at the front face, or where the load capacity is to be doubled a simple formula can be used:
pump + 2 jacks = 1 jack-SET
In other words:
The separate hydraulic hand pump make up one jack SET with two or four machine jacks. |
|
” oil-free
” up to 150 bar
” absolutely gas-tight
” compressed air and gas
” ATEX-conformity
” air- or water-cooled |
|
| ... products without technical information |
| |
The innovative hydraulic pipe measuring points serv-Clip® for the MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better
different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE. |
|
The innovative hydraulic pipe measuring points serv-Clip® for the PROFESIONAL MAINTENANCE OF YOUR HYDRAULIC SYSTEMS.
No only better
different!
* QUICK INSTALLATION (ONLY 3 MINUTES) - NO NEED TO CUT OPEN PIPES
* Type 1 NO SHUTDOWN of installations for mounting on pressurized pipes
installation of pressure switch, gauge and sensors, particle counters
* Type 2 SHORT SHUTDOWN of installations for mounting on NON-pressurized pipes.
add. to type 1- installation of flow rate, leackage, pressure, temperature and aqua sensors.
* Up to 630 bar / 9100 psi screwed coupling M 16 X 2
* Particle measurement according to ISO or NAS classes
Technical Data :
* for diameters 10 - 42 mm / Tube (OD) 3/8" - 2"/ Pipe (ID) ¼" to 3"
* Working pressure up to 630 bar/ Steel wall thicknesses up to 5mm
* Working temperature from -40°C to +120 °C
* Viton O-Ring in leak proof clamp up to 200°C
COMBINE SERVCLIP WITH OUR FLOW RATE AND LEAKAGE SENSORS FLUID-CHECK AN ECONOMICAL AND INNOVATIVE CHOICE FOR YOUR MAINTENANCE. |
|
After several successful tests conducted in combination with MARKHIP Ultrajack thermoplstic hose, OLMARK Quality Control system guarantees the full suitability of 1/4" MU crimped fittings with applications of 800 bar working pressure, coupling the advantages of a quick and easy NO-SKIVE assembly with high reliability in high or very high pressure applications.
Characteristics:
- suitable for hard applications, resistant to high and very high working pressures
- tested with more than 500.000 cycles of pulsating pressure
- complying to and exceeding EN/ISO international directives
- total RELIABILITY, Olmark Quality guaranteed
OLMARK Technical Department is available to provide more in-depth information and technical details with regards to areas of application. |
|
| Larox Flowsys Oy is manufacturing reliable and functional pinch valves to process industries worldwide. Larox valves are well suited for shut-off and control applications involving abrasive or corrosive slurries, powders or any other types of materials that can lead to packing and hardening at the valve. Various sleeve, actuator and valve body materials are available to handle a wide range of fluids and materials. The standard range of Larox Valve solutions is for diameters 25 mm - 1000 mm, temperatures -50 C - +160 C, and pressures 0 - 100 bar. |
|
Application
- as cartridge
- as modular valve
Shut-off valves are used for manually
opening and closing a channel. They
can also be used as drainage valves
against the tank line.
Shut-off valves are suitable for bidirectional
flow. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Faucet with floating sphere 2 parts
DNN (Nominal Diameter): 4-200 (other diameters and pressures on requests)
PN (Pressure rating): 6-160
TECHNICAL MAIN FEATURES
- Execution: A105, ISO, ANSI 515 or AISI 316
- Can be gone up with all types of actuators
- Connection of the actuators Iso 5211
- Anti-static
- Direction of the fluid in the two directions
Technology: Forged
Principle: 2 parts
Markets:
Chemistry
Hydroelectric
Oil/gas
Connection: With flanges
Type of connection:
- THUS
- PN/ISO
Passage:
- Integral
- Reduced |
|
Faucet with shaft sphere
DNN (Nominal Diameter): 25-800 (other diameters and pressures on requests)
PN (Pressure rating): 6-420
TECHNICAL MAIN FEATURES
Execution: A105 or 316L
Double floating seats
Gaskets anti-blow of ram and replaceable
Triple seals
Anti-static
Fire-resistant according to API standard 6 FA/API 607/BS6755
Circulation of the fluid in the two directions
Technology: Moulded or Forged
Principle: Shaft sphere |
|
Valve doubles beating between flanges
DNN (Nominal Diameter): 50-1200
PN (Pressure rating): 10-420
Protector of circuit industrial Generals, hydrocarbons and of process
TECHNICAL MAIN FEATURES
Assembly between-flanges
Excel hydraulic output
Compactness
Sealing ensured by an excellent distribution of the force of spring on the leaves guaranteeing a good support on the seal of the seat
Weak pressure losses
Progressive opening controlled by spring at double dot of support
Leaves stainless or bronzes
Vulcanized Joints NBR gorges some on the seat
Horizontal and vertical operation ascending
Technology: Moulded
Principle: Double leaf |
|
Valve valve
- DNN (Nominal Diameter): 15-300 (other diameters and pressures on requests)
- PN (Pressure rating): 10-420
Technology: Moulded or Forged
Principle: Valve
Markets:
- Chemistry
- Hydroelectric
- Oil/gas
Connection:
- Has flanges
- To weld
- Tapped
Type of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO |
|
Process-Gas Screw Compressors are used in all applications where heavily contaminated components in gases and gas mixtures would curtail the life of other types of compressors. Their low speed of rotation permits direct injection of large quantities of liquid.
These oil-free compressors attain volume flows of up to 100,000 m³/h and an outlet pressure of 50 bar.
|
|
|
|
see the results for the following category