- Robotics - Automation - Industrial IT >
- Automation >
- I/O module
I/O modules
Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile monitoring and ...
ADVANTECH
- 12-ch DI, 6-ch DO, Ethernet-based smart I/O - Remote monitoring and control with mobile devices - Group configuration capability for multiple module setup - Flexible user-defined Modbus address - Intelligent control ...
ADVANTECH
- USB 3.0 SuperSpeed - Daisy chainable by built in USB hub - 16-ch digital input and 16-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and ...
ADVANTECH
SENSOR/ACTUATOR BOXES Sensor/actuator boxes, which are installed directly on machines or systems, are passive distribution systems for signal transmission that is rapid, cost-effective and, above all, cabinet-free. Thanks to the fully ...
Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...
Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement in installation space and wiring work. • Industrial standard e-CON connectors require ...
Our Value Design Products Increase the Value of Your Control Panels. I/O Relay Terminals with 16 Points and Push-In Plus terminal blocks to Downsize Control Panels and Save Labor. • I/O Relay Terminals with 16 points to mount G2RV ...
The I/O system 1000 offers a precise control of input and output modules, including the import of touch probe inputs which are needed for synchronized movements in cyclic production processes. A minimum internal cycle time combined with ...
Safety in the system does not begin with the drives first, but at the control level. With the c250-S safety controller, a complete automation solution is provided for safety engineering and control and drive tasks. Topped with the safety ...
Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...
Pixsys
The Module SOC-8 is made for controlling the minimal-power output devices through RS-485. With this, it search its function in distributed control and visualization systems. This function can straightly control other DC loads having 24 ...
SIMEX Sp. z o.o.
The Module SIAi-8 is made for enabling the measure analog ranges from 8 current inputs through the RS-485 connection with a speed rate of 10 Hz. Due to one of available capabilities, measurement results can be recalculated. Those capabilities ...
SIMEX Sp. z o.o.
Pulses delivered independently to eight isolated binary inputs are counted by the SLI-8 multi-counter module. It is 24bit long and can be cleared or read by the operator at any time. The LEDs signaling the occurrence of high states on ...
SIMEX Sp. z o.o.
Cube20 is a centralized IP20 I/O station with modular function modules and the ability to connect direct to Cube67 modules. The compact modules have a high signal installation of up to 32 channels in one module. This significantly reduces ...
MURRELEKTRONIK
The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented override operation. Types - ...
The programmable I/O modules of the Saia PCD1 E-Line series with Saia PG5® enable the autonomous and safe operation of the modules even if communication to the master station is interrupted. The local function of a room, for example, ...
The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition to the L-Series. ...
Increased flexibility without PLC Used together with a Controller, the JVL Input-Output Module extends the number of inputs from 10 to 26 and the number of outputs from 3 to 11. Each I/O Module has 16 inputs and 8 outputs. Up to 31 ...
4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...
Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input 4x analogie output, 0…2/5/10/±10 ...
Combined module of digital inputs and outputs with open collector PNP. 12x digital input 24x digital output with OC-PNP width - 72 mm power supply via bus
The I/O module UG 9460 has 8 digital 24V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.
The universal Input / Output module UG 9461 has analogue inputs and 2 analogue outputs. It can be used to connect thermocouples and thermistors and offers 2 configurable measuring inputs 0-10V or 0-20mA. Via Modbus the input status can ...
IOB1 – for timing measurement of larger circuit breakers The IOB1 offers six additional input and six additional output channels for CIBANO 500. What does it do? IOB1 is controlled by CIBANO 500 via EtherCAT®-communication. With ...
Binary input/output (I/O) terminal with IEC 61850 interface Easy to use binary I/O extension ISIO 200 is a simple and versatile binary I/O terminal with IEC 61850 interface. For communicating with CMC test sets and real-time message ...
Product Feature: Flexible protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 I/O ...
ODOT Automation
ODOT CN-8032 Profinet Network Adapter The CN-8032 Profinet network adapter supports standard Profinet IO Device Communication. The adapter supports MRP media redundancy, and it could realize ring network redundancy. And it supports ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules. Hardware Specification System ...
ODOT Automation
SmartMod+ expandable I/O supporting Modbus TCP/IP communication protocol. Modbus TCP/IP -Traditional slice type I/O -Connects to Ethernet via RJ45 to any XL-Series OCS or other OCS/RCS family controller -DIN rail mountable ...
Horner Automation
SmartBlock a remote I/O solution for any CAN equipped Horner OCS. -Analogue, Digital and Mixed input/output options -5-pin double CsCAN plug -Removable Field Wiring Terminals -Easy-to-read, separate I/O connectors ...
Horner Automation
SmartMod+ expandable I/O supporting CANopen communication protocol. -Traditional slice type I/O -The CANopen communication protocol allows direct interface with any X-Series OCS or other OCS/RCS family controller -DIN ...
Horner Automation
2 Universal analog input channels Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel 2 ...
Gantner Instruments
1 Analog input channel measuring half and full bridge, IEPE-sensor, voltage, current, quarter bridge with completion terminal 1 Analog output channel voltage (±10 V) or current (0 to 20 mA), 100 kHz update rate High-accuracy digitization 19-bit ...
Gantner Instruments
8 analog input channels thermocouple (type B / E / J / K / L / N / R / S / T / U), voltage (±80 mV) High-accuracy digitization 24-bit ADC, 100 Hz sample rate per channel, 50/60 Hz mains rejection Automatic linearization correction optimal ...
Gantner Instruments
The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance and an extensive dependability ...
Autonics
DeviceNet Analog Remote I/O (Terminal Block Type) The ARD-A series analog remote I/O units provide input/output expansion and communication for various devices using DeviceNet protocols. The ARD-A series provides high measurement accuracy ...
Autonics
Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic panels using standard Modbus RTU protocols. The sensor connector type ...
Autonics
Front-end intelligence with patented Click&Go control logic, up to 24 rules Active communication with MX-AOPC UA ServerSave time and wiring cost with peer-to-peer communicationSupports SNMPv1/v2c/v3Friendly configuration via web browserSimplify ...
Moxa Europe
Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency 5 kHz and settable forwards or ...
SENECA | Automation Interfaces
The ZC-16DI-8DO is an 16 CH input / 8 CH output mixed module. The inputs have 32-bit counters / 10 kHz max frequency, mosfet Outputs with shared negative pole. The communication protocols are CANopen or ModBUS RTU (protocol selectable ...
SENECA | Automation Interfaces
Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility to set the parameters via USB (Easy setup software) an registers ...
SENECA | Automation Interfaces
• Analogue Input Module • Encoder Input Module • Input Module • Digital Input Output Module • Strain gauge Input Module The Orbit Network can do more than just interface to Solartron digital displacement transducers (Digital ...
@ctiveIO I/O modules: smart intelligence for your system Our @ctiveIO I/O modules are as different as your individual automation solutions. Two sub-modules are combined in one module respectively in this smart system. You can thus ...
Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used anywhere where ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox fulfils the safety ...
(STW) Sensor-Technik Wiedemann GmbH
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW protocol ECeS and J1939. The ESX.3ios ...
(STW) Sensor-Technik Wiedemann GmbH
With the ESX.mbc, we present a new CAN-J1939 module especially for the agricultural and construction machine sector, to control electric motors and actuators in a performance range of up to 200 W. It provides four fast PWM half bridges ...
(STW) Sensor-Technik Wiedemann GmbH
The Fieldbus technology is suitable with Schlegel control units particularly for operations utilizing a big number of control units and pilot lights to be connected to the fieldbus with little wiring. The choice to network the Schlegel ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining