- Hydraulics - Pneumatics >
- Valve >
- Hydraulically-operated valve
Hydraulically-operated valves
DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi
Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...
Galli & Cassina S.p.A.
DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C
... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...
Zhejiang Ouming Fluid Casting Industry Co., Ltd.
Pressure: 24.5, 245 bar
... Clamptek CSV hydrulic sequence valve is designed to provide reliable and exceedingly efficient performances. The masterful design has been patented and its high quality is endorsed by its loyal and expanding customer ...
DN: 50 mm - 1,200 mm
Pressure: 4 bar - 10 bar
Temperature: -30 °C - 200 °C
... during opening-closing or the surface can be washed or cleaned with pressurized air. V305 series valves can be operated with pneumatic , electric or hydraulic actuator ...
DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C
The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...
DN: 50 mm - 600 mm
... and 106-PTC series control valves have full port, double chamber and hydraulically operated valves. It maintains a positive control over all its operating pressures. ...
DN: 50 mm - 150 mm
Pressure: 16 bar - 40 bar
... with graduated regulating slots Fitted with hand wheel, electrical actuator or hydraulic or pneumatic actuator piston Product Description In water mains of sizes DN 50 to DN 150, ERHARD ...
Pressure: 0 bar - 200 bar
Flow rate: 120 l/s
... VF1200 from Husco International is a type of hydraulic control valve that features a WP Flow rate of 120 lpm, maximum pressure of 200 bar, and 52 mm section thickness to accommodate direct mount couplers. ...
Husco International
DN: 50 mm - 1,400 mm
Pressure: 16 bar
... Stainless steel cast Aluminiumbronze / bronze Sealing - Rubber seat Operation - Lever Worm gear Pneumatic actuators Electric actuators Hydraulic actuators
Wouter Witzel EuroValve B.V.
... Robust fabricated construction of carbon steel, with high-performance bronze or stainless steel seats. May be equipped with air vent piping system to avoid cavitation and with by-pass for pressure balancing. Wide range ...
ORBINOX
DN: 0.25 in - 0.375 in
Pressure: 210 bar
Temperature: -30 °C - 120 °C
Proportional Valves Smooth, accurate control is a must for most pressure and flow applications, so Eaton developed an entire range of Screw-in Cartridge Proportional Valves (SiCV) to help with achieving ...
DN: 144 in
Red Valve manufactures the Series G in line sizes up to 144" for large-diameter pipeline installations. Large Series G valves are constructed similarly to smaller valves but feature a ...
DN: 0.375 in - 2.5 in
Temperature: 40 °F - 275 °F
... ® 56-T Series Temperature Actuated Water Regulating Valve evenly regulates cooling water and other fluids in the most rugged applications. It’s ideal for hydraulic power packaged equipment, hydraulic ...
DN: 16 mm - 160 mm
Pressure: 350 bar
Hydrodynamic distributor for 3/3 valve with pilot oil Working pressure of 350 bar. Min. DN16 Max. Dn160 TECH-Euroengineering designs and builds any hydrodynamic distributors (water) for forging ...
Pressure: 250 bar
Temperature: -20 °C - 100 °C
Flow rate: 180 l/min
Monoblock and sandwich designs All types of circuit diagrams Integrated relief valves and optional flow regulator Max. flow rate 180 l/min Max. working pressure 250 bar
Pressure: 30 bar - 240 bar
Kurt PRV-M-02-4 valves are used for controlling system pressure for all subsequent valves based on adjusted pressure. They provide precise control of hydraulic pressure. They are suitable ...
DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C
GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...
A 3-way relay valve, activated by hydraulic or pneumatic pressure command, opens or closes the main valve. The standard valve is supplied in the "normally ...
DN: 6 mm
Pressure: 0 bar - 290 bar
The UZRR6 Pressure-Reducing Valve is size 6, and has a maximum working pressure of 31.5 MPa. Its flow rate reaches up to 50 dm3/min. The valve is designed with a main valve and a pilot ...
PONAR S.A.
Dimensions: DN13 to DN25 body: S355J2G3, stainless steel (1.4571/316Ti) ball + stem: stainless steel (1.4571/316Ti) sealing: plastics Pressure range: up to PN800 or PN700 for stainless steel (note table of dimensions) Field of ...
Pister Kugelhähne
... the valve can be completely adapted to the customer requirements. As standard designed for 50 mWC with posibility to be designed for higer or lower pressures. The gate is actuated by an hydraulic cylinder. ...
DN: 50 mm - 200 mm
Pressure: 125 psi
... required bleeding of trapped air from the diaphragm chamber during installation • Accurate pressure control • Epoxy coated internal and external • One piece, one moving par t diaphragm • In-line service • One pilot ...
DN: 3 in - 24 in
... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional ...
DN: 3 in - 24 in
Pressure: 150, 300 psi
Air cylinder actuated knife gate valves are available from 3" to 24" in size. Available in standard pressure ratings of 150PSI (ANSI B16.5 Class 150), heavy duty fabricated carbon steel or stainless steel ...
Pressure: 2,000,000 Pa - 30,000,000 Pa
Temperature: 0 °C - 70 °C
This is a pressure balance valve which operates in sequence to prevent deformation of the workpiece when it is released in cases where the workpiece support and actuator are used opposite one another.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining