|
|
The latest design in the proven K3V series, the medium pressure, K3VL pump has been developed for the mobile and industrial market where noise, efficiency, controllability, extended pump life and reliability are all considered essential.
Pioneering noise reduction technology along with features such as high efficiency, compact design, high power density, large self priming capability, long life, and a wide range of control options give rise to exceptional overall specification and performance.
Available in SAE and ISO mounting options, this low noise, medium pressure, variable displacement, open circuit pump provides the opportunity to share in the future of hydraulic pump technology.
|
|
|
|
|
|
Features/performances
The pump is available in faces 71,100 and 140 DC.
Sizes 28,45 and 180 DC will be marketing soon.
Pressure rating = 280 bar
Intermittent Pmax = 350 bar
Hydromechanical regulations: pressure, flow, power. See A10VSO 32 according to note RF92714
Electronic regulations:
SYDFE1-3X: analogical order via off-set amplifier,
SYDFEE-3X: analogical order via integrated amplifier,
SYDFEC-3X: order by CANopen via integrated amplifier
Description and Applications
A10VSO is an axial-piston pump of variable cubic capacity for industrial applications on average pressure. It showed its reliability in the plastic machine, the machine tool, the paper mill, or the agroalimentary one
Series 32 brings the following innovations:
Improvement of the ambient noise (- 3dB) and reduction of the pulsations by room of precompression
Improvement of the total output (+3%)
Improvement of the reliability of the rotary group and the hydraulic regulators
Improvement of its flexibility for the combinations of pumps: catch of universal force, standard ISO and SAE
Series 32 preserves the possibilities of operation with the not easily flammable fluids.
For the applications to high dynamic response and with a view to energy saving, series 32 also proposes a hydraulic electro order in loop closed under name SYDFE (X) - 3X.
|
|
|
|
|
|
Description and Applications:
A4VS is a pump with variable cubic capacity for industrial applications in high pressure and power. Its design in tilted plate allows him the most dynamic regulations and of the possibilities of combinations out of multiple pumps.
A4VS is declined in two families: open circuits and closed circuits
- a4VSO proved its reliability in traditional open circuits of type "presses", but also in the secondary regulations of type "testing ground".
- a4VSG is employed in the closed circuits, for applications such as the tunnellers. It envisages the options of cramming, sweeping and limitation of pressure. A compact version exists under name A4CSG
The diversity of the applications for which a4VS was requested led to many options of ordering of cubic capacity: hydromechanical or electronic regulations of pressure, flow, power; order of cubic capacity by hydraulics, electric, manual, valve proportional.
Features/performances:
Cubic capacities: 40cc with 1000cc
Pressure rating = 350 bar
Intermittent Pmax = 420 bar
Number of revolutions: until 3700tr/min for A4VSG in 40cc
Operation with not easily flammable fluids type HFA, C, D
1- A4VSO: to see RF92050
2- New A4VSO for fluids water-glycol: to see RF92053
3- A4VSG: to see RF92100
4- A4CSG: to see RF92105
|
|
PP - Air/hydraulic pumps (series 1000)
PP-1000 air/hydraulic pumps are very compact one-stage pumps that work in any position, horizontally or vertically thanks to a rubber bladder built in to the tank. The pumps can be operated by hand or foot.
• High oil flow.
• Easy to fill and check oil level.
• Safety valve prevents overfilling the tank.
• Return oil line can be connected to oil filler hole.
PP70-1000 - for those pumps we recommend gauge AMT801 and gauge adapter AVM204. Other combinations of gauge and gauge adapter are however possible.
PP70-1000/LS201, PP70-1000/LS250 - PP70-1000 pumps are available in a pre-mounted version with 2 m or 2,5 m hydraulic hose, quick coupling (AQI7) and swivel coupling (ASE10).
|
|
Variable-displacement axial piston pumps for closed circuits
Variable displacement axial piston pumps for open circuits
Fixed displacement axial piston motors
Variable displacement axial piston motors
|
|
|
Complete range of variable displacement axial piston pumps, with swashplate system, for closed loop transmissions. All pumps meet the need for continuously changing speeds, optimise the use of power and torque based on operating requirements, with hydraulic, mechanical, electric and electronic servo controls.
|
|
|
Axial piston pumps with fixed displacement have been development to work in light trucks with shorts periods of time. Its design is very similar to F1 series.
|
|
|
|
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
Characteristics:
- Open and/or closed circuit
- Displacement 5 to 1000 cm3
- Nominal pressure up to 450 bar
- Maximum speed up to 11,000 rpm
- Maximum power output 933 kW
Our versatile transmissions for mobile applications can be combined in a variety of ways with pumps, motors and open or closed loop control devices to offer the optimum design for every drive application and every power range.
Key advantages:
- Infinitely variable speed setting at fixed or variable input speed
- Immediate, jolt-free change in direction of rotation
- Simple, ergonomic operation
- High turnaround
- Automatic torque conversion
Axial piston pumps and motors are used for the travel drive and working hydraulics in a wide variety of mobile machines.
|
|
|
DESCRIPTION Oil hydraulic bent pump, 108cc/rot, aplication pressure-up to 350bar, peak pressure-400bar
|
|
Single or Multiple configurations
Flows to 29 gpm @ 2400 rpm with pressures to 3000 psi
Motors up to & over 40hp
|
|
|
External gear units are classic hydraulic units and come in the form of pumps and motors. Individual pumps, multiple pumps and lownoise SILENCE versions in seven different series open up a virtually unlimited range of possible uses.
|
|
Type T Pump
With the series type T we offer a program with several variants and constructions for the transport of almost all pumpable media.
It can be used up to maximum rotational speeds of 1500 rpm at pressures up to 16 bar. The rotational speed is basically determined by the viscosity or lubricity of the pumped medium.
At viscosities in excess of 10000 mm²/s the medium to be pumped should flow to the pump. In case of suction heights of more than 7 m LC and admission pressures in excess of 2 bar please contact our engineering department as larger piping cross sections will be required!
The pumps are driven by electric motors, backgeared motors, belt drives adjustable gear motors, or similar.
All pumps can operate with clockwise or counter-clockwise sense of rotation.
- pulsation-free pumping delivery
- independent of sense of rotation
- sturdy construction
- easy mounting
- wide selection of materials
- several sealing variants
- for packings with suction bore
|
|
|
PFG are fixed displacement external gear pumps, axial hydraulic balancing, simple and sturdy construction, lo noise level. Suitable for hydraulic oils or synthetic fluids having similar lubricating characteristics
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
|
|
|
|
HS
Grundfos HS end-suction pumps combine compact design, economical cost and simple maintenance to provide high-efficiency performance in a wide variety of applications. And because they include the pump end, motor adaptor and standard NEMA motor, Grundfos end-suction pumps install easily with no baseplates, bearing frames, couplings or guards.
FEATURES
* Ideal for water supply, irrigation, commercial and industrial uses
* Cast iron and brass contruction
* Capacity ranges to 175 GPM and 160 feet of head at up to 7.5 horsepower
* 60 Hz models available in all voltages, with 2 and 4 pole and specified enclosure classes available
* Optional MLE variable-frequency drive motor offers maximum efficiency and energy savings
* Buna-N O-rings as standard with carbon/ceramic shaft seal
APPLICATIONS
The Grundfos HS range of compact horizontal, centrifugal pumps are designed for small domestic and industrial water supply systems.
Applications include
* Liquid transfer
* Transfer and circulation of liquids within light industry and farming.
* Pressure boosting
* Domestic water supply
* Water Fountains
* Cooling systems
* Air-conditioning systems
* Light irrigation
* In addition, the HS is suitable for incorporation in specialized OEM equipment
|
|
Serie L - Aluminium body
Pumps
Motors
Flow dividers
Gear Pumps and Motors >> Serie G - Cast iron body
Pumps
Motors
|
|
Construction
- Close-coupled gear pumps (rotary pumps).
- Pump casing with suction and delivery connections with the same diameter and on the same axis (in-line execution).
Applications
-For fuel oil and liquids with lubricating properties.
|
|
Hydraulic Gear Pumps
- For truck applications
- From 16 c.c./rev To 80 c.c./rev
- Pressure up to 325 bar
|
|
|
Gear pumps with heavy duty body, side and rear ports. Double support by taper roller bearings on the shaft.
|
|
High capacity gear pumps
1 SPA ** / 2 SPA ** / 3 SPA **
• Displacement from 0,9 up to 61,1 cm3/rev.
• Working pressures up to 270 bar
4 ISP **
• Displacement from 60,3 up to 120 cm3/rev.
• Working pressures up to 190 bar
|
|
* Chemical gear pumps GX series
Internal gear pumps incorporating fine ceramic gears
Max. discharge capacity: 35.2/42.5 L/min
Max. discharge pressure: 1.0 MPa
Main materials: SUS316, SiC, PTFE
* Chemical gear pumps GM series
Magnetic drive sealless type internal gear pumps
Max. discharge capacity: 35.2/42.5 L/min
Max. discharge pressure: 0.7 MPa
Main materials: SUS316, SiC, PTFE
* Chemical gear pumps GM-J series
Exclusively designed for sodium hypochlorite
Max. discharge capacity: 20 L/min
Max. discharge pressure: 0.5 MPa
Main materials: PVC, SiC, CFRETFE, PPS
* Magnetic drive gear pumps MDG series
Compact gear pumps that completely eliminate leakage problems
Max. discharge capacity: 14/17 L/min
Max. discharge pressure: 0.6 MPa
Main materials: SUS316, CFRPEEK, PPS
|
|
Leakage free, sealless structure
The pump mechanism is the magnetic drive type. Free of leakage trouble, the pump is suitable to be incorpotated in various equipment.
Superior corrosion resistance
The wetted parts are manufactured from superior corrosion-resistant materials such as stainless steel, PPS, and PEEK. Therefore, the pump can be used to transfer various types of chemical solutions.
Long life design
Each part that is precision processed using Iwaki's original technology excels in thermal resistance, therefore does not cause pump troubles due to thermal expansion of the parts. Even when operated for long continuous hours, the pump should exhibit superior durability.
|
|
- For agricultural and truck applications
- Axial. From 20 c.c./rev to 110 c.c./rev
- Radial. From 11 c.c./rev to 96 c.c./rev
- Pressure up to 350 bar
|
|
|
|
|
|
PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting, with many improvements in safety and piloting.
Use
PH pump range is very large and allows covering the complete grouting range, from fine ground treatments to drilling injection. All pumps can grout loaded mud or great c/w slurry. PH 15 or PH 125 or PH 160 body can be directly mounted on drilling rigs. PH 2x5 and PH 15 can be mounted in one container, with integration of mixer and grout machines, eventually piloted by one computer for complete integration.
Versatility
The PH pump range is very easy to start and to maintain. All pumps are equipped with an automatic greasing unit. All pumps can be handled with a fork lift truck or with a crane. All pumps are equipped with a potentiometer in order to regulate the grouting flows.
Performance
The PH pump range has a large panel of grouting pressures (from 0 to 250 bar) and of flows (from 0 to 470 l/mn).
Safety
All PH pumps have been designed with automatic stop safety at the piston site, in case of opening.
|
|
INDUSTRIAL PUMP
Leduc axial pumps are of the stationary cylinder block type. The inclined
swashplate is turned by the drive shaft, thus causing the alternate movement of the pistons. Fluid enters the pistons via a groove in the swashplate and is expelled via check valves, self–priming if required. The forces on the shaft are taken up by bearings. The pump body is made of forged steel.
A precise calculation of the stability of the films of fluid between the friction surfaces means that there is virtually no wear on the moving parts.
|
|
|
|
|
|
The PFVI series is a fixed displacement vane pumps for applications for industrial hydraulic equipment. The PFVI is a 12 vane design rotating group that has been engineered for quieter operation for the in-plant industrial environment.
The Parker fixed displacement vane pumps are of rugged cast-iron construction and are less sensitive to system contamination than most other hydraulic pump designs. The vane design produces a more smooth supply of oil that minimizes "hydraulic ripple". A desirable feature in all hydraulic systems.
PFVI vane pumps are hydraulically balanced designs that reduce bearing loads thereby minimizing maintenance and maximizing service life. The cartridge style design of the rotating group allows for quick and cost efficient servicing.
Combining this broad selection of fixed vane pump displacements and optional features with Parker's complete offering of gear, piston and variable vane pumps enables selection of the best pump for your demanding hydraulic requirements
|
|
"Compact Brawn"
* Inlet and Delivery Check Valves are Positively Seated for High Efficiency
* Hardened Steel Pistons Located in Stationary Cylinder Allow for High-Speed Operation
* Integral Supercharge Pump
* Thru Drive Available
* Rugged, High Response, Lightweight Poppet Construction Assures Long Life
* Multiple Deliveries
|
|
he feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief valve. The charging pressure of this valve starts at approx. 20% below nominal pressure setting, which causes a reduction of the flow rate in this pressure range. Please follow Operating and maintenance instructions.
SPECIAL FEATURES
- vane type pump for low pressure range
- direct drive, i.e no bell housing or coupling required
- compact design
APPLICATIONS
- filter circuits
- cooling circuits
- lubrication applications
- pump transfer units
|
|
Our hydraulic equipment plays an essential role in power and controlling in the constructionmachine industry.
With a tightly knit international network, NACHI EUROPE GmbH is excellenty positioned to build your sucess in the European marketplace.
NACHI, the comprehensive mechatronics manufacturer with a long tradition and innovative technology helps you enhance your business potential in Europe.
|
|
Sauer-Danfoss offers a wide variety of open circuit products. Our fixed and variable displacement pumps provide power for work functions of on- and off-highway vehicles and equipment in the fields of agriculture, construction, material handling, many others.
Fixed displacement gear pumps and motors and variable displacement piston pumps are a perfect choice when equipping applications like forklift trucks, tractors and road rollers.
Our portfolio includes tailor made pump solutions, in which several functions are integrated in one body to optimize size and cost. By combining products we can offer system solutions for buses, wheel loaders and other heavy equipment.
|
|
|
|
