|
|
Axial piston variable displacement pumps, Series 20, are of swash plate design with variable flow capability uitable for hydrostatic transmissions with closed circuit.
The flow rate is in proportional relation with the input pump speed and continuously variable displacement, which, in turn, is determined by the swash plate angle and is adjustable between zero and maximum value of the displacement. Flow direction is reversed by a tilting of the swash plate to the opposite side of the neutral or zero displacement position.
|
|
Variable displacement axial piston pumps of swash plate design series 3K-10 are designed for various applications working in closed hydrostatic circuit.
Fluid flow is in proportional relation with speed and displacement of pump, which can be increased with changes of swash plate angle from zero to maximum. Standard pump is equipped with internal charge pump - G-rotor type, manifold assembly with block of flushing and two pressure relief valves on the high pressure ports. Relief valves protect the hydrostatic transmission from overloads. Standard pump is equipped with mechanical - hydraulic servo valve with mechanical feedback. Tightness of the case around the exiting part of the shaft is protected by the shaft seal for max. pressure 0,25 MPa (intermittent 0,5 MPa).
|
|
|
|
|
|
PVK units are axial piston pumps of slipper design. Rotor of this pump is driven by shaft which is supported by 2 roller bearings. Inside of the rotor, there are moving 9, hydrostatically balanced, pistons parallel with an axis of rotation. They are slipping on the inclined thrust plate which is placed inside of the swash plate and this way, the pistons are moving with a straight-line motion.
They create 1 suction and 1 pressure stroke per revolution. Fluid direction is performed by frontal rotational distribution. Single cylinders are joined either with a suction channel or a pressure one of the end cap during a motion of the distributor. Swash plate angle is possible to regulate continuously with various ways of control and automatic regulations (mentioned in 5, 5.1 and 9.1) which are part of axial piston pump.
These units are designed for conversion of mechanical energy into pressure one. They can be used in closed loops of various machines (e.g. road, construction, grading, agricultural, forest, mining etc.) where is demanded a continuous change of input parameters. The loop has to be designed such way that pump parameters, which are determined by technical conditions and project of the specific application , must not be exceeded during an operation.
|
|
With our Aluminium Gear Pumps and Motors we can offer a complete product range for a wide arrenge of applications
High efficiency
Cont. pressure up to 275 bar admissible
Low noise
Wide choice of integrated valves
|
|
The InLine variable displacement pump type V30D and V30E work according to the swash plate principle and are intended for open circuit operation in industrial and mobile hydraulics. There is also an option for a thru-shaft for flange mounting additional variable and fixed displacement pumps. Type V30E is intended as successor of V30D, where the completely new development allowed to realize state of the art pump design. This concerns primarily the optimization of self-suction speed rating, minimized noise level, weight, and pulsation as well as increased service life.
These pumps are suited for a wide range of applications due to their low running noise and various pump controllers.
Hydraulic circuits where several outlet flows are required can be fed either by one individual pump or a multiple pump. Main benefit of these pumps are the sturdy design, the good performance/weight ratio, long service life
due to oversized bearings, and the swash plate angle indicator.
|
|
The T1-51, -81, -121 fixed displacement pump has been specifically developed to meet the requirements of light duty truck applications with short, non-frequently operating cycles such as tippers and small loaders.
Input power up to 71 kW
Shaft speed up to 2300 rpm
Operating pressure up to 350 bar
High overall efficiency
Low weight
Small intalled envelope
Proven reliability
Easy servicing
|
|
Atos PVPC pumps are variable displacement axial piston pumps for high pressure operation on industrial applications at low noise level
• 4 basic models up to 100 cm3/rev
• pressure up to 280/350 bar
• full line of electrohydraulic servocontrols, by analog or digital electronics
- vane pumps, fixed displacement, cartridge design, with integral hydraulic balancing, low noise level
|
|
With our Cast Iron Gear Pumps and Motors we can offer a large variety of robust motors for high-demanding applications.
Patented 2-piece modular design
Volumetric efficiency up to 98 %
Cont. pressure up to 310 bar admissible
Low noise
Wide choice of integrated valves
|
|
The F1 offers many additional values for operators of cargo cranes, hook loaders, skip loaders, forest cranes and heavy duty demanding truck applications.
Higher selfpriming speeds
Operating pressures to 400 bar
New frame sizes to meet market requirements
Higher overall efficiency
Increased reliability
Reduced noise level
Smaller installation dimensions
Series F2 is a further development of the twin-flow version of Series F1, the very first bent-axis truck pump on the market with two entirely independent flows. Typical applications include large truck loaders, forestry cranes, hook loaders, refuse collecting vehicles, concrete mixers and tipper/crane combinations.
Less energy consumption
Reduced risk of system overheating
Lower weight
Smart system solution means easier installation
High overall system efficiency
|
|
|
|
|
|
The SP700 and VP700 are new battery powered backpack units weighing no more than 18KG providing hydraulic power for cutting tools, and other hydraulic equipment such as Jaws of Life® and hydraulic jacks as used by emergency services and in many other situations.
Jon Lye, Managing Director of GSF explains: “The uniqueness of the Interfron range definitely improves emergency operations; it’s an innovation in design and one we believe will make a dramatic difference to the industry.”
Indeed the range of battery powered backpacks are unique in the respect that it gives emergency crews complete freedom from petrol driven or vehicle mounted power supplies; no hydraulic extensions and no attachments mean no entanglements, which, in low visibility high risk environments, reduce accidents and increase access to enclosed and otherwise inaccessible spaces.
At the heart of the range is the SP700 and the VP700, both of which can be fitted with the appropriate hydraulic connectors, enabling the units to operate rescue tools from all major manufacturers, including: Holmatro, Amkus, Lukas, Zumro, Weber, TNT, Lancier, Nike Centaur, ResOtec and Enerpac. The units can be adjusted to use hydraulic pressure at 5100, 9200 and 10500 psi. Each unit has a total weight (approx) 18kg (40lbs).
This Interfron range represents a very exciting addition to GSF’s long established market leadership on high strength shock resistant telescopic slides, and our state of the art Promounts range of mounting gear, used to secure every type of gear and equipment onto emergency and defence vehicles.
- Jaws of Life® is a registered trademark of Hale Products, Inc.
|
|
Oil hydraulic systems and lubrication circuits demand circulation pumps for various applications. Main request for such pumps is an operation with little pressure ripples and low noise emissions. Gerotor pumps are an excellent answer to these requirements. This design based on the principle of internal gear pumps features low noise emissions and little susceptibility to particulate contamination, thus makes it an ideal pump for off line filter units.
BFP series
Low noise emission
Good suction pressure
Compact dimensions
Low sensitivity to particulates
Ideal for the use in off-line filters and coolers and for the circulation of lube oils
|
|
Atos PFE fixed displacement cartridge vane pumps offer: high performance, low noise level, excellent versatility and long
service life.
• 3 basic models
• full interchangeability of cartridges
• 13 displacements: 16 to 150 cm3/rev
• pressure up to 210 ÷ 300 bar
• mounting according to ISO, SAE and DIN standards
|
|
|
|
|
|
The Enerpac ZA4 - The Next Generation in Air Powered Hydraulic Pumps
Introducing the ZA4-series, Enerpac’s newest high-pressure hydraulic air-driven pump designed for in-plant, industrial applications and medium to large construction projects. The new ZA4 pump features the Z-Class high efficiency pump design—a design known for its higher oil flow and bypass pressure. Whether powering a cylinder or operating a tool, the ZA’s industry-leading hydraulic flow at 700 bar will improve productivity in any application. And, because of their ATEX 95 certification, the Enerpac ZA Pumps are safe for use in environments such as refinery, petro-chemical and oil & gas processing.
Reservoirs come in 4 to 40 litres capacities. A sight gauge on the 4 and 8 litres models and a level gauge on the larger reservoirs allow quick and easy oil level monitoring. The manual control valves on ZA4-series pumps come with built-in user adjustable pressure relief valve. Standard models are available to fit most applications and custom configurations, when required, are available from an extensive ordering matrix.
The optional heat exchanger warms exhaust air to prevent freezing and cools the hydraulic oil.
Enerpac ZA Series Air Hydraulic Pumps—tough, dependable and innovative.
|
|
|
|
|
|
Hydratron Air Operated Hydraulic Pumps are capable of generating output pressures of up to 45,800 PSI ( 3,160 Bar ) when supplied with just 100 PSI ( 7 Bar ) air pressure. There are 4 model ranges offering flows of up to 7 gpm ( 31.7 Ltr per min ).
These pumps will maintain pressure within a system indefinitely without consuming power or generating heat plus their output pressure can be infinitely varied by simply regulating the driving air pressure.
These pumps are ideal for pressure testing, chemical injection and for hydraulic power applications. Standard models are suitable for oil or water service having wetted parts manufactured from stainless steel and aluminium bronze. Options include all stainless steel wetted parts for pumping more aggressive chemicals with isolation chambers which keep the pneumatic and hydraulic sections of the pumps completely separate. This is particularly desirable when pumping hazardous fluids.
Pumps can be supplied individually or mounted in Power Pack form in which case they are mounted within metal frames complete with reservoirs, all necessary air controls, output pressure gauges and pressure release valves.
|
|
- Air Drive line lubrication not required.
- Self-priming for immediate operation.
- Compatible with all hydraulic fluids, plain water, distilled &
deionized water, solvents, mild chemicals and most liquefied
aerosol type gases.
- Range of models to provide up to 80,000 psi intermittent
output pressure.
- Stainless steel hydraulic body, check valves, and trim are
standard, except -4 and -7 models.
- Alternative gases that can drive the pump include nitrogen,
vapor from liquefied gas, pipeline natural gas and sour
natural gas with proper modifications.
- Offer a wide range of standard modifications.
|
|
SKF Air-driven Hydraulic Pumps, THAP series
30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi)
The THAP Air-driven Hydraulic Pumps are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The pumps consist of a high-pressure hydraulic pump, driven by an air piston.
The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets, which consists of pump, pressure gauge, adapter block, highpressure pipe and connection nipples.
|
|
The air-hydraulic BELL units are meant to operate single and double acting cylinders depending on the versions. This type of pump can be applied in all the hydraulic applications, especially in those which require high performances and pressures, and in all cases in which the oil flow must be modulated and controlled.
There are many applications, in the industiial field, such as stirrup, presses, extractors, pullers, hose fitting, bead breakers, clamping equipments, as well as in the automotive field for example car and motorbike lifts, pulling bars for bodyworks straightening benches.
|
|
Gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy.
The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications.
|
|
Features
- High efficiency gear profiles
- 12 tooth low noise and pressure ripple gear design
- Continuous operating pressures to 276 bar [4000 psi]
- Rated operating speeds to 4000 rpm
- 10 displacements available from 5.3cc [.32cid] to 33.4cc [2.04cid]
- Input shaft torques up to 160Nm (1418 lb-in)
- SAE, DIN, & ISO flange, shaft, and porting styles
- Field reversibility
- Built to ISO 9001 standards
Customizing Options
- Single and multiple section pumps
- Isolated sections for applications requiring separate fluids or reservoirs
- Common and separate inlets
- Relief valve and priority control valve options
- Auxiliary mounting features
|
|
|
|
|
|
M Series pumps are open circuit, axial piston designs. A variety of controls provides the ability to match the pumps to each application.
A strong, proven rotating group allows the pumps to handle pressures to 280 bar (4000 psi) continuous and 320 bar (4600 psi) intermittent - with less maintenance cost. Each frame can also contain a 230 bar (3300 psi) higher flow rotating group that provides additional application flexibility. High-load bearings and a stiff drive shaft help provide a pump life of 30,000 hours (@ 65% rated pressure), reducing operating costs and extending machine life.
M Series pumps feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size that allows installation in tighter locations.
M Series pumps operate at a level of quietness that exceeds the requirements of today's demanding industrial conditions. The pumps feature a unique three-piece envelope (flange, housing and valve block) specifically created for low fluid-borne and structureborne noise levels. Another pump feature - a bimetal timing plate - improves pump filling characteristics that, in turn, reduces fluid-borne noise and extends pump life.
|
|
Gear pumps made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1
|
|
Fixed displacement bent axis piston pumps.
STRADA pumps are ideally suited for PTOs applications in vehicles.
Displacements from 2.49 in³/rev (40,9 cm³/rev) to 6.71 in³/rev (110 cm³/rev) available in groups 32 and 37.
Max. peak pressure up to 5800 psi (400 bar)
Max. speed up to 2950 min-1
|
|
PL PUMPS
Fixed displacement
For open loop circuits
Up to 450 bar [6 530 PSI] pressure
Sizes 10 to 444 cm³/tr [0.63 to 27 cu.in/rev]
In line radial pistons
High speed for engine drive
High efficiency
High durability
Independent output flows
|
|
Gear pumps and motors made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1
High operating pressures
High efficiency at high temperature
Low noise emission
Exceptional working life expectancy
Solid and compact design
Custom design
|
|
G4 Standard Electric is Powered by a 115V - 60HZ, 1-1/2 hp induction motor (1,725 rpm); low startup voltage, draws 16 amps at full load (230V models available).
G4 Gas pump is powered by a 4 hp Briggs & Stratton gas motor.
Electric models are equipped with a 15’ remote power controlled pendant.
Reservoirs available in 1.5-20 gallons; welded steel designs.
Recommended for mid-sized or multi-tool operation - 55 cu.in. flow group
Ideal for remote service application or in-plant production applications requiring quiet – continuous cycling
|
|
The quality, expertise and experience to deliver to your precise requirements.
Hydrokraft piston pumps and motors are renowned worldwide for their robustness and reliability. Hydrokraft offers a complete range of open and closed circuit pumps and motors available in fixed and variable inline design from 66 - 750 cm3 per revolution. Larger displacements can be achieved using combinations of our pumps and motors.
Hydrokraft manufactures high-pressure axial piston hydraulic pumps, motors and transmissions for applications in stationary industrial equipment, marine, mining, chemical processing, primary metals and other markets in open circuit or closed circuit applications.
|
|
Features:
Volumetric efficiency is over 95% and overall efficiency is more than 90% at
1800 r/min.
High performance at maximum pressure 35MPa
A3H series are compact in size becauseoutput / mass ratio is large.
|
|
DVQ-25 DURABLE DESIGNED HIGH PRESSURE PUMP
The maximum pressue:250 bar
Displacement:18/22/26/32/38/43/47/52/52/60/65/75
Aplication:
Shoes making machine, Plastic and rubber molding mahcine,
press brake machine, press shear and steel sheet forming machine.
|
|
With its new PRO high-pressure range, KMT Waterjet Systems sets new standards in the field of waterjet cutting. PRO stands for waterjet cutting technology with operating pressures of up to 6200 bar. The new range of products includes of course all necessary components and accessories - from high-pressure generation units to orifices that guide the cutting jet with great precision onto the material. The maximum pressure of 6200 bar represents an increase of nearly 50% over pressures used in conventional equipment!
The advantages offered by this leap in technology are obvious:
- Higher cutting speeds
- Improved cutting edge quality
- Lower abrasive consumption
|
|
Feature:
Max. Pressure:245 kgf/cm2
Max. Speed :1800 RPM Min. Speed: 600 RPM
Application: Hydraulic press machine, fishing boat,
lift truck, plastic injection machine.
For detail product dimensions, performance characterisitics and order code, please visit our web site:www.kcl.com.tw
|
|
|
|
