|
|
|
The DS-M1 uses an ultra light, specially-made metal outer covering, while the DS-M2 features a highly rigid double-decked structural design. The inner layer of both cases utilizes the DS-M1s ultra light outer covering, while the outer layer of each case is finished in a magnificent polished ebony coating with the added protection of reinforced fire retardant plastics. Apart from their sleek elegance and precision, the new cases also effectively dampen noise from radiating fans inside during operation. The layout of ports at the back of the frame has further been designed for user-friendliness, allowing even elementary DIY users to easily identify and plug in ports.
|
|
|
We offer an extensive range of products for industrial PCs to the ATX standard, from 482.6 mm (19") rack-mount versions in 1, 2 and 4 U, through to solutions for direct mounting on mounting plates.
|
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
The WMC-1004 is a full-length shoe-box wallmount industrial chassis for both SBC's (8-10 slot backplanes) and micro ATX motherboard. Its two-story modular design allows convenient installation of CPU boards and drivers while keeping the size of the chassis compact. Within its heavy-duty steel construction, it is equipped with two 5.25", one external 3.5" and one internal 3.5" drive bays for basic system requirements. To further enhance the unique design of the WMC-1004, (2) 9cm ball-bearing fans have been allocated especially for the CPU board to maintain the integrity of the higher speed processors. The WMC-1004 offers an ideal solution for computers in public areas or mobile computers where size is one of the main concerns.
Features:
Heavy duty steel construction shoebox industrial chassis can be mounted vertically or horizontally.
Two 5.25" and two 3.5" drive bays (one hidden).
Two 9 cm ball bearing fans with replaceable air-filter and one 8cm ball bearing fan.
Supports 8-10 slot backplane or micro-ATX
motherboard.
Supports PS/2 power supply
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
NEMO 300: UNDERGROUND CONTAINER FOR ACTIVE EQUIPMENT
PATENTED SYSTEM. Adequate to host active electronic and telecommunicatioN equipment. Strong construction. Cover according to UNE-124 D400. Installed equipment security guaranteed. IP-67. Easy access to the equipment from all the container. Heat evacuation through ground conducts.
|
|
MicroTCA is complementary to PICMG3.0 ATCA. Where AdvancedTCA is optimized for very high capacity and high performance applications, MicroTCA is designed to address cost sensitive and physically smaller applications with lower capacity, performance, and perhaps less stringent availability requirements. MicroTCA preserves many of the important philosophies of AdvancedTCA, including basic interconnect topologies and management structure.
|
|
The new dimension at the interface between man and machine for enhanced
- workspace
- safety
- ergonomics.
Industrial Workstations are more than just combinations of individual components. Individual customer requirements are achieved cost-effectively and to perfection.
Examples include compact solutions for scanner or laboratory workstations, individual worktops, combinations with the AP console system or Command Panel - there are virtually no limits to your creativity.
The concept is convincing because it is so simple: IW modules are equipped with climate control and electronic components, centralised security controlling, plus an extensive range of accessories, for a complete solution.
Perfect solutions from a single source. We develop and manufacture according to the principles of ergonomics and safety engineering.
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
- high-quality design
- aluminium circular extrusions
- colour specified by customer
- Symmetrical
- all pieces can be mounted on all sides (4 doors possible)
- all parts mounted on the aluminium extrusions can be installed
on the front and sides
- Installation advantages
- side panels can be plugged into place and locked with a
sash fastener
- sliding roof and floor pieces for cable entry with integrated
tension relief
- 19" mount, adjustable mounting depth (right and left)
- can be dismantled
- high stability
- 19" and metric system solutions
|
|
Vitaro 195
ZENITH 160
BERLIN 150
apra Line 140
Tamago 185
apraTek 180
19" enclosure system 179
|
|
PROLINE Voice and Data Cabinet
APPLICATION
This pre-assembled package meets all of the most common voice and data requirements and is available in two colors and five sizes.
Optional PROLINE components and DataCom accessories may be added to your original package or ordered separately.
FEATURES
Mounting channels (4) provide infinite front to back adjustment of rack angles
Rack angles are coated with black polyester powder paint
Front acrylic window door with key lock offers unobstructed visibility
Fully louvered rear door provides excellent ventilation, keeping equipment cool and extending its life
Quick release latches on side panels provide easy service access
Fan ready top with two cable entry ports for easy access and service
Open base for easy access and service
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
CONSTRUCTION
Fully welded heavy gauge steel frame
L-shaped rack angles (4) have tapped 10-32 holes with EIA 310-D spacing
Both front and rear doors have lockable handles
Mounting hardware (20 10-32 screws) is included
FINISH
Phosphatized steel coated with RAL 9005 black textured, low gloss polyester powder paint. Other finishes available - contact Hoffman Customer Service.
INDUSTRY STANDARDS
EIA 310-D
LOAD RATING
Static load rating 1500 lb (680.4 kg). For other load requirements, contact Hoffman.
|
|
NT Box 3-part Wall Cabinets - For optimal accessibility from 4 sides
High-grade steel housing (light grey RAL 7035) complete with basic
equipment.
-Hinged centre section, 500 mm, with a twoway ock
-Optimum accessibility for fast installation: once the door is open, the side
panels can be drawn forward
-Mounted ready for installation, glass door at front, inc. lock, central swivel
mounting frame,19 mounting angles at front, cable entry apertures in top
and bottom .
-Transportable packaging for single units
-Overall depth of 650 mm, from 6 - 18 adjustable
shelf height units.
The wall-mounted 3-part NT Box was specially
developed for small networks, sub-distributors
and fl oor distributors.
The major practical problem of accessibility is
solved by the fact that the door can be very
quickly removed once opened, allowing the side
panels of the centre section to be slid out forwards.
In addition, the entire centre of the box can
be swung out to one side.
This way, the housing is easily accessible from
all four sides and allows all components to be
installed easily.
To change the doors from left to right-hand
opening, simply lift out the hinge pin and replace
them in the fi xings provided.
|
|
Intel Server Chassis are designed and validated for easy, cost-effective integration with Intel Server Boards. A full line-up of pedestal and rack-optimized chassis are available to meet your customers' diverse needs.
Intel Server Chassis SR1500 is a performance 1U rack-mount chassis. Feature set supports the high-density server market
with: improved serviceability, accessory kits allowing
for configuration options and Intel Cable Reduction Technology that simplifies server infrastructure by eliminating cables to support up to three hot-swappable SAS (Serial Attach-SCSI) or SATA (Serial ATA) hard drives and one slim-line optical device.
The Intel Server Chassis SR2500 features integrated manageability with upgrade options including flexible drive configurations - up to 6 SAS or SATA HDDs or 5 drives plus tape and SAS RAID options which increases data protection and HDD I/O performance. Intel Server Chassis SR2500 is designed for increased uptime and tool free serviceability.
The Intel Server Chassis SC5400 offers an ideal solution for a variety of business environments. With great reliability, wide-ranging scalability, strong manageability, the SC5400 is a solid, cost-effective solution for a range of environments, from small businesses to database servers. The SC5400 chassis family supports SAS, SATA and SCSI drives for configuration and application flexibility. Applications needing maximum reliability, serviceability and uptime can benefit from the SC5400LXI SKU, which integrates fully redundant hot-swap power supplies and fans, and support for 6-drive hot-swap SAS/SATA drives.
|
|
Are you looking for a file cabinet that offers greater flexibility? Are you thinking of a lateral file cabinet for extra storage space? What would you say about a file cabinet that offers even more? The multi-purpose cabinet is your solution.
Montel offers a complete range of storage and file cabinets for all types of material. The cabinets include accessories making various configurations possible, sure to satisfy your most particular needs.
The cabinet may be purchased with a lock providing a secure storage solution for your personal items or confidential documents (client files, patient records, accounting statements, etc.).
Ideal for office, institutional and industrial applications, Montels multi-purpose cabinets are indeed multi-purpose and practical.
|
|
The handling and conservation of rolls of textiles require flexible, large capacity storage systems.
The cantilever shelving system from Montel is designed to store various lengths of rolls, maximize the use of available space and facilitate handling.
Montel can also provide cabinets that recreate the microclimate needed for storing fragile items and valuable collections (ventilation slots, trays and windows on the doors).
|
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Geotest's offers a large selection of PC, 3U and 6U PXI instrumentation chassis allowing test engineers to design system configurations specifically for automatic test equipment (ATE) systems, data acquisition, process control applications, and other industrial applications that require PC-based and PXI-based instrumentation.
|
|
- dismountable aluminium cabinet frame
- passively ventilated viewing doors (side
perforations) with turning lever lock
- rear door with fitted perforated panel
(48% perforation) with turning lever lock
- two asymmetrically split side walls with
sash fastener locking mechanism
- two 19" levels depth adjustable assembly
options for the integrated
19" parts (see top view cabinet frame
page 2.3 "Technical information")
- 3-part bottom plate- closed
- closed top plate
- base with tilt prevention D=1150 mm
- earthing set 2.5 mm2, mounted
- 19" screw set M5, 50 pcs
Delivery:
fully assembled, base included
(with H=2000 mm)
|
|
|
A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front.
|
|
1U Industrial Rackmount
Model PRS-1174
19" 1U Height rack-mount micro-ATX based server with four drives
2U Industrial Rackmount
Model PRC-2193
19" 2U industrial rack-mount chassis for M/B version
3U Industrial Rackmount
Model AREMO-3194E
19'' 3U rack-mount chassis for ATX M/B platform(adopt PS/2 Power supply)
4U Industrial Rackmount
Model AREMO-4196
The Best Cost-Performance 19" 4U Height Pentium 4 Processor Based Rack-mount Computer
5U Industrial Rackmount
Model IRC-750
19" 5U rack-mount CTI chassis with 6 drive bays
6U Industrial Rackmount
Model IRC-860
19" 6U rack-mount CTI chassis
Industrial Node Chassis
Model AREMO-6163
6-slot full-sized industrial node chassis (Shoe-box)
|
|
Highlights
1Gb PICMG 2.16 platforms
Easier integration - bring solutions to market faster
Comprehensive shelf management throughout platforms
Flexibility and scalability, maximizing reuse
Targeted at high availability and standard applications
Wide range of interoperable blade functionality
- Single Board Computers
- I/O & Communication
- Media & Voice Processing
- Storage
- Embedded SS7 & SS7/IP
- Carrier Blades
|
|
one cabling solution for your equipment
- Ten sizes of cable ducting plus associated accessories.
- Optimal ducting sizes for maximum cabling capacity.
- Simplified installation:
- snap-off tongues for cable entry,
- 4 types of fixing accessories to suit the application: screw, clip-in, door mounting and chassis mounting.
- Important: no metal component parts enter the inside of the trunking, thus maintaining electrical insulation.
|
|
PCI enclosures
Internal and end enclosures with knock outs
Plastic enclosure system withIngress protection IP 66
Version with coloured cover
Classified product range with 13 enclosure variants from 65 x 65 x 57 mm to 254 x 355 x 111 mm
Easy to modify
Extensive range of accessories from installation plates to insulating stoppers
|
|
|
The IMnet 310 wall mounted cabling enclosure complements the large IMnet rack in providing total all-around cable access, as well as flexibility in panel mounting widths, and easy baying for an infinitely expandable installation...
|
|
|
Cabling cabinets are expected to accommodate an ever-increasing number of network connections. The fundamental purpose of a network cabling enclosure is to control and protect a large volume of data cables and patch cords. IMnets unique design maximizes the open area available to bring in cables, especially in the two areas most used for cable entry -at the rear and at the sides of the enclosure (top or bottom). Even in its 600mm wide variant, IMnet has offset front cabling channels that allow patch cords to be managed down the side of the patch panels, leaving all active equipment free from dangling patch cords. The front cable channels in both the 600mm and 800mm wide cabinets have cable paths guiding cables from the front to the rear of the enclosure. Cable access windows have the option of radius window mouldings that provide smooth cable paths to protect data cables. The IMnet cabling enclosure provides network managers and installers with unparalleled cable access. The IMnet frame also ensures the cables flow over a smooth surface which cannot damage the data cables. In applications of extremely high cable density, the racks can be bayed together with a 100mm cabling gap, an enclosed cabling area providing cable access space while still protecting and hiding cables from view. IMnet is a multi-practice 19 and/or ETSI enclosure, designed to support and enhance the installation of the physical layer within networking installations. IMnets combination of lightweight, excellent cable access and management, plus fast-fitting accessories, has set a new standard for datacom enclosures. IMnet II adds to the qualities of the original design with improved robustness, rigidity and locking systems...
|
|
|
... see all the products in | |
