|
|
The World's Only TRUE Industrial Duty Hydraulic Wrench Pump
*Heavy Duty One Piece Chassis
*Heavy Duty Multi-Tool Operation Manifold
*Heavy Duty Permanent Magnet Motor (EP Electric)
*Heavy Duty High Flow Complement Bearing Motor (AP Air)
Available in Electric and Air Driven Model - 115V and 230V
|
|
• 11/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25
amps at full load, starts at reduced voltage. CSA rated for intermittent duty.
• 10 foot remote motor control (except PE552S which has a 25 foot remote
motor and valve control).
• True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure.
• Reservoirs available in sizes up to 10 gallons. See accessories page 109.
• Light weight and portable. Best weight to performance ratio of all Power Team pumps.
• “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-theshelf components to build a
customized pump to fit specific requirements. By selecting standard
components you get a “customized” pump without “customized” prices.
All pumps come fully assembled, less oil and ready for work.
|
|
Enerpac introduces the latest innovation in hydraulic pumps.
These new pumps surpass the features and benefits
of conventional electric pump design.
• LCD providing essential user information;
• Self-test, diagnostics and read-out capabilities available;
• High efficiency and low operating costs;
• Easy to service.
|
|
The Ideal Hydraulic Power Pack is
ergonomically designed for portability!
The Ideal Power Pack is HYTORC!
The JET-Star is the “Workhorse” of electric,
hydraulic pumps. Its flat design makes it handy for easy portability from job-site to job-site. All valves and oil lines are protected with a shroud, designed to provide turbulence to cool the circulating air.
The JET-Star features;
• Oil level indicator
• 4-port manifold
• Micro-precision Valve
• Safety-button Remote Control
and comes complete with Safety hoses, oil and a 15’ remote control, ready to use!
|
|
Pump selection sheet
HP Range
Manually operated pumps
HEP1 Range
Electric driven mini pumps
HEP103 Range
Electric driven two stage
pumps - compact
HEP2 Range
Electric driven two stage
pumps - standard flow
HEP3 Range
Electric driven two stage
pumps - medium flow
HEP5 Range
Electric driven two stage
pumps - high flow
AHP11 Range
Air driven single stage
pumps
HAP Range
Air driven two stage
pumps
HPP Range
Petrol engine driven two
stage pumps
HSP Range
Electric driven split flow
pumps
|
|
HYDRAULIC PUMPS
Hand pumps, Air Hydraulic Foot pumps, Electric Pumps, Ultra High Pressure Hand/Air pumps, Ultra High Pressure Air Pumps, Working pressure from 700 bar to 2800 bar.
|
|
HYDRAULIC POWER UNITS FOR HYDRAULIC TORQUE WRENCHES
Hydraulic Power Units - Electrically as well as pneumatically driven, single to four ports for operating more than one tool simultaneouly, working pressure 700 bar, light weight and compact design.
|
|
GT18 Power Units are small and compact featuring a single 5 or 8 gpm (20 or 30 lpm) tool circuit.
HPR Power Units are small and compact and feature either one 5 or 10 gpm (20 or 38 lpm) tool circuit or a twin 5 gpm (20 lpm) tool circuit combinable to a single 10 gpm (38 lpm) circuit.
The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling. The HV18 Converter contains some of the hardware and design features of our "state-of-the-art" power units without the engine.
|
|
| ... products without technical information |
| |
PME - Electric motor pumps (series 2022/2042)
• Available with or without twin hose reel. 15 m or 25 m of twin hose are standard. Customized lengths are available.
• Sight glass for checking hydraulic oil level.
• Quick couplings with metal dust caps. The ends of hoses are clearly marked to ensure that tools are correctly connected.
• Colour marked direction valves to indicate which tool is in operation.
• Pressure gauge AMT801 on all pumps.
Hydraulic two-stage motor pumps giving a high flow rate and driven by electric motor. The two-stage design provides increased flow at low load for faster rescue efforts (cross over pressure 8.5 MPa). Up to two tools can be operated simultaneously.
PME2022 - model
Two tools can be connected at the same time and operated simultaneously.
PME2042 - model
Up to four tools can be connected at the same time, and two can be operated simultaneously.
|
|
Double Acting Cylinder
360° x 180° Swivel hose connection to reduce hose whip lashing & easy usage at restricted areas
Special high strenth, ultra-light Aluminium alloy material for strength & light weight
360° adjustable reaction arm with trigger style lock for easy adjustment
Compact unibody design with one way ratchet mechanism
Minimum moving parts for durability & low maintenance
External ratchet freeing mechanism
Working pressure of 700 bars
Accuracy ± 3%
|
|
Linear Cylinder Type Hexagon Torque Wrench
Torque Capacity up to 21,180 Nm, Hexagon Cassettes A/F sizes 32mm to 130mm, Maximum Working Pressure 700 Bar.
Double Acting Cylinder.
Linear Power Head - flat & sleek,suitable to exchangeable cassette with one way ratchet mechanism.
Optional square drive cassette attachements for use with Power Head of TLC-28 and TLC-54 models.
Extra Sleek - Ultra strong, exchangeable cassette suitable to limited space.
Special high strength, ultra-light Aluminium alloy material for strength & light weight.
Very compact design with best torque to weight ratio.
Quick exchange of cassettes without using any tools.
360° revolving hose connections.
Torque precision ± 3%
|
|
Ingersoll Rand pulse tools meet the new demands of assembly operations with high speed rundown of fasteners, exceptional accuracy and consistency in torque delivery, and operator-oriented design. A unique hydraulic impulse mechanism - driven by an air motor - applies torque to fasteners with a degree of control not possible in conventional tools. The result is precision fastening, with virtually no over-torquing in critical applications. Plus, tool users benefit from the added pluses of reduced transmission of torque reaction and vibration, as well as improved balance and quiet operation.
Ingersoll Rand offers standard, shut-off, and transducerized pulse tools to meet specific application requirements for accuracy and operator preference with broad torque coverage of 4 to 290 Nm.
|
|
The Stanley ID07 Impact Wrench develops up to 500 foot pounds (675 Nm) of impact torque making it an ideal tool for drilling holes from 1/2 to 1-1/16 inch diameter, 18 inches in length and working with fasteners of the same size diameters.
The Stanley IW12 Impact Wrench produces up to 1200 foot pounds (1632 Nm) of impact torque. The IW12 is used for nut, bolt and anchor bolt driving and is equally popular for wood boring and drilling.
The Stanley IW16 Impact Wrench produces up to 2500 foot pounds (3400 Nm) of impact torque. The IW16 is used for nut, bolt and anchor bolt driving and other medium to heavy duty applications.
The Stanley IW24 Impact Wrench produces up to 3500 foot pounds (4760 Nm) of impact torque. The IW24 is used for nut and bolt and anchor bolt driving and other heavy duty applications.
|
|
| ... products without technical information |
| |
Stanley offers the most extensive line of hydraulic breakers in the world. With over 40 models to choose from, Stanley has a breaker for light to heavy concrete demolition, asphalt cutting, post driving, ground rod driving, or hard packed earth digging.
Stanley breakers feature diaphragm accumulators for added punch and a feathering valve for easy start-up.
Many models feature Easi-RideTM feet or anti-vibration handles for added operator comfort.
|
|
* for die weights above 10 tons
* low rolling friction
* hydraulic lifting
* underside can be used to move rolling bolsters
|
|
ROLLBLOC lateral guides
To guide dies. For use on one or both sides.
Type SE with slanted entrance on both ends and from above
- ROLLBLOC lateral guides with guide rollers
- One or two-sided guide for pressing dies.
- 2 versions
|
|
The Lynx LCC30 Concrete Chain Saw is used for fast cutting of concrete, reinforced concrete, conduit, brick and other masonry. Plunge cutting and square corner cutting is not a problem.
The LCC31 Concrete Chain Saw is used for heavy duty cutting applications involving concrete, reinforced concrete, brick and other masonry products, and stone. Plunge cutting and square cutting are not a problem.
|
|
HYDRAULIC BOLT TENSIONING DEVICE
Output 155Kn to 4476Kn, Stroke up to 15mm, Suitable for Bolt Sizes M18 to M115 in various models
|
|
Axial Tool length adjustment up to 10 mm via a screw in the center.
Optional "QUICK-SET" Tool length adjustment up to 10 mm stroke allows for tool length adjustment with cutting tool and retention knob assembled.
|
|
Model GR60 Cup Stone Grinder
Features:
- 6 inch diameter wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model HG60 Bull Nose Grinder
Features:
- 2.5 inch cone wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model HG80 Grinder
Features:
- 8 inch wheel
- 5/8 inch - 11 arbor
- Feathering ON/OFF valve
- 6000 rpm maximum
Model FG10 Frog Grinder
Features:
- Grind Frogs, rail ends or mis-matched rail
- 6 inch wheel
- 5/8 inch - 11 arbor
- 3-position pivot allows for 3 separate grinding operations
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
Model PG10 Profile Grinder
Features:
- Grind rail from 90# to 140#
- 6 inch wheel
- 5/8 inch - 11 arbor
- Adjustable flange wheels
- Height adjustment
- Feathering ON/OFF valve
- 6000 rpm maximum
|
|
The Lynx LCS14 Cut-Off Saw is used for fast cutting of concrete, masonry, pipe, structural steel beams ang guardrail. Lynx LCS14 features are:
- 7-9 gpm (26-34 lpm) operating range.
- 14 inch abrasive or diamond segment (wet or dry) blades.
- Available in clockwise or counter clockwise rotation models.
- Internal flow control to prevent over-speeding.
- Internal blade brake.
- HTMA quick disconnect couplers included on all models.
- Adjustable blade guard.
- Optional Saw cart.
|
|
The Stanley MHP1 TracHorse is a carryall with hydraulic driven tracks, powered dump bed, and hydraulic tool circuits.
The Stanley MD10 Mini Dumper is a carryall with powered tracks.
|
|
Without a doubt, Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
Like our detwatering pumps, the pure power of hydraulic tools is also exemplified in our trash pumps. Our TP03 pump discharges an impressive 450 gallons per minute (1688 lpm) and can handle up to 3 inch (76 mm) diameter solids. Our TP08 discharges 800 gpm (3028 lpm) and can handle up to 4 inch (102 mm) solids.
|
|
|
|
