|
|
* HORIZONTAL DESIGN
* 10 - 20 GALLON RESERVOIR
* 1/2- 5 HP ELECTRIC MOTOR
* .90- 5.00 GPM GEAR PUMP
* UP TO 3000 PSI
* 1 STATION DO3 MANIFOLD
|
|
|
|
|
|
Oilgear has been providing hydraulic power units (HPU) to the world since 1921. Our power units are supplied to OEM’s for new equipment as well as end users to upgrade or retrofit an existing system. They can be found in almost every application that requires hydraulic power.
A well designed reservoir will be sized and properly baffled to eliminate turbulence, aeration and temperature problems. Oilgear engineers will work with you to define system requirements to determine proper capacity and ensure the unit meets your space and performance specifications.
A complete HPU includes the reservoir, pumps, motors, oil cooling and filtration systems, and necessary valving or manifolds. Pumps can be mounted on the top or side of the reservoir. Vertical and in-tank mounting configurations are also available. Systems can be designed for special fluids or unique environmental conditions.
Large or small, custom or standard, single HPU or multiple system applications Oilgear can provide the hydraulic power unit you can count on to perform reliably for many years to come.
|
|
|
|
|
|
Type ABSKG Modular standard power units:
- Tank capacity 20; 40 and 60 liters
- Tank design: Aluminium tank
- Stable aluminium tank
- Modular design
- Compact power unit design
- Individual adaptation possible
- Versatile use
- Additional options possible
- Clear, maintenance-friendly arrangement
Type ABMAG Modular standard power units:
- Tank capacity 100; 160; 250; 400 and 800 liters
- Tank design: Steel tank to DIN 24339, form AN, cover form C, standard sheet AB 40-40
- Stable steel tank
- Modular design of controls, accumulator kits, cooler kits
- Pump/motor group
- Filter/cooler circulation circuit
- Basic power units with pump power unit, tank accessories (filler and breather filter, oil level indicator, cleaning cover, drain), return line filter, float switch, thermostat
Type ABHSG Power units with high-level tanks:
- Tank capacity 400, 630, 800 and 1000 liters
- Tank design: Steel tank with supports
- Filter: Filter/cooler circulation circuit
- Stable steel tank
- Thanks to modular principle, unit can be easily extended
- Good accessibility of all components
- Suitable for a multitude of industrial applications
- Long service life
- Low noise emission
- Flow matched to the control and adjustment elements used
|
|
|
|
|
|
L-shaped power units are ideal for demanding high-production industrial applications requiring high fluid volume and flow rate. The readily removable tank cover simplifies cleaning or replacing suction strainers. L-shape power units feature flooded suction inlets that eliminate the need for the pump to lift hydraulic fluid, thus reducing wear-and-tear.
JIC-Style
NFPA/JIC-style power units are especially well suited for heavier duty, continuous-use industrial applications requiring design flexibility and rugged construction.
Low Profile Series
Low profile power units are well suited for industrial applications requiring moderate fluid volume and flow rate. They are an excellent solution to applications in which space is at a premium, or where the power of a NFPA/JIC-Style unit is needed in a smaller, less expensive package.
Little Champ Series
Little Champ power units are designed for use in locations where space is limited and larger, noisier power units are not needed. They're ideal for applications requiring moderate fluid volume and flow rate, short hydraulic lines, and quick cycling.
Little Champ Kits
Little Champ power units can be built at your facility at your convenience. Continental will supply the complete set of components and hardware. Simply order the model code and you'll receive a complete kit to build your own power unit.
Custom Power Units
Exactly What You Need.
Chances are, you'll find a standard Continental Hydraulics power unit from our catalog that will meet the majority of your needs. But when it comes to extra large or special-purpose applications, you may need something that's never been built before; a customized solution tailored to your specific requirements. Examples
|
|
Power pack "Slab turnover device"
• Tank volume: 1000 litre
• Flow capacity: 2x max. 160 l/min.
• Working pressure: 2x max. 160 bar
• Power: 82,5 kW
Features:
The entire electrical operation of the power pack occurs using Jet-Control technology and can thus be controlled from anywhere in the world via the Internet!
Power pack for conveying bulk material (pusher plates)
• Tank volume: 800 litre
• Flow capacity: 2x max. 150 l/min.
• Working pressure: 2x max. 240 bar
• Power: 2x 30 kW
|
|
The small drive with the great advantages.
A light, convenient beginner drive with 14kW power.
-Ergonomic: clearly laid out, arranged operator elements.
-Super easy to manage: motor removable for transport.
-Also for 16 A current: change over button.
-Simple handling.
-Can be operated on 16A and 32A current.
|
|
KL**
• theoretical flow from 0,25 up to 7,8 cm3/rev.
• Working pressures up to 250 bar
• AC-, DC- and three-phase motors
|
|
These portable hydraulic power units have hydraulic flows from 1 to 10 GPM (4 to 38 LPM). These units will drive our smaller submersible pumps and also power most hydraulic tools on the market today. We offer portable units with gas (petrol) engines, diesel engines and electric motor drives. Shown here are many of our standard models. If you need a power unit with features or performance other than standard, please contact us with your requirements.
Engine fuel diesel and gasoline
Fuel tanks up to 56 liters (15 gallons)
Hydraulic flow up to 38 lpm (10 gpm)
Horsepower up to 15 horsepower
Hydraulic pressures up to 142 bar (2,100 psi)
Custom configurations including twin circuits and other pressure and flow combinations are available.
Available with electric start and optional wheel kit.
|
|
The mid-size units shown here have hydraulic flows from 25 to 55 GPM (95 to 208 LPM). These units will drive most of our contractor, municipal and industrial submersible pumps. We offer skid frame and trailer mounted units with diesel engines and electric motor drives. Shown here are many of our standard models. If you need a power unit with features or performance other than standard, please contact us with your requirements.
Available with John Deere and Deutz engines.
Electric powered units available.
Hydraulic flows up to 200 lpm (53 gpm).
Hydraulic pressure up to 170 bar (2,500 psi).
Available with fixed gear or variable piston hydraulic pumps.
Custom twin circuit and other flows and pressure configurations are available.
|
|
These 150 to 200 hp power units have hydraulic flows from 70 to 90 GPM (265 to 340 LPM). These units will drive our high performance submersible pumps and other hydraulically driven equipment. We offer skid frame and trailer mounted units with diesel engines or electric motor drives. Shown here are many of our standard models. If you need a custom power unit with features or performance other than standard, please contact us with your requirements.
Standard engines Deutz and John Deere.
Electric drive models available on request.
Hydraulic flows up to 340 lpm (90 gpm).
Hydraulic pressure up to 170 bar (2,500 psi).
Available with either fixed gear or variable piston hydraulic pumps.
|
|
* HORIZONTAL DESIGN
* 15-50 GALLON RESERVOIR
* 5 - 10 HP ELECTRIC MOTOR
* 3.75- 10.00 GPM VARIABLE FLOW PISTON PUMP
* UP TO 3000 PSI
* 1-6 STATION DO3 MANIFOLD
|
|
* VERTICAL DESIGN
* 2 - 10 GALLON RESERVOIR
* 1/2- 5 HP ELECTRIC MOTOR
* .90- 5.00 GPM GEAR PUMP
* UP TO 3000 PSI
* 1 STATION DO3 MANIFOLD
|
|
GT18 Power Units are small and compact featuring a single 5 or 8 gpm (20 or 30 lpm) tool circuit.
HPR Power Units are small and compact and feature either one 5 or 10 gpm (20 or 38 lpm) tool circuit or a twin 5 gpm (20 lpm) tool circuit combinable to a single 10 gpm (38 lpm) circuit.
The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling. The HV18 Converter contains some of the hardware and design features of our "state-of-the-art" power units without the engine.
|
|
ZA 13**
• Tank capacity 13 Litre
• Flow capacity from 2,2 up to 5,4 l/min.
• Working pressures from 140 up to 190 bar
ZA 30 **
• Tank capacity 30 Litre
• Flow capacity from 8 up to 15 l/min.
• Working pressures from 100 up to 170 bar
Also deliverable:
• Power packs with aluminium tanks 44 litres and 70 litres
• Power packs with steel tanks nominal size 12 up to nominal size 1250
• Power packs with special oil tanks
|
|
|
|
|
|
●SBH series of hydraulic power unit are mainly applied to the compatible drive for single body SB,SBD series safety brake and for other single function oil cylinders' compatible drive as well.
●YZA series hydraulic power unit are mainly applied to the compatible drive for the double or multi-body SB,SBD series safety brakes and also other single function oil cylinders' compatible drive.
●YZB series hydraulic power unit are used for the compatible drive of YLZ series of wheel brakes and YGZ series of rail brakes' and also other single function oil cylinders.
●YZB□ series hydraulic power unit are used for the compatible drive of YJA,YJD series rail clamp and SBD series safety brake and also others single function oil cylinders.
Main Design Features:
●Major hydraulic components are imported famous brands.
●Main valves with accumulator and pressure relay are leak-proof ball valves and have certain pressure compensation function.
●With Hand pump which can be used as emergency power supply at power off or maintenance.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
