|
|
* 60 Tn power.
* 450 x 600mm lower bench.
* 350 x 500mm supper bench, with double guidance.
* 225mm collar depth.
* 300mm upper bench route.
* 400mm opening between benches.
* 2 speeds, approximation and operation.
* Course control via end of track.
* Operation via double two-hand push button.
* Machine weight: 3,000Kg.
|
|
Neff C-frame presses
Efficient and versatile
Our hydraulic c-frame presses are valued for their high efficiency and versatility. Our wide range of equipment is also systematically geared to the requirements of our customers.
All c-frame presses can be operated in both manual and automatic mode. Moreover, they can be readily configured as assembly, drawing, high-speed, straightening presses or broaching machines.
|
|
Flexibility in all sizes
Our column presses are generally configured as two, three or four-column presses. We offer individual solutions to suit the product and application.
|
|
|
|
|
|
DESCRIPTION
The press BV or MIL is used for splitting, adjusting, maintenance and try-out operations on dies and moulds (thermoplastics, die casting, thermosetting, rubber and blanking) and it is possible to inject special waxes, at low pressure, into the mould.
CONSTRUCTION
The very sturdy structure consists of a welded and normalized steel basement and cast iron base-plate.
The lower plate is idraulically extensible and therefore it makes easier the carrying-out of the mould loading and unloading. Furthermore it makes possible to draw the die or mould lower part out of the press by carrying-out the treatments in effortless work position.
The upper plate slides vertically by hydraulic actuation on the four guide columns and can be overturned by 360° way it is possible to put the upper part of the die or mould upper part in effortless work position. The upper plate clamping in the exact horizontal positioning will be given by four hydraulic actuated locating pegs.
CONTROL PANEL
Each button on the control panel is marked with a clear function. The sequence of movements is controlled by PLC-SIEMENS S7 to prevent any mistake of the operator.
MACHINE CONTROLS
Pre-programmed SIEMENS S7- electronic controls.
ADVANTAGE
- Digital control of the parallelism
- Digital monitoring of stroke
- Digital monitoring and setting of pressure
- Self-learning system for recording of mould stroke
- Multi-languages diagnostic error search
- Management of all press functions
|
|
|
REIS try-out and spotting presses guarantee perfect dies prior to production run. High quality, precision and economic efficiency of our spotting presses offer decisive advantages for any tool and die maker. REIS spotting presses reduce the production costs for a die and also result in reduction of fixed costs.
|
|
|
The press Mecamaq type PDV250C, has a power of 250tm, the low table is of 1.200 x 1.100mm and Superior of 1.000 x 1.000mm with guided of the table for 4 guides of Ø 70mm and with tips of bronze. The course of the top table, 300mm and the maximum opening between tables, 600mm. The hydraulic group is 2 speeds and the power engine of 15Hp. He has a hydraulic cushion of 65tm of power, with a cylinder of double effect, the plate of the cushion is of Ø 950mm with a course of 180mm, with regulation of top ceiling by means of via end of track.
|
|
Press for flattening oxycutting plates.
* 400 Tn power.
* Motor-driven floating cylinder headstock.
* 400mm cylinder course.
* 500mm usable vertical light.
* 2,800 x 1,500mm workbench.
* 2 speeds, approximation and operation.
* 10 Hp engine power.
* 2 elevating rollers on the workbench.
|
|
Motor-operated presses by means of electrical pedals and a hydraulic group with electrically-operated valves with single or double speeds, in terms of requirements. Cylinder headstock floats along the bridge of the press by bearings and brake lock, which is very useful for straightening large pieces as the strength of the pressing cylinder can be applied on different points without having to move the same or can be used to work with different tools, as the strength can be applied on each of them.
Solid structure in a monobloc format with a frontal width of 1500mm. and floating bedplate adjustable to different heights by means of an endless reducer and end transmission with pinions and chains. Machines are distributed with support dollies for the bedplate, full oil tank, glycerine pressure gauge and instruction manual.
|
|
|
We are long time specialists for chipless coldforming of sheet metal, tubes and profile sections and as a pioneer of clinching - the innovative technique connecting sheet metal components - we can support and assist our customers with a wide range of standard and customized tooling.
|
|
AGME produces a standard versatile range of Hidraulic Presses (PH-15, PH-30 and PH-60)that meets most assembly requirements: punching, bending, riveting, cutting, pressing and assembly. Our Hydraulic Presses are manufactured to customers' requirements.
They can be supplied with:
- Special spindle strokes
- Special throat dimensions
- Double column
- Rotary tables
- Process Controls
Pro-type AGME Hydraulic Presses are complete with automatic stroke positioning and pressure control. This enables the machines to be changed over quickly and replaces manual settings.
|
|
SCHLEIFSTEIN ship building presses are used to produce threedimensional, cold-formed segments made of steel plates for the ship building and metal working industry. The presses work with and without crane manipulators, are equipped with motor-adjustable rotary tables and can be converted into roll presses by only few movements.
The hydraulic press is path-controlled as well as pressure-controlled. The crane manipulator and the press have a synchronized control and operation. The upper and lower dies are freely-turnable.
• Ship Building Presses
• Crane Manipulators
• Roll Press Units
|
|
Our double-sided presses, also known as frame presses, are extremely flexible and versatile, allowing them to be used in virtually all areas of sheet metal processing. Our comprehensive range of equipment enables us to tailor each press to your particular task.
Our products range from the single-action press to the sophisticated double or triple-action press right through to the full-blown transfer press.
|
|
Standard Features
• Minster's Production Management Control
• Massive Cast Frame Construction
• Hydraulic Clutch and Brake
• Two Flywheel Brake Assemblies
• Eccentric Shaft
• One Die Blowoff Valve
• Pneumatic Slide Counterbalance
• Full Wrist Pins
• Heavy Slide and Connections
• Hydraulic Locking of Slide Adjustment and Nut Clearances
• Quick Access Feature
• Steel Bolster
• Eight-Point Gibbing
• Monitoring of Drive Lube Points
• Variable Frequency Recirculating Lube and Hydraulic Systems
• Press on Isolation Mounts
|
|
|
All trimming presses are suitable for manual and automatic operation and offer free access to all sides. Additional processing steps such as drilling, sawing, threading, and milling are possible in the trim die with press control. The presses are also available with a sliding/tilting table which guarantees an optimum scrap removal and tool cleaning in automated casting cells.
|
|
• Quality welded frame for maximum strength and stability
• Optimum daylight and bed width
• With hand pump, air or electric driven power source
• Single or double-acting GOLDEN RING DESIGN cylinders
• Standard glycerine filled gauge with dual scale reading in
kN and bar
• Moveable pump table on presses with electric pump
allows for easy side loading for large workpieces
• Height adjustment of lower bed on 25 ton press with a
winch
• Unique “Hydrajust” bed positioning device on 50, 100 and
200 ton press with doube-acting cylinder allows
adjustment of the lower bed
|
|
Workshop presses
LUKAS workshop presses are operated by hand- or motor pumps. Presses with hand pumps are equipped with single-acting cylinders, presses with motor pumps are equipped with double-acting cylinders.
- Pullers/ spreading wedge/ nut
- Spliters/ workshop presses
|
|
Manual presses with a single speed pump. Simple-acting cylinder with spring recall and tensile approximation screw Solid structure in a monobloc format to ensure a greater rigidity of the machine as a whole, except for model MD that is manufactured with a “U” tie beam.
Floating bedplate adjustable to different heights by means of a hoist or endless reducer, depending on the model, and end transmission by stranded steel cable.
|
|
AddisonMckee is pleased to offer a brand new line of c-frame hydraulic presses in 25-, 50-, 75- and 100-ton models. Utilizing proven and standard design criteria, AddisonMckee presses can be tailored to each customer’s most specific applications and feature heavy duty steel weldments and a superior guidance system that provides advanced precision and reliability.
Aware that one of the key considerations when choosing a hydraulic press is the amount of force necessary to perform the function required, as well as the operation speed desired, AddisonMckee models provide the best in value, speed, durability and reliability.
|
|
C-Type (Open Front)
Especially small-parts manufacturing
Easiness for handling
- RHCP 100
- 1.000 kN pressing capacity
- Double action (with die-cushion)
- CNC-control-system
- Cutting-Shock-Absorbing-System
|
|
4 Column
Un-restrictive access to the working area
Easiness for handling
Especially convenient for different big sizes of dies
Excellent guiding
- RHKP 400
- 4.000 kN pressing capacity
- single action
- CNC-Control-System
- Data-Exchange-System
- press-line-interface-configuration
|
|
Presses & Mould-clamps
Now LED is extending its service with an offer to study and manufacture presses and mould-clamps for polyurethane foam injection.
Our strengths : Price, quality, customized design, technical support and meeting deadlines.
|
|
Standard Features
• Direct drive servo indexer reduces maintenance and improves accuracy.
• Hydraulic clutch and brake providing fast starting/stopping.
• Hydrostatic and hydrodynamic piston slide guiding system.
• Quick lift feature for quick and easy die access.
• Pressure monitored recirculating oil lubrication system.
• Cast frame construction improves vibration absorbtion.
• User-friendly multi-lingual control.
|
|
Capacities from 10 to 100 tonnes
Stroke length 250 or 330mm
Working pressure 700 Bar
- Choice of manual, air or electric powered pumps
- Adjustable work table
- Supplied complete with pressure gauge
- Other configurations available on request
|
|
|
|
|
|
NC and Conventionalm Hydraulic combine "C" frame presses
BuPower
BuPower has too many functions that combined from a lot of sheet metal working machines. BuPower is fast and user friendly when doing the work. Of course in high accuracy and efficiency.
Bending, punching, notching, cutting, forming and also more operations are available in Bupower.
BUTEK Company is a manufacturer of special purpose machines for Automotive Industries. BUTEK is experienced of sheet metal forming process and now we represent BuPower Combined Hydraulic Press Brake.
BuPower bring many choices to pres brake operators with NC and Standard types.
In all types you will find Standard device; stroke shaft and backguage; hydraulic pressure switch that can be easily set up by operator to reach the positioning and bending precision.
With robust "C" typemain frame and large work table is appropriate for different types of tooling.
Base of BuPower design is including safety, useful and serviceable use with standart and optional devices.
BuPower is a special design for our customers that are manufacturer of electric cabinetry, panel, medical equipment, industrial kitchen equipment, white goods, automotive industries and other OEM's
Optional Touch panel enables an easy achieve and control of all steps. Control panel can be inselection of different languages. It's possible to go help page at any time on the screen.
High Quality Ball screw and precise guide shafts are used at standard backguage in all types. This increases the safety and precision of BuPower
In order to get high quality products, standard and optional tools are specialy made. So, tools cabn easily be set up.
|
|
Our hydraulic presses are recommended:
- With the service maintenance of industry for large work of rectification, folding, cambering, extraction etc...
- With the repairers of heavy vehicles and machines of public works
- With the agricultural mechanics
- With the electricians
They are delivered with:
- A frame tack welded with dismountable feet
- An adjustable work table in height (several positions according to the models)
- Of a hydraulic actuating cylinder with built-in tank
- Of a hydraulic actuating cylinder for raising of table according to model
- Of a deadened pressure gauge with glycerin bath
- Lever of pumping (or hydraulic pump for versions PHP)
- 1 set of vés monoblocs
and other functions according to the models.
It esxist various options: set of chucks, plates side extraction, jack standard VL 12.
Model 40,60 and 100 tons
Model 20 tons
Model 8,12 tons
|
|
STANDARD FEATURES Steel welded frame
- Hydraulic system Bosch / Rexroth
- Electrical parts Siemens / Telemechanique
- Two hand control Start Button
- Emergency Stop Button
- Induction hardened and chrome plated column rods
- Two speed piston for moving plate at fast approach speed
- Automatic / Manual
OPTIONAL FEATURES
- Light curtain for safety
- Conformity to the EC Directives (CE)
- NC control
|
|
|
|
|
|
Composite hydraulic presses
Power built to measure
Those who use large-sized hydraulic presses often have specific problems to solve that are sometimes linked to both existing dies and the particularity of the parts to be produced. Working alongside clients in the development of designs that meet both their present and future needs by intervening with the appropriate personalization is just a part of the universally recognized expertise vaunted by our technical staff.
Technology and flexibility in evolution
In a world characterized by continuous and frenetic development, new needs that demand new solutions arise every morning.
Choosing those solutions
Our ability to listen to our clients, propose alternatives based on experience or innovation, and skill in identifying the best course of action to take together make us the solid partner clients need.
Unquestionable reliability
Hardly the result of a day, experience and quality are accomplishments achieved only through years of hard work and steady improvement. Omera is justifiably proud of the results obtained, the many applications of its products around the world, and its reputation in the market.
|
|
|
|
