|
|
The diesel fuel pump for construction machinery is maintenance-free and robust, operating extremely reliably at temperatures to -20° C. The pump is available either with 12 V DC or 24 V DC motors.
|
|
|
Small capacity, horizontally mounted, dry pit, non-clog pump for handling wastewater and other liquids with soft solids
|
|
APPLICATIONS
* FOR DOMESTIC SYSTEMS AND SMALL IRRIGATION SYSTEM
PRESSURISATION.
* HANDLING OF NON AGGRESSIVE CIVIL AND INDUSTRIAL LIQUIDS.
* FOR WASHING SYSTEMS AND FOR INSERTION INTO COMPLEX
INDUSTRIAL MACHINERY AND LINES.
* FOR ANY APPLICATION REQUIRING A SELF PRIMING SYSTEM.
DESIGN ENGINEERING
* SEALED MOTOR WITH EXTERNAL VENTILATION AND FINNED ALUMINIUM
ALLOY CASING
* IP 44 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX PUMP LIQUID TEMPERATURE: 50°
|
|
|
Selfpriming monoblock water pumps with open impeller. The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean or slightly dirty water and in flood irrigation systems.
|
|
Features:
* Self priming to 7 1/2 vertical feet (2.3m)
* Maximum head of 23 feet (10 PSI) (.7 bar)
* Liquid temps from 40ºF (5ºC) to 185ºF (85ºC)
* Thermal overload protection
* Stainless steel shaft
* BUNA-N impeller and lip seal
* Built-in reverse switch and 8 foot cable with battery clips (3000-350 only)
A variety of uses for these pumps has been made possible by the use of a Buna impeller for applications in pumping water to changing oil in cars, trucks, farm equipment and machinery. Pumps incorporate thermal overload protection. The premium model includes a built-in 3 position switch to simplify flow reversal. Dual ports, 3/4" male garden hose and 3/8" NPT (F).
|
|
* Doubled walled stator design eliminates need for a universal joints or coupling rod.
* Available in Cost effective, portable-closed coupled (Motorised) design or Bare shaft design for flexibility of use of drives e.g. Mechanical speed variators, Diesel engine etc.
* Can be adopted for solar power motors.
* Suitable for metering, dosing with 90 to 95 % accuracy.
* Ideal Pump for the European Market, especially U.K.
Fluids Handled / Applications
Domestic – Cellar Drainage, Septic tank cess pit emptying, Garden sprinkler systems irrigation, Water supply sampling from wells, streams and rivers.
Industrial – General purpose pump for Diesel, Lubricating Oil, Water Based Inks, Vegetable Oils, Plating Solutions, Other Non-Aggressive Chemicals. . Non corrosive liquids with medium viscosity e.g. Fuel oil , Thin Molasses, Fluids with suspended solids e.g. Dirty water from cesspools, Domestic water transfer, Hot water circulation.
|
|
The BOZP model self priming pump is used to pump liquid whose level is below the inlet of the pump and deliver the fluid matters containing gas. Its pump shell , cover and vane are made of high-grade stainless steel 304 or 316L; the motor is equipped with stainless steel shield, the inner surface adopts mirror polishing, coarseness Ra: 0.28um, outer casing adopts wiredrawing treatment, completely according to GMP standard .
Application
Mainly used to deliver the liquid containing of gas in fields such as pharmaceutical, alcohol, food, chemicals, beverages etc. and also used as a return pump in on-the u2013 spot CIP cleaning system, and used for liquid delivery that need high pressure filter.
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting pressure/vacuum generators compressors with low maintenance and running costs. These pressure/vacuum generators operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filter and control valve, these pressure/vacuum generators can be fitted with other accessories without a problem. The blast air cooler, which is also integrated, guarantees a very low blast air temperature. The compact cover ensures low noise and heat emission. The combined pressure/vacuum generators are additionally equipped with a second intake. This provides the capability of making minor adjustments to the suction and pressure side as well as to high blast air volumes. By way of option, the second intake can also be used as a second low-vacuum suction air supply. Optional corrosion protection also makes these vacuum pumps suitable for extracting moist air.
|
|
Available in oilless or lubricated, motor-mounted or separate drive, Gast rotary vane compressors and vacuum pumps offer a wide choice of capabilities.
• Oilless or lubricated styles will accommodate a wide variety of pneumatic applications
• Self-lubricating, self-adjusting vanes on oilless models provide like-new efficiency throughout the service life of the pump
• Motor mounted or separate drive versions allow versatility in selecting the right pump for your application
• Miniature through larger size models offer an extensive performance range to satisfy most any need
|
|
VANTAGE
DC fuel transfer pumps
The all new DC pump for plant equipment featuring new innovations in design and compact in size, incorporating a new level of pump intelligence allowing the pump to monitor its own activity and performance.
Studies have shown that, in the majority of cases, fuel-transfer pumps break down because of improper handling by users, including excessive or extreme use, accidental start-ups, or simple carelessness, that can leave the pump running for hours on end. Breakdowns translate into loss of time and money while waiting for the pump to be repaired. These difficulties are overcome with VANTAGE. Thanks to new, internationally patented technology, VANTAGE automatically prevents situations from becoming critical.
|
|
Dry running and self-lubricating rotary vane pump. Low vibration, nearly pulsation free, compact and in some cases reversible. Mainly used as a vacuum pump.
Free flow: 200 l/min max.
Pressure: 1.4 bar max.
Vacuum: -930 mbar rel.
|
|
Dry running and self-lubricating rotary vane pump. Low vibration, nearly pulsation free, compact and in some cases reversible. Mainly used as a vacuum pump.
Free flow: 200 l/min max.
Pressure: 1.4 bar max.
Vacuum: -930 mbar rel.
|
|
VACUUM PUMPS with rotary pallets, load factor of 100%, with lubrication forced by oil injection in closed circuit.
Standard equipment: Radiator of oversize cooling, direct drive by engine IP 55 and elastic joining, non-return valve with the aspiration, ballast of air, filters separating aerosol of high effectiveness.
- Flow: 5 to 1000 m3/h,
- Max. Vacuum: 0,5 mbar ABS,
- Engine: 0,13 kw to 22 kw.
|
|
The S 1.5 is a single-stage, oil-sealed rotary vane pump with a gas ballast valve. It is driven by a flange mounted AC motor. The shaft of the pump and the shaft of the motor are linked by means of a pinned coupling.
Advantages to the User
Very small and light-weight
Low ultimate pressure
High water vapor tolerance
Low noise operation
Simple to connect
Easy to maintain and use
Typical Applications
In all areas of vacuum engineering where a low intake pressure is required
Evacuation of refrigerant circuits
For suction, lifting, emptying, filling and tensioning
For installation in mobile instruments
Supplied Equipment
DN 16 small flange connection on the intake side
Centering ring and clamping ring
Exhaust port designed as a DN 6 hose nozzle
Carrying handle
Built-in ON/OFF switch and overcurrent circuit breaker
Oil filling
|
|
|
|
|
|
The proper use for rotary vane pumps XS is in the 1 mbar to 10-3 mbar range. VACUUBRAND oil sealed rotary vane vacuum pumps are high performance, direct drive vacuum pumps of one stage (RE) or two stage type (RZ). With small dimensions and various direct mounted accessories such as separators, full-flow oil filters with maintenance indicator and oil mist filters they are all-rounders in fine vacuum generation. Especially for applications in chemistry laboratories, they offer a high vapour capacity for water and solvents and an active corrosion protection through an oil shut-off circuit, keeping the module under vacuum and stopping corrosives from entering the pump during non-operation.
high conductance inlet
high pumping speed even at low vacuum
high vapour tolerance
for water and solvents through gas ballast about to 10% of pumping capacity. Quieter running and good ultimate vacuum even with gas ballast.
anti-corrosion design
important inner surfaces mechanically ground and plasma treated. Oil shut-off device against corrosive gases entering the pump whilst switched off.
new lubrication circuit and large oil volume
for quiet operation and longer service intervals
compact design
smaller dimensions, low weight, ease of maintenance through telescopic design
|
|
- combination of a diaphragm pump with a rotary vane pump
- for the fine-vacuum range in special applications, e.g. for aggressive gases and vapours, for evacuation of solvent recovery vapours, for pumping of vapours which are soluble in oil
- example of use: freeze drying
|
|
The G2000 is a fixed flow, heavy duty, transfer pump. It is available in a variety of materials to suit various fluid types.
Capacity up to 500 M3/hr 2200 USGPM
Pressure up to 40 Bar 580 Psi
Viscosity up to 1,000,000 cSt 4,630,000 ssu
Temperature -40 to +300 C 570° F
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
The EP4 pump is an ideal prelube oil pump for large engines, but it is also a great oil or fuel transfer pump for limited duty cycle applications. It performs well with high viscosity oils. As a positive displacement pump it will self prime but is more efficient and quieter than a gear pump. Anywhere you need to move oil or fuel around you can do it easily and safely with a reliable EP4 pump.
The EP4-24 is powered by a self-contained motor running on 24 Volt DC power. The EP4-12 is the same unit running on 12 Volt DC power. Both voltages are capable of pressures in excess of 60 psi, with a pressure gauge built right into the face to show it. These pumps also incorporate a self-contained low loss check valve to prevent backflow. They are quiet due to their "whisper vane" pump technology, and if they do make noise it's due to a starved suction pipe that is too small. They are so quiet that you can hear the normal rattling sound of cavitation in an inlet starved pump
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
|
|
|
|
Features:
• Complete assembly of motor and pump that won’t leak
• Requires no scheduled maintenance
• Prewired 208/230 3-phase motor (460VAC available from factory)
• Flow up to 2000 liters/hr (9 gpm)
• Pressure up to 4 bar (60psi) rise
• Continuous duty
• Preloaded rolling contact bearings
• Internally cooled and cannot overheat, when there is some external flow
• Reversible – Switch any two lead wires
• Can deliver oil of almost any viscosity
Applications:
• Draining and filling engine sumps and reservoirs
• Prelubing diesel engines for long life between costly overhauls
• Transferring oil – back and forth and at different elevations
• Finishing and polishing of stored diesel fuel and other oil
• Ink jet carpet printing
• Filling and bottling plants and production lines
• Silent oil cooling of X-ray equipment in hospitals
• Pumping hydraulic oil through heat exchangers for cooling
• Pumping through filters for cleaning
Description
The Daisy oil pump is a completely sealed, positive displacement motor/pump unit for pumping non-corrosive fluids. It is reversible and has no shaft seal. It will deliver up to 2000 liters/hr (9 gpm) 24/7. Pressure rise through the pump is internally limited to approx. 4 Bar (60 psi) over a wide range of viscosities.
The Daisy is a floating-vane type pump produced in two configurations. Both are reversible but P/N 6460 has a built-in rotary reversing switch which is useful for bi-directional applications.
The Daisy uses a unique tripod mount based on the standard NEMA bracket hole locations. The Daisy can be mounted in any orientation, horizontal or vertical, except inverted.
|
|
Features and Specifications:
-Built in pressure bypass valve to protect the motor under adverse conditions
-15 GPM flow rates against pressures set by bypass valve
-Integrated reverse flow prevention check valve so that the engine oil pressure can not motor the pump backwards
-Whisper-Vane positive displacement vane technology
-Low maintenance direct shaft coupling
-Easy reorientation of intake and exhaust ports
-Suction hose size: 1.25" max
-Discharge hose size: 1.00" max
-Designed for large diesel engine applications
|
|
Overview
- High Pressure; Low noise; highly efficient
- Single, double, triple, and thru-drive pumps
- Industrial and Mobile pumps
- Design allows for cold start-ups
- Speeds to 3000 RPM
- MPS's for Different Displacements are available
|
|
The P2000 rotary pump is specifically designed for space constrained installations, or where a simpler belt-driven design is preferred. The P2000 rotary pump is available in two different designs :
Inboard roller bearing configuration with single mechanical sealing for duties involving lubricating liquids, such as Fuel Oils, Vegetable Oils, Lube Oils, and Additives.
Inboard plain bearing configuration with gland packing for duties involving non-lubricating liquids, such as Molasses, Resins, and Polymers.
|
|
|
|
|
|
Viking Pump presents its innovative LVP Series stainless steel Vane Pump. With 14 Bar (200 PSI) thin liquid capability, and capacities up to 36 M3/Hr (160 GPM), the new LVP pumps are designed for corrosive, thin liquids at higher pressures than other positive displacement pumps. Exceptional performance, advanced durability, application flexibility, ease of installation, and ease of maintenance helps users realize enhanced productivity, and a lower total cost of ownership.
The LVP Series is a true, industrial-duty product with exceptional performance for corrosive, low viscosity liquids. Designed to minimize life-cycle costs, its 62 Rockwell C surface-hardened stainless steel casing reduces casing and vane wear. Its standard chrome oxide coated shaft and silicon carbide bushings are extremely hard and long lasting. Its PEEK® vanes offer high strength, low friction for less wear, and broad chemical compatibility. Its maintenance-friendly design allows complete draining and easy vane or seal replacement without removing the pump from its system.
The LVP series is available in a metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, or with ANSI flange ports, NEMA motor mount, and inch-standard seals, and can be foot mounted.
|
|
JABSCO Hy∼Line Rotary Lobe pumps are robust, durable machines designed for long life in demanding applications. Modular construction, using interchangeable parts, enables pumps with a wide range of seal, port and rotor configurations to be built and motorised on short lead times.
Features::
• Flow rates up to 108m³/hr (30 litres/second)
• Pressures up to Up to 15bar (220 psi)
• Temperature range: -40ºC to +140ºC
• Liquid viscosity range: 1 to 1,000,000 centipoise
• Hygienic - approved to American 3A standard
• Gentle pumping action suits viscous, delicate and particle-laden liquids
• Easy to clean, easy to maintain
• AISI316 stainless steel construction
|
|
Flow rate: 7.9 USgallons/min (29.9 Litres/min)
Self-priming from dry up to 1m (3ft)
Features:
• Meets USCG 183.410 & ISO8846 Marine (Ignition Protection)
Specifications:
Body Bronze
Rotor Vectra
Vanes Ryton
Seal Nitrile Lip Seal
Shaft Stainless steel
Port Type 1/2" NPT Female or 1" (25mm) Hose barb
Voltage 12 Vdc
Amp Draw 8 amp
Fuse Size 15 amp
Motor Intermittant duty permanent magnet type with reversing switch
Duty Cycle 30 minutes at 10ft (3m) at 86°F (30°C)
Weight 5 1/2 lb 2.5 kg
|
|
Rotary vane vacuum pumps, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
Rotary vane pumps, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
|
|
Advantages:
- high water vapour tolerance
- high reliability
- low weight
- small dimensions
- quiet running
- high pumping speed
- optimal ultimate pressure
- easy to service
- low maintenance
Ranges of application:
- ideally suited for use in the laboratory
- freeze drying
- process engineering
- backing pump for turbomolecular pumps, root pumps, etc.
|
|
DRY
Tough, compact construction
Minimum maintenance
Excellent heat dissipation
Capacity from 2 to 25 m3/h
Maximum vacuum level 700 mmHg (92% vacuum)
DRIP-FEED LUBRICATION
Minimum oil dispersion
Low noise and vibration free
Capacity from 2 to 150 m3/h
Maximum vacuum level 720 mmHg (95% vacuum)
Available with total loss lubrication, for all applications in which the intake air contains a high percentage of harmful liquids or gasses
OIL BATH LUBRICATION
Oil bath lubrication combined with a new design release reservoir that ensures silent operation and the complete removal of oil spray
Capacity from 20 to 300 m3/h
Maximum vacuum level 759 mmHg (99% vacuum)
|
|
|
|
