|
|
Incremental Encoder Shaft version
MICRONOR incremental encoders are used in all imaginable industrial processes for recording actual values. We have a large selection of shaft encoders and interfaces available. In order to simplify the selection process for you, we have compiled the following list.
ESI indicates the shaft version, and size, e.g. 18, 38, 58, represents the housing diameter.
|
|
|
Incremental encoders for relative positioning applications.
|
|
MIG – Incremental magnetic pulse generator
STRÖTER has developed an „intelligent“ intermediate flange which considerably simplifies the measurement of speed and sense of rotation as well as the connection with coordinating
control systems. What was previously only possible with time-consuming assembly and addons to drive systems is now possible in an easy and economical way both in new and existing installations.
This MIG magnetic incremental rotary transmitter is designed as an intermediate flange which is simply installed between the motor and the machine flange. This makes the integration of incremental position encoders in drive systems much easier – no matter whether you use it for speed measurement, for positioning control, dosage control or for synchronisation control.
|
|
Our manufacturing facility is uniquely equipped to produce small quantities of a wide range of products. The result: high performance, low cost encoders. Small economical shaft encoder series. Suitable application uses include; Industrial machines, elevetors, robots, plotters, cutting machines, injection moulding machines,machines tools, measuring instruments, rotary x-y table, NC machine and other position or angle measurement.
- 4 - 8 - 12 .... 512 ( increases four each until 512 Pulse) and 1024 , 2048 4096 pulse
- Magnetic Measurement System
- PUSH PULL or TTL RS 422 Line Driver Output
- Signal out types AB , ABZ , AB /A /B , ABZ /A /B /Z
- ** NPN + PNP
- Input Voltage 10...30VDC or 5VDC
- Housing Diameter 50 mm ( optional 40 mm )
- Shaft Diameter 8 mm ( optional 6 or 10 mm )
- IP54 Protection Class
- Frequency response max.100 KHZ
|
|
- The DIGISINETM is the 58mm reference encoder of the european market.
- The 40mm COMPACTISTM range has been developped to answer your expectation in tearms of compactness.
- Shocks, vibrations, high temperature, aggressive environment, sealing..., particular studies have been made to developp the 90mm ROBUSTECHTM in a way that they answer to severe renowned applications.
- The 200mm MAXXTM encoder is the perfect mechanic for speed and positionning measure in heavy duty applications (glass mill, steel mill, locks...).
|
|
general data sensing method optical
pulse tolerance 10 % ( 5000 pulses)
resolution (steps/turn) 10 ... 5000
electrical data interface square wave signal
allowable el. rot. speed depending on pulse range
switching frequency fmax. 300 kHz
mechanical data shaft type shaft
shaft diameter 10 mm
housing diameter 55 mm
flange clamping
mounting depth 36,5 ... 46 mm
housing/flange material steel / aluminum
mech. rotational speed < 12000 rev/min
ambient conditions protection classes shaft IP 42
IP 65
protection class housing IP 65
|
|
Type 15.22
- 10-30 VDC
- max. 500 pulses/revolution
- max. 10 KHz (more on request)
- steel shaft 6mm (on request stainless)
- Double ball bearing
- IP54 (IP64 as option)
- Weight 0.5 Kg
- Dimensions 75 x70 mm
- Massive zinc die cast
|
|
The flexible encoder for every task
Simple zero pulse teach-in at the press of a button on the device
Any line number between 1 and 8,192 and zero pulse width individually programmable
Ideal solution for end-users, resellers, engineering offices and system integrators
Maximum reliability
Modular design for highly varied individual solutions
Plug or cable exit
|
|
Incremental Encoder
Body Diameter 120mm
Hollow Shaft Diameter from 40 to 65mm
Cable or Connector
Signals A,B,0 and Complimentary
Up to 50.000 Pulses per Revolution
|
|
AC 110-BiSS/SSI:
Resolution: Singleturn 10 to 17 Bit
Shaft diameter: up to 50 mm
Protection class: IP50 or IP64
Housing diameter: 110 mm
Supply voltage: DC 5 V -5% / +10% or DC 10-30 V
Connection: Cable
RoHS compatible: Yes
|
|
The Models R112S and R112B optical incremental encoders are designed for light industrial
applications that require high resolution in a very small package.
The two models share these features:
- Either shafted or blind-hollow shaft version
- LED illumination for long life (>100,000 hours)
- Differential photo-detectors for signal stability
- Single-board, surface-mount electronics for reliability
- RS-422 differential line driver output for noise immunity
- Zero index signal
- Monolithic integrated ASIC for internally interpolated resolutions up to 8,000
- cycles/rev (32,000 counts/rev)
|
|
MiniCoders are designed for installation in drives as an alternative to the conventional encoders. They are contact-less and are equipped with a magnetic scanning system which, in conjunction with a toothed wheel as measuring scale permits the measurement of rotary motion. This solution is exceptionally space-saving.
Product description for pictured GEL 2442 minicoder:
* Very compact (37.5 x 18.5 mm) for high-precision applications
* Output frequency up to 200 kHz, with reference signal; for motor speeds of up to 70,000 min -1
* "Safety integrated" for Siemens numeric controls
* Compatible with nearly all input interfaces with Sine/Cosine interpolation
|
|
AC 58-Interbus (Hollow shaft):
Resolution: Singleturn 10 to 12 Bit, Multiturn up to 24 Bit
Shaft diameter: hub shaft 9.52 mm, 10 mm, 12 mm
Protection class: IP 64 or IP 67
Housing diameter: 58 mm
Supply voltage: DC10 - 30 V
Connection: Bus cover or cable with Conin
RoHS compatible: Yes
|
|
The new TM 50 and TS 50 series of rotary encoders features an electromagnetic contactless sensing system with Hall elements. The maximum resolution is 13 bits per 360°, the measuring range can be programmed between of 1 to 32768 revolutions. Among many applications in machinery and engineering equipment it can be used for measurement of long displacements in connection with toothed belts and racks, cable type converters, friction wheels and spindle drivers.
The housing is either in aluminium or stainless steel for use under water and within aggressive ambiance. Besides CANopen, SSI and PROFIBUS interfaces analogue voltage and current signals as well as additional incremental outputs can be made available. The electronic circuit is completely potted and withstands high shock and vibration stress.
|
|
Low cost rugged encoder 10mm shaft diameter Square mount flange Quadrature output.
This low cost and very rugged size 25 encoder has been designed to suit a wide variety of industrial applications. The unit has a 10mm diameter shaft. A square mounting flange is fitted as standard. A 2M cable is fitted, this enters the unit via a gland situated on the side of the unit. The Output circuit has a push/pull output as standard, signals A, B, output.
• Quadrature output.
• Square mounting flange enables easy mounting.
• Robust heavy duty 10 mm shaft.
• Ideal replacement for mechanical counters when used in conjunction with a suitable electronic counter.
|
|
austriamicrosystems provides the world's broadest range of high performance absolute and incremental magnetic encoder ICs, ranging from 8 to 12-bit resolution, with serial digital, PWM and analog outputs.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :