|
|
Description
This wheel motor is the latest addition to the Char Lynn product line. The Delta motor provides torques up to 11,500 in-lbs. Eaton has packed this motor with many "best in class" features: the optimized geroler profile ensures smooth operation; the disc valve technology has the best performance and the bearing capacity is the highest in the industry for very demanding applications.
Features:
- Excellent reliability with time proven Char-Lynn components
- Proven disc valve technology with the highest efficiencies in its class
- Leak resistant motor with the front bearing protecting the shaft seal
- Torque up to 10,500 lb-in intermittant duty / Flow up to 30 GPM intermittant
- 12 displacements available from 6.9 to 46 CID
- Shaft sizes up to 1-5/8 inch
- 3-1/4 inch front pilot and 5 inch rear pilot
- STC ports available
Benefits:
- Perfect replacement for Parker® TF-TG and WhiteTM RE motors
- Lowest no load pressure drop which leads to longer life and lower temperature operation
- Highest overall efficiency: more available HP to the system than competitive motors
- The highest side load capacity with 4,500 lbs standard at 3" from the mount face
Applications:
- Scissor Lift
- Boom Lift
- Industrial Sweeper
- Mower
|
|
The radial piston design ensures very high starting torque efficiencies, especially at high pressures where they are most required in mobile applications. Efficiency is typically > 94% at 400 bar.
The maximum torque requirement for wheel motor applications generally occurs with the vehicle al standstill or at low speeds, for example, during acceleration from stand-still or when overcoming an obstacle or slope.
High starting torque in the hydraulic motors therefore means better vehicle performance, less energy wastage and heat generation, especially with frequent stop-start work cycles.
|
|
| ... products without technical information |
| |
HEINZMANN offers compact drives integrated into the wheel hub and complete drive systems for use in light electric vehicles.
The RN Series comprises a brush-type disk motor integrated into the wheel hub and a transmission, with or without integrated freewheel. The motors feature axle ends on both sides, and are designed to be mounted on a fork bracket. They are characterized by their extremely low weight and are used for bicycles, scooters, three-wheelers, rickshaws and various goods transportation vehicles.
|
|
The RN-EC Series are direct drive, multipole, brushless DC motors with a single-sided wheel hub mounting. As well as the drive components, the motors include integrated drive and control electronics, and an integrated mechanical holding brake if required.
When arranged in pairs, the motors can communicate with each other and with a control device (e.g. joystick) using a CAN bus, providing a means for executing steering movements for the vehicle. Applications include: goods transport systems, flat bed carts, cargo trolleys, etc. The drive systems are also available with either handgrip or remote control options.
Single motors are also used as battery-powered, independent actuators for providing rotational and pivoting motion.
|
|
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
| ... products without technical information |
| |
|
Indicated for the grit-blasting to passage of outlines and sheets to you without length limits. Pieces come deal to you on 360° in a single passage.
|
|
Free-flowing machine with rollers is used for continued shotblasting of the corroded layer and filing from sheet metal, sections, simple constructions and small shafts. Treated objects move through the machine on a roller conveyor.
One type of shotblasting machine with roller conveyor is free-flowing machine for blasting cylindrical elements. This machine is used for continued shotblasting of the corroded layer and filings from tubes' surface, round sections, gas steel bottles and other cylindrical elements. Treated objects move throug the machine on a conical cylindrical conveyor or on conveyor with askew wheels.
These machines may be built into highly productive lines for basic colour application, including drying chamber, automatic colouring chamber and drying tunnel.
|
|
Conscious that all the machines are not used in 3x8, Wheelabrator Group designed a shot-blasting machine specifically adapted to the intermittent uses out of metal frame.
The conveyer shot-blasting machine with rollers RB 1500 SmartLine is equipped with 4 turbines high-output Roto-jet judiciously laid out, which allow a cover to perfect sections posed with the horizontal heart. Once granulated, the sections pass in a hopper of brushing-blowing controlled in height, which make it possible to evacuate all the shot of the sections. Those leave the machine clean and vacuum-cleaned.
When designing its machine, Wheelabrator Group stressed the robustness, reliability, and the maintainability of its machines.
|
|
|
Grit blasting machines for plates, sheet irons, beams and structures with roller conveyer for plates,sections and structures.
|
|
| ... products without technical information |
| |
|
Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability.
|
|
Mineral Processing
Building material plant
Russia
1x roller mill WM1012
rotor diameter 1000 mm
rotor width 1200 mm
input 5-20 mm, 5-40 mm
output <8 mm
limestone
clay 60 m³/h
|
|
Plain and tooth rolls for intermediate size reduction.
Labtech Essa rolls crushers are designed for rapid, controlled size reduction of ore, mineral or rock prior to metallurgical testing or further milling or grinding. They are typically applied in laboratory or pilot plant applications after primary production of the infeed material in a jaw crusher or similar. The nipping action of two off same diameter individually powered contra-rotating rolls produces an ideal crushing environment for a wide variety of materials. Product sizing is controlled by an (adjustable) gap setting between the two rolls. One roll is heavy duty spring mounted as protection against uncrushable material attempting to pass between the rolls. Roll crushers operate with a minimum of dust generation and produce a material with a tight size envelope containing a minimum of fines.
|
|
| ... products without technical information |
| |
... see all the products in the category
Grinders
|
| ... products without technical information |
| |
Roller and Apron Covers
Arnold roller covers offer effective pro-tection even where space is limited. A rewind mechanism ensures that the plastic or steel band is fully retracted. Together with its casing, available as an option, Arnold roller covers can also be retrofitted with minimum time and expense. Combined with a roller cover, or fitted sepa-rately, our Alustar and Aluform apron covers offer a high level of protection against heavy contamination.
|
|
HEMA has been able to position itself on the worldwide market as one of the leading manufactures of flexible protective coverings. Apart from bellows, our core product, this success has been due primarily to our extensive range of high-quality ROLLER cover systems. We can implement and test the technical production requirements of most customer-oriented solutions and develop alternatives quickly in our recently modernized production facilities.
In very small spaces, ROLLER cover systems are an ideal substitute for bellows coverings and do not require a full seal. They can be installed vertically, horizontally or in any combination of these. Leading international manufacturers are already using more than 30,000 HEMA ROLLER systems. The ROLLER Series offers customers a very large selection of different combinations, enabling them to lay out the covering as efficiently as possible. Customers can choose between:
|
|
Its matter, fabric coats indeformable, allows a great flexibility and an effective protection of the slides counter the stains, the chips and the cutting fluid while offering a good esthetics even in high rates of travel.
Deliverable with or without case of protection.
Several tens of matters available according to the conditions of use.
Deliverable with aprons Aluminum or execution reinforced for protections of pit or dangerous passage (possibility of aprons piétonnables)
|
|
Positive locking - ratcheting
SIKUMAT with single rollers
Re-engagment synchronously after 360° automatically
high consistency of torque limiting over operating period
torque 5 ...1800 Nm
speed 0...1000 1/min
medium robustness
SIKUMAT with double rollers
Re-engagment synchronously after 360° automatically
very high consistency of torque limiting over operating period
torque range 7 ...10000 Nm
speed range 0...1500 1/min
medium robustness
Positive locking - disengaging
SIKUMAT with single rollers
Re-engagment manually
high consistency of torque limiting over operating period
torque range 5 ...1800 Nm
speed range 0...5000 1/min
medium robustness
SIKUMAT with double rollers
Re-engagment synchronously after 360° automatically
very high consistency of torque limiting over operating period
torque range 8 ...10000 Nm
speed range 0...4250 1/min
medium robustness
Positive locking - non disengaging
RIMOSTAT- Torque limiter
output is driven with preset limit torque in case of overload,
medium consistency of torque limiting over operating period
torque range 2 ...6000 Nm
speed range 0...13000 1/min
medium robustness
|
|
Synchronous Autocoupleur with rollers
For a universal use
It réaccouple automatically in the initial position because of the resumption of synchronism all 360°
Positive coupler with rollers
Maintained transmission
There is no dissociation between kinematics and the driving force
|
|
|