|
|
7200 Capacitance Meter
The Model 7200 offers fast and accurate characterization of active and passive components at 1 MHz. The <50 µs risetime of the analog outputs makes this unit ideal for DLTS measurements.
• Ultra stable and repeatable measurements
• Programmable, internal 100 VDC bias
• 0.01 picofarad resolution
• High-speed, high-resolution analog outputs
• Selectable test levels
• Calibration stored in nonvolatile memory
• GPIB and HPGL
|
|
|
Agilent LCR and resistance meters are useful in testing components and materials in a variety of research and design applications and in component manufacturing. LCR meters measure impedance (inductance, capacitance, and resistance) at spot frequencies. Resistance meters are optimized for high-resistance or low-resistance measurements.
|
|
|
The B&K Precision Model 889B Synthesized In-Circuit LCR/ESR Meter with Component Tester is a high accuracy test instrument used for measuring inductors, capacitors and resistors with a basic accuracy of 0.1%. Also, with the built-in functions of DC/AC Voltage measurements and Diode/Audible Continuity checks, the Model 889B can not only help engineers and students to understand the characteristic of electronics components but also being an essential tool on any service bench.
|
|
Measuring Instrument - LCR Precision Instruments ( LCR200) :
Key Features:
- Measurement Parameters : Z , Ls , Lp , Cs , Cp ,
DCR , ESR , D , Q , and (Theta)
- Test conditions : 100MHz , 120Hz , 1KHz , 10KHz , 100KHz , 200KHz ; 1Vrms , 250mVrms , 50mVrms , 1Vdc(DCR only)
- DMM Functionalities
- Dual LCD Display with LED backlit
- Open / Short calibration
- Remote binning capability
- Auto range / range hold selection
|
|
|
|
|
|
Product ID: LCR-612
20000 Counts Hand Held LCR Meter Dual Display Auto-Ranging ( LCR-612 )
20000 Counts LCR Meter
Dual Display Auto-Ranging
MODEL: LCR-612
Outstanding Features:
1.Basic accuracy:
0.5% for Resistance
0.7% for Inductance, Capacitance
2.Dual Displays provide quick tested results readouts, with L.C.R. Display values up to 19999 counts and Q.D.R. display values up to 9999 counts
3.Excellent resolutions:
Resistance up to 0.001Ù
Inductance Capacitance up to 0.1uH/0.1pF
4.Provided up to 4 testing parameters:
Ls+(Q,D,Rs), Lp+(Q,D,Rp)
Cs+(Q,D,Rs), Cp+(Q,D,Rp)
5. Auto-Power Off function:
To conserve battery life for longer use.
6.Fuse detection function:
To inform that the fuse is open or damaged.
7.External DC Adapter functions:
Use of a DC adapter can also serve to disable Auto Power Off function.
Dual Display LCR Meter LCR-612 Test Ranges: 120Hz and 1KH
LCR-612 SPECIFICATIONS
LCR-612 Display:
LCR—4 1/2 digits, maximum reading of 19999.
QDR—4 digits, maximum reading of 9999. (Auto range).
Parameter Measurement:
Ls+(Q,D,Rs), Lp+(Q,D,Rp)
Cs+(Q,D,Rs), Cp+(Q,D,Rp)
Overload: "OL" is display.
Test Frequency: 1KHz and 120Hz.
Range Mode: Auto and Manual.
Auto Power Off:
The meter key switch inactive for more than 5 minutes, press power key to resume operation.
Measurement rate: Approx. 1 time per second, nominal.
Power Requirement: (1). Single standard 9-volt battery.
(NEDA 1604, IEC 6F22 006P) ;(2). External DC Adapter 12Vmim to 15Vmax / 50mA.(optional)
Overload Protection: 0.1A/250V fast below fuse.
Dimensions:192mm(H) x 91mm(W) x 52.5mm(D).
Weight: 365g. (including accessories)
|
|
|
The LCR Meter measure passive components with as little as 0.05 % error. These easy-to-use instruments are quick to setup, adjust and calibrate. The SR715 and SR720 are ideal for applications such as incoming inspection, quality control, automated test, and general benchtop use.
|
|
High-speed LCR meter with up to 120MHz sampling
High Speed Testing of Chip Inductors and Magnetic Heads in Research and Development
Broad Frequency Measurement Range ( 100 kHz to 120 MHz )
High speed LCR testing (6ms/sample)
14 Parameter Types ( |Z|, |Y|, Θ, Rp, Rs(ESR), G, X, B, Lp, Ls, Cp, Cs, D (tan δ) and Q )
Detachable Head Amp
Load Compensation Function
BIN ( Classification ) Measurement
|
|
1. 320x240 dot-matrix display
2. Test frequency range : 20Hz - 1 MHz
3. Measurement parameter |Z|, Rs, Rp,Xs, Rdc|, |Y|, Gp,
Bp, Ls, Lp, Cs, Cp, D, Q , Theta
4. Basic Accuracy ± 0.1%
5. Measurement Time : 30 mS ( Fast )
6. Bin Function : 8 bins (expandable to 15 bins)
7. Comparator function: Primary / Secondary
8. Memory : 256 instrument setups
9. External Memory interface (Option)
10. Interface : Handler,( Option : GPIB, RS232 ,Printer )
11. Deviation Zero : Open / Short
12. DC Bias (Option)
|
|
- LCD Display 128 x 64
- File Management ( Flash Memory Card)
- Test Point Range : 64-2048
- Test Voltage : 50-1500VDC (RT-9651 H / CH )
- Insulation Test : 500K-1000MOhm(RT- 9651H/ CH)
- 4-Wire Rsistance Test : Yes
- Components Test : Resistor,Diode,Capacitor(Option)
- Resistor Measurement : 0.1Ohm-20MOhm
- Capacitor Measurement : 100pF-1000uF
- High Quality Relay
|
|
| ... products without technical information |
| |
Biochrom WPA CO8000 Biowave Personal Cell Density Meter
Rapid, low cost cell density measurement, anytime, anywhere
- Simple
- Reliable
- Portable
The CO 8000 is an easy-to-use instrument to measure the density of cells in suspension (i.e. yeast cells and bacterial cultures) by measuring Absorbance(OD) at 600nm.
Completely portable, this hand-held instrument has a rechargeable battery so it can be used in incubation cabinets, under anaerobic conditions, or in fume hoods and safety cabinets.
- LED Light Source for stable results and no maintenance.
- No warm up time.
- Saves last 99 results for download to PC or Printer.
- Accepts 10mm cuvettes, or 16mm tubes (Ehlenmeyer side-arm flasks).
- Adapters available for 10mm and 12mm tubes.
- Optional printer
- Easy to clean.
The CO8000 gives a lifetime of stable and repeatable results for a very affordable price!
|
|
|
|
|
|
WTW has developed a new line of field instruments based on optical measurement offering the following capabilities:
• pHotoFlex: photometry, pH
• pHotoFlex Turb: photometry, pH, turbidity
• Turb 430 IR and Turb 430 T: turbidity
The instruments have been designed to extract the optimum performance from the latest generation optics optics with state-of-the-art LED technology.
Remarkable features include:
• Low power consumption
• Robust
• Display-driven user interface
• Waterproof
• Integrated smart cuvette adapter for 16 and 28 mm cuvettes
• Hand held
The exceptional versatility of the pHotoFlex, pHotoFlex Turb and Turb 430 makes them ideal for use in process control, water analysis, and the beverage industry.
Both pHotoFlex and pHotoFlex Turb are equipped with a pH function, measuring the full pH range from –2.00 to 16.00. The pH measurement is simplicity itself, offering automatic temperature compensation and auto buffer recognition.
For turbidity measurement the Turb 430 IR offers a large range from 0-1100 NT/FNU. Outstanding features include: Automatic 3-point calibration, GLP compliant data export via RS 232, calibration record and the setting of a calibration interval.
|
|
|
The user can designate up to 4 choices of wavelength at 350nm-1100nm of visible rays, thus it is being used in various fields such as chemistry, environment(water quality, air, soil), food, bioassay for residual pesticides, etc. In case of bioassay for residual pesticides to measure the inhibition level of residual pesticides or water analysis to measure the COO, TN, and TP levels of water, faster and more convenient measurement is possible with commercial test reagent
|
|
POCKET Colorimeter II
More than 30 flexible, single parameter instruments
- Easy operation
- Small enough for almost any pocket
- Reliable results without a mains connection
- Rugged construction yet lightweight
DR 800 series—compact colorimeters
The DR 800 models are preprogrammed for different numbersof tests:
– DR 820: 20 tests
– DR 850: 50 tests
– DR 890: 90 tests
All three DR 800s work best in combination with the practical HACH tests for reliable, fast results in wastewater, drinking water and process water analysis.
|
|
Features:
1. The 2.4" width colorful screen and portable design
2. Three kinds of light sources for selection,SCI and SCE mode switch and metamerism analysis for different working status
3. Tolerance setting, humanizational auto-judge color difference values and color deviation for judging the color easily
4. Professional color analysis software for doing the color data analysis and color difference diagrammatic outputting
5. The optical mini printer fulfil the output of data
|
|
The system CIELAB Color Checker PR0086 is an on-line color-measuring system, adjusted to an high absolute color accuracy.
A color adjustment by means of an absolute calibrated reference spectrometer is carried out in factory.
The absolute accuracy in average is ~1.6 dE. The relative accuracy also between the systems is less than +/-0.5 dE.
|
|
|
|
|
|
More powerful and more versatile than ever from the famous Chroma-Meter series
The new Chroma-Meter CR-400 supersedes the internationally recognised and acclaimed series CR-100, CR-200 and CR-300. It offers a huge number of added value features and improved versatility, while fully maintaining all optical properties and therefore, guaranties full data compatibility with the previous series. The CR-400, with its 8mm measuring area is suitable for measuring reflected colour and colour difference in a wide range of industrial fields. It is able to meet the needs of various applications, from all sorts of ingredients, foods, raw materials and finished products to pharmaceuticals and dermatological applications - the CR-400 handles all!
The main improvements focus on enhanced usability and functionality such as the re-designed Data Processor, featuring a large back light display for numerical or graphic display of measurement data and a built in thermal high speed printer. The data memory can now store up to 100 target colours and 1000 measurements. Several new colour spaces and Pass/Fail formulas as well as indices for whiteness and yellowness enhance the usage into various fields of applications. The new "user indices" function allows the input of up to six different user or application specific equations using XYZ, Yxy or CIELAB values. Furthermore, the communication languages can be set for English, German, French, Italian, Spanish and Japanese.
|
|
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
KLG/KLH MultiClean
Welded enclosure, oil-proof, with large maintenance doors. Models available with one stage (KLG model), and up to four stages, with filter-element clamp for the main filter (KLH model). The filter levels are configured vertically (one above the other).
Special features:
- Models available for up to 0.5 bar overpressure or sub-atmospheric pressure
- Use as last-chance filter with a Pred of 1 bar
- MultiCase filter mounting system can be used
- Can be washed out
- Grid dimensions: 610 / 610
- Equipment installed can be later changed (retrofitted)
- Surface is powder-coat finished; stainless steel also possible
- Snap-on, permanently elastic door gaskets
- Fittings for draining liquids
Application:
Oil and emulsion-mist extraction; dust extraction of medium-level concentrations (e.g., in pharmaceutical and chemical industries; with last-chance filter behind the dust filter, etc.)
|
|
Series RVE 400 – 3200
Type of construction vertical, single-stage
Volume flow rate of waste air 500 – 50’000 m3 / h
Ø of columns 400 – 3200 mm
Heights 2500 – 9000 mm
Volume flow rate of washing medium 2 – 110 m3 / h
|
|
| ... products without technical information |
| |
Company COMPAUT offers a broad range of rules and meters of quality.
The majority of this whole of visualization can be delivered in 24:00
Among these rules, many models are perfectly compatible, as well mechanically as electrically, with the principal standards of the market.
You can thus come to replace those which you usually use, without same having to change the connectors, the whole for a price without comparison.
In addition, company COMPAUT points out that it carries out in its workshops the repair of the meters and the rules, some is the mark, and this within very short times.
N’ thus do not hesitate to entrust to us your defective products for a free estimate.
|
|
|
|