|
|
HUMIPORT 05/10/20
Handheld Thermo hygrometers
Handheld thermo-hygrometers of the HUMIPORT series set new standards because of the combination of the latest technology and design. HUMIPORT thermo- hygrometers offer very accurate measurement of relative humidity and temperature and also calculation of dewpoint temperature and absolute humidity.
Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow use in tough industrial environments.
3 models are available:
HUMIPORT 05: Compact handheld thermo / hygro- meter with fixed sensing probe
HUMIPORT 10: Handheld thermo / hygrometer with fixed sensing probe
HUMIPORT 20: Handheld thermo / hygrometer with flexible sensing probe
OMNIPORT 20
Multifunctional Handheld Instrument
To measure various climate and processes values with a handheld, user-friendly instrument requires extraordinary measurement technology. The handheld meter of the OMNIPORT 20 series meets these multiple demands.
The selection of the appropriate sensing probe and accordingly the configuration of the handheld meter allow for displaying the following values with the highest accuracy:
relative humidity RH
temperatur T
dew point temperature Td
absolute humidity dv
mixing ratio r
air velocity v
water activity (in oil) aw
water content (in oil) x |
|
%RH, C td/tpd, gm3, g/kg,aW, C, J/g, hPa, U/min, mA, VOL% CO2, ppm CO
Reference humidity: Inter-laboratory test in national/international institutes confirms sensor accuracy of 1 %RH
Precision temperature: System accuracy up to 0.05 C, resolution up to 0.001 C
Probes for measuring the process and indoor air humidity
Calculation of all parameters of the psychrometric chart
Convenient measurement data administration, reading memory up to 500,000 readings |
|
The B&B Hygrometers are available in two versions. Either with an integrated probe or with an external temperature and moisture probe:
HANDY HYGROMETER
for fast and precise measurements of temperature and humidtiy with integrated internal sensors.
- Measuring ranges: -20 to 50C, 0% bis 100% RH
- Various memory features
- Calculation of dew point
- Dual Display: temperature and humidity
ACCURATE HYGROMETER TH309 (see picture)
offers high measurement accuracy up to 1% of the relative moisture and a dew point determination down to -40C. If wished special measurement devices can be realised to best fit the requirements of the customer. Moreover different hand probes of the series TH309 can be connected to the hygrometer without need of new calibrations.
- Temperature: -20 ... 80C, depending on sensor
- Humidity: 0 ...100% RH
- Various memory features
- USB Interface
- Data recording with B B Thermo Log or Thermo View software
- Humidity readings switchable: RH, absolute humidity, dew point
For further information have a look at our temperature-shop:
www.temperature-shop.eu
Our further product range:
- Industrial temperature sensors
- Temperature Humidity transducers
- Thermocouple Manufacturer of connectors
- Manufacturer of temperature measurement Instruments
- Digital-Industrial thermometer
- Professional infrared thermometer
- Data logger
- Professional recorders
- Stationary Pyrometers
- Controllers
- Indicators
- Professional transmitters |
|
Industrial transmitters of the EE21 series have been developed for high-precision measurement of relative humidity and temperature. EE21 transmitters are available for wall and duct mounting with or without the very useful
snap in-mounting kit, which allows a quick and easy exchange of the transmitter.
Outputs can be selected between voltage and current. An optional radiation shield providing a forced ventilation is recommended for use in outdoor applications.
Special protection coating for the sensing element permits the permanent use in very pollutedenvironments.
Measuring range: 0...100% RH; -20...60 C
Outputs: 0...1/5/10V or 4...20mA
Accuracy: +/-2% RH; +/-0.3 C
Supply: 24V AC/DC
|
|
The design of EE07 humidity and temperature transmitter series is based on a new electronic concept and on the SMD miniaturized E+E humidity transducer element type HC103.
EE07 professional transmitters are fully interchangeable, the connector specifications enables their replacement within few seconds.
Calibration and sensor element data such as linearization and temperature compensation are stored in the elec- tronics integrated in the probe.
Digital E2Bus output signals for humidity and temperature allow easy and cost-effective interfacing to customers' electronics.
The choice of professional filter caps make the EE07 suitable for a large variety of applications.
Technical data
Measuring range: 0-100% RH; -40...80C
Outputs: Digital output (E2Bus, 2 wire)
Accuracy: +/-2% RH; +/-0.3C
Supply: 3.8 - 5.5V DC
|
|
EASIDEW On-line Hygrometer
-100 to 20C total dew point range
Vacuum to 40MPa
Dual alarm
IP66 rated sensors (electronics IP54 rated)
Optimal dew point range: -80C to 20C
Operating temperature: -40C to 60C
Best accuracy: /-2.0C
Output: 4-20mA
|
|
| WaSul-Hygro is a fully automatically operated, professional laser based water vapor industrial monitoring system. It has a very wide measurement range (from 0.3 ppm. up to 25000 ppm.) and its response time is about a few seconds. It can measure water vapor in up to 3 independent gas streams. WaSul-Hygro can be operated under harsh conditions. Measured water vapor concentration can be stored in the systems internal memory for a measurement period of about two months, or can be transferred to a PC or to a data logger through RS232/RS485, Modbus, or 4-20 mA. It can be supplemented with an additional laser for measuring other gas components (methane, ethane, oxygen, ammonia etc) as well. One WaSul-Hygro system is operated on-board of a passenger aircraft within the CARIBIC project (www.caribic-atmospheric.com ) since May 2005, and successfully completed more than 30 flight campaign. Other WaSul systems are operated e.g. in natural gas plants. The expected trouble free operational lifetime of a WaSul-Hygro system exceeds ten years. Each WaSul-Hygro system is delivered with a certificate of calibration, which is issued by an accredited calibration laboratory. |
|
HUMIPORT 05/10/20
Handheld for the measurement of: realtive humidity, absolute humidity, dew point, mixing ratio and temperature
OMNIPORT 20
Multifunctional handheld instrument for: relative humidity, absolute humidity, dew point, mixing ratio, temperature, air velocity, water activity in oil and water content in oil
THERMOPORT 20
Handheld Professional thermometers
Handheld thermometers of the THERMOPORT series set new standards because of the combination of the latest technology and design. Excellent readability of the very large and illuminated display, the simple thumbwheel operation and the very robust case also allow
usage in tough industrial environments.
Two measuring channels, one to connect a Pt100 probe and the other to connect a thermocouple manufacturer probe (E/K/J/N/R/S/T type), provide measurements between -200...1200 C (-330...2200F).
Many different sensing probes allow the exact adjustment to the particular application.
VELOPORT 20
Handheld for the Measurement of Air Velocity and Temperature
|
|
Function : Absolute and relative humidity, temperature, dew point.
Large choice of probes :
- ABS hygrometry probe (wired or wireless)
- Stainless steel hygrometry probe (wired or wireless)
- 4 thermocouple manufacturers inputs
- Pt 100 temperature probe
- Storage : 8000 points of measurement
> Hygrometry : from 3 to 98%HR
> Absolute humidity : from 0 to 285 g/Kg
> Temperature : from -50 to +250C
Supplied with calibration certificate. |
|
CERMAX Portable hygrometer
Extremely fast response
-120 to 20C total dew point range
Vacuum to 30MPa
Multiple engineering units
RS232 data logging inbuilt
IP65 rated
Re-chargeable batteries
Optimal dew point range: -100C to 20C
Operating temperature: -20C to 50C
Best accuracy: /-1.0C
Output: RS232
|
|
HI 9564 and HI 9565 are two new portable thermo-hydrometers designed to provide excellent performance in harsh environments and poorly lit areas.
A microchip built into the RH probe, HI 70602, can store calibration data. When the probe is connected to another hygrometer, the microchip transfers the stored calibration data and eliminates the need to recalibrate the instrument.
Both instruments feature auto-off after 20 minutes of inactivity, temperature readings in Celsius and Fahrenheit, and on-line help to indicate anomalies and direct procedures.
In addition to RH and temperature, HI 9565 will display the dew point with the professional press of a button. The dew point indicates the presence of water vapor in the air at a given temperature. With this feature HI 9565 permits useful and rapid environmental monitoring where a controlled microclimate is necessary, like greenhouses, museums, cleanrooms and laboratories.
|
|
| In many high purity gas applications, such as the semiconductor industry, the residual moisture content of the gas is critical to satisfactory operation of a process. Historically trace moisture measurement has been a difficult exercise, demanding the use of complex moisture analysers or expensive analytical techniques. Now Michell has brought to market a simple, economical and very effective solution for on-line measurement of dew-point temperatures down to -120 C (equivalent to less than 1 part per billion). The PURA professional transmitter benefits from Michell's experience and expertise in the production and calibration of impedance dew-point sensors. Incorporation of industry standard materials and manufacturing processes gives the first low cost transmitter suitable for large-scale integration into a semiconductor fabrication plant or high purity gas line. |
|
| S8000 Integrale is a reference dewpointmeter combining the ultimate measurement sensitivity and accuracy with portability for accurate field or calibration measurements |
|
Optica Hygrometer
The Optica Hygrometer offers precision dew point measurement. Precisely controlled by GE's chilled mirror sensing technology - providing NIST traceable humidity,temperature and pressure metering anywhere via the worldwide intranet.
The Optica Hygrometer measures dew point temperature by regulating the temperature of a polished metal mirror by the use of optical feedback such that a constant mass of dew or frost is maintained. The temperature of the mirror is measured with a precise PRTD and is by definition equal to the dew or frost point.
Features & Benefits:
Simultaneously measure and display dew point, temperature, and pressure
Display any humidity parameter
Ethernet ready, so you can access GE Optica hygrometers via the Internet for remote monitoring applications
Data logger function lets you record & upload weeks of data
Primary NIST Traceable Humidity Transfer Standard
Accuracy to +/- 0.15C
|
|
TH-2A Temperature and Moisture probe
- For industry, laboratories and hospitals
- Temperature measuring in F or C
- Humidity measurement (relative humidity R%)
- MIN and MAX storage with time indication
- Auto power off
- DATA HOLD
- Dual LCD display |
|
- Fast response time
- 3% accuracy, Relative humidity (RH) 10- 25%
- Temperature -5° to 175°F (-20° to 80°C)
- Data record function for maximum and minimum temperature
and humidity reading
- Serial output through RS 232C
- 39†cable length, hard wired
- Data hold and Auto Power Off
- Protective professional boot included |
|
Applications:
Compact thermohygrometer with a lot of features, perfect
for measuring ambient conditions:
HVAC, food storage, buildings, offices, production plants.
Easy to use: For detecting critical temperature-humidity
environments, e.g.: mould in living quarters
- Building industry
- HVAC
- Education
- Laboratory
- Food (process & storage)
Features:
- Very fast capacity humidity transducer from the switzerland
- Indicates dewpoint and wetbulb
- 1-second measuring interval
- MAX-MIN-HOLD-Function
- C/F-switchable
- Switchable Auto-off-function
- Incl. pouch and stand |
|
| The TRH22 measures relative humidity (RH) and temperature. It measures humidity from 0% to 100% and professional displays temperature from -20 C (-4 F) to 60 C (140 F). in either Fahrenheit or Celsius. Dual display shows both values simultaneously. |
|
The Elcometer 116A Whirling Hygrometer is available in either a C scale.
A guide for Relative Humidity (RH) Calculation is supplied with each instrument. The dewpoint can be accurately obtained using Elcometer 114 Dewpoint Professional calculator.
The Elcometer 116C Bacharach Sling Hygrometer is a convenient, self contained instrument with a built in industrial slide rule for the calculation of %RH and dewpoint. It has spirit filled industrial thermometers and is also available in C or F industrial scales.
Lightweight and compact
Manual operation - no switched mode power supply required.
Measuring range: -5 to 50C (30 to 110F)
RH Accuracy: 5% RH |
|
The HN-CH series is accurate palm-sized temperature/humidity measuring device with the measuring range of 0 to 100%RH by using a high performance and reliable humidity detection.
Three types of detection, sensor built-in type, probe type and separated type can be selected to meet various applications requirement.
It also has the data logging function capable to store up to 8000 readings each of temperature and humidity into memory, and communications function (RS232C or RS485) for various use such as mobile measurement, desk-top and wall-mount.
|
|
The General Eastern product line offers portable moisture instruments that can be used in a variety of gaseous applications. Our industrial analyzers are well balanced, compact, easy to use and come complete with all the units of measure and connectability required to keep track of the moisture critical processes in your facility.
MMY245 Moisture analyzer For a Speedy Response
The MMY245 Moisture Analyzer is a convenient, portable instrument that can quickly spot check the performance of gas professional dryers for pneumatics, breathing air, and pure gas supplies. The planar capacitive detector combines accurate dew point measurement with fast response time. The sensor is stored in a very dry environment within the analyzer between measurements, which speeds response time. |
|
The HM70 is a user-friendly meter for demanding spot-checking humidity measurements. The HM70 is ideal for field checking and calibration of Vaisala's fixed humidity instruments such as the new Vaisala HUMICAP Humidity and Manufacturer of temperature transmitter Series HMT330.
Three probes are available:
%u2022 HMP75 general-purpose probe
%u2022 HMP76 long, stainless steel probe, especially suitable for spot-checking in ducts
%u2022 HMP77 with a small sensor head at the end of a 5-meter cable, ideal for difficult-to-reach areas and for on-site calibration of Vaisala's process industrial transmitters.
The HM70 features a multilingual, menu-based user interface, and a clear graphical LCD display. Three measurement parameters can be displayed and logged into the meter's memory at the same time. An analog output option is also available.
|
|
Humidity Measurement Technology
Hand-Held Humidity Measuring Unit HND-F
Humidity/temperature Measuring Instrument (hygrometric method) AFH-G
Humidity/ Temperature Measuring Instrument (capacitive) AFK-G
Humidity/Temperature Instrument (capacitive) AFK-E
Humidity Measuring Instrument with Indicator (capacitive) AFA-G
Humidity Annex Switch AFS-G3
Hygrostat AFS-G1
Room Hygrostat AFS-G2
Universal Bussystem KOBUS
|
|
As concrete structures are porous they can absorb moisture. It is therefore often necessary to measure and monitor the moisture content within the concrete.
Other substrates, which may have a high moisture content, include timber, fibreboard, plasterboard, gypsum and brick.
Elcometer 7420 Digital Moisture meter
This handy and easy to use instrument does not use pins and does not damage the substrate under test. The gauge is placed onto the material to be evaluated and quickly indicates the degree of moisture in concrete, fibreglass or wood down to a depth of 3cm (1.2")
|
|
| ... products without technical information |
| |
... see all the products in the category
| |