|
|
SCHLEIFSTEIN ship building presses are used to produce threedimensional, cold-formed segments made of steel plates for the ship building and metal working industry. The presses work with and without crane manipulators, are equipped with motor-adjustable rotary tables and can be converted into roll presses by only few movements.
The hydraulic press is path-controlled as well as pressure-controlled. The crane manipulator and the press have a synchronized control and operation. The upper and lower dies are freely-turnable.
• Ship Building Presses
• Crane Manipulators
• Roll Press Units
|
|
• Quality welded frame for maximum strength and stability
• Optimum daylight and bed width
• With hand pump, air or electric driven power source
• Single or double-acting GOLDEN RING DESIGN cylinders
• Standard glycerine filled gauge with dual scale reading in
kN and bar
• Moveable pump table on presses with electric pump
allows for easy side loading for large workpieces
• Height adjustment of lower bed on 25 ton press with a
winch
• Unique “Hydrajust” bed positioning device on 50, 100 and
200 ton press with doube-acting cylinder allows
adjustment of the lower bed
|
|
Workshop presses
LUKAS workshop presses are operated by hand- or motor pumps. Presses with hand pumps are equipped with single-acting cylinders, presses with motor pumps are equipped with double-acting cylinders.
- Pullers/ spreading wedge/ nut
- Spliters/ workshop presses
|
|
Manual presses with a single speed pump. Simple-acting cylinder with spring recall and tensile approximation screw Solid structure in a monobloc format to ensure a greater rigidity of the machine as a whole, except for model MD that is manufactured with a “U” tie beam.
Floating bedplate adjustable to different heights by means of a hoist or endless reducer, depending on the model, and end transmission by stranded steel cable.
|
|
Capacities from 10 to 100 tonnes
Stroke length 250 or 330mm
Working pressure 700 Bar
- Choice of manual, air or electric powered pumps
- Adjustable work table
- Supplied complete with pressure gauge
- Other configurations available on request
|
|
Our hydraulic presses are recommended:
- With the service maintenance of industry for large work of rectification, folding, cambering, extraction etc...
- With the repairers of heavy vehicles and machines of public works
- With the agricultural mechanics
- With the electricians
They are delivered with:
- A frame tack welded with dismountable feet
- An adjustable work table in height (several positions according to the models)
- Of a hydraulic actuating cylinder with built-in tank
- Of a hydraulic actuating cylinder for raising of table according to model
- Of a deadened pressure gauge with glycerin bath
- Lever of pumping (or hydraulic pump for versions PHP)
- 1 set of vés monoblocs
and other functions according to the models.
It esxist various options: set of chucks, plates side extraction, jack standard VL 12.
Model 40,60 and 100 tons
Model 20 tons
Model 8,12 tons
|
|
Ursviken Frame Bender Type SBRP
Facts:
- The frame bender is a 4-way bending and straightening press.
- Bending bulbs, flats, tees and angles.
- Compact one piece design including hydraulic operation.
- Machining of, for instance, S-profiles including straightening without turning of the profile.
- Bending of flat bars with special tools.
- Step feeding of profiles, with free selection of the step length.
- Variable distance between anvils, always centric to the main cylinders.
- Simple and well adapted design of the control functions.
- All bending forces are internally absorbed, therefore no foundation is necessary - only simple attachment by bolts
- Automatic operation by teach-in programming
- Storing of programs, from single bending points up to complete bending programs, for repeating of similar bending programs by internal PLC.
- Modern system for e.g. trouble shooting.
|
|
| ... products without technical information |
| |
|
|
|
|
FlexiStore
Divide off or enclose. Build new, modify or expand. The needs can differ in your industry or in your warehouse. However, if you choose Axelent FlexiStore you can rest assured since this warehouse partitioning system offers almost unlimited potential in the way the various elements can be combined and used. At the same time, you gain a versatile, safe and economical system, characteristics that apply to all Axelent products.
The FlexiStore panels are available in three heights and numerous widths. Using feet, uprights and extensions, you can then adapt your warehouse partitioning system to suit your particular needs. If you require a special solution, then we can also offer a cutting service to tailor your industrial or storeroom mesh walls to fit precise horizontal or vertical dimensions. You can also combine FlexiStore with any of our door packages. If you want a special colour adapted to other fittings, we can of course arrange this. However, in this case, the same delivery time as for our standard colours is not applicable. Naturally, we supply everything on specially-adapted pallets direct from our own warehouse in Hillerstorp, Sweden.
|
|
|
Mesh and steel industrial partitioning and office partitioning to create working areas throughout your business.
|
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has a Save-T partition to fix any need; protection of employees and goods from adverse environmental conditions such as noise, heat, cold, humidity, dust, and drafts. TMI has the largest stock of different sizes and thicknesses of flexible PVC in the United States to chose from to construct your partition; safety orange, blackout, weld screen, low-temperature, ribbed, insulated, anti-static, and standard clear, to name a few. A variety of configurations are possible between curtains and stand alone partitions. Curtains can be wall mounted, ceiling mounted, chain mounted, threaded rod mounted, pipe staff mounted. Modular enclosure partitions can be 2, 3, or 4 sided. The hardware comes standard in galvanized but stainless steel is also available. Each project is custom made to your specifications. Our design experts can help you with your problem area. We also manufacture custom strip doors.
|
|
FlexiStore Plastic & Sheet metal
Axelent’s plastic and sheet metal system also belongs to the FlexiStore group of products. The versatility of our systems means that you can combine plastic, sheet metal and mesh according to your particular requirements. To avoid gaps between the different panels, we recommend that you use our specially adapted sheet metal strip.
This is a system that is easy to assemble and which gives you the possibility to use the same posts and door packages as for our other mesh wall products. The plastic and sheet metal panels are available in two heights: 1100 and 2200 mm, as well as in four standard widths. Axelent’s FlexiStore plastic and sheet metal systems ideally suit warehouses that require versatile view protection or, for example, around an aerosol warehouse. Everything is delivered carefully wrapped on specially-adapted pallets direct from our own warehouse in Hillerstorp, Sweden.
|
|
|
The PD19 ® brand of wire deck is the only wire deck manufactured in the USA by a leading pallet rack manufacturer, Husky ® Corp. This means you get a wire deck engineered to fit right and meet the performance demands of professional material handlers. Made from six gauge steel using stringent quality control procedures, PD19 ® is the solution for both new and existing pallet rack systems. Numerous designs are available for a variety of capacity and application needs that cover all aspects of both manufacturing and distribution. Installs quickly with no tools and is an excellent choice for facilities with sprinkler systems. Meets all fire and safety regulations. When buying Husky ® rack, save time and money by leveraging the installation advantages of all of your rack system arriving on the same truck under one freight bill. Buy PD19 ®, the quality name in wire deck.
|
|
Monobloc full mesh panel
Modules of 500, 1000, 1500
Stabilising base dowelled to the floor
Delivered as kit or installed by us
|
|
Monobloc panel: solid, mesh or glazed factory panel
Modules of 1000 and 1200 allowing positioning of preferred door
Assembled by wedged keying system
Stabilising base dowelled to the floor
Easy installation
Delivered as kit or installed by us
Available colours: Panel and door: RAL 9016
Upright and stiffener: as per SIC colour chart
|
|
| ... products without technical information |
| |
|
Industrial Engines power a variety of off-highway equipment in the Agricultural Specialty, Construction & Forestry and Material Handling markets.
|
|
These are the characteristics of the TCD 2012:
Modern water cooled 4- and 6-cylinder in-line engines
Turbocharging with charge air cooler
Robust engine with high power density
Power take-off options integrated into the gear drive
Electronic engine control with intelligent adaptation to drive management
High-pressure fuel injection with DEUTZ common rail system (DCR®)
4-cylinder optional with mechanical injection system up to 88 kW
|
|
|
|
|
|
When our construction customers said that they wanted smaller, quieter, more powerful engines for micro and mini designs we brought them 400 Series. The range has been specifically tailored to micro / mini-excavators, skid steer applications, and the smaller sized dump trucks. For the top end of these smaller machines the 800 Series brings the same refinement, but adds more power.
The 1100 Series family of engines provides an engine platform that caters for different emissions legislation in world markets. The 1100A is suitable in non-regulated markets, the 1100D for Tier 3 / Stage IIIA legislation, and the 1100C range satisfying Tier 2 / Stage II. This approach makes life much simpler for manufacturers who wish to sell globally without spiralling re-engineering costs.
1100 Series contains models that can be tailored to Telehandlers, Large dumper trucks, Backhoe loaders and Wheeled or tracked excavators. Similar envelope size, mounting points, fuel, coolant, electrical and gaseous connection positions means a more efficient, lower cost design and installation process for equipment manufacturers. All the important end user benefits of improved NVH, cost of ownership, and productivity are maintained.
|
|
From January 1, 2006, the new air cooled diesel engine not only meets Japan's emissions regulations but also passes EPA's strict Tier 2 standards. Designed with the environment in mind, this engine is in tune with the needs of the times.
Superior vibration and noise reduction is achieved through the use of precision balancers. This leads to operating comfort even under long
work hours.
Keeping with the tradition of compact design, the new LV series are simple to install. It fits in cramped spaces without sacrificing power and performance. Yanmar's proprietary direct injection technology allows the engine to sip rather than gorge on fuel. This means lower running cost in the world of rising fuel prices.
Starting is a breeze with the standard recoil starter. Starter motor and switch are also available as an option.
|
|
Water cooled vertical engine TNV series 1
output: 10.0 - 19.5 kW (13.4 - 26.1 hp)
displacement: 0.570 - 1.116 L
EPA non road diesel engine emission control clear
EC non road engine emission control clearance
|
|
Water cooled vertical engine TNV series 3
output: 51.1 - 62.5 kW (68.5 - 83.8 hp)
displacement: 3.319 L
EPA non road diesel engine emission control clear
EC non road engine emission control clearance
|
|
Water cooled vertical engine TNV series 2
output: 21.9 - 41.2 kW (29.4 - 55.3 hp)
displacement: 1.330 - 2.190 L
EPA non road diesel engine emission control clear
EC non road engine emission control clearance
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
