|
|
CO2 incubators with hot air sterilization
BINDER CB series:
Precision equipment for cell cultivation of the future. It has a drift-free infrared CO2 measuring system to ensure stable pH values, condensation-free Permadry™ interior chamber with integrated shelf supports, easy to clean, where the surface area is kept to a minimum in order to reduce potential sites for germs to establish; an effective sterilization program that operates at 180 °C in compliance with standards, for cultivation without any contamination. All of these features along with the absolutely precise temperature accuracy, which you have come to expect from us.
Find out more: www.hot-air-sterilization.com
|
|
|
|
|
|
The Memmert CO2 incubators create absolutely reliable environmental conditions for organic loads. Your decision criteria: 3 model sizes (108l, 153l and 246l); State-of-the-art control technology based on the P performance class for all models; Humidity limit control integrated as standard for all models (active humidity control system at extra charge); Double doors standard for all models: Prevention of contamination and drops in temperature, with at the same time an optimal view of the sensitive load through wide-area interior glass doors; For all models, the working chamber, including the ventilation system, the water trays and all sensors, can be sterilised in a 4-hr programme at 160 °C using the standard STERICard.
For the INCO 2, the tried and tested Memmert heating concept was again perfected: heating the working chamber from all six sides, along with the electronic humidity limit control, is decisive in preventing condensation from forming in the working chamber. An aluminium thermal conduction layer supports the optimal temperature uniformity, and serves as a heat accumulator if there is a temporary power failure. The turbulence-free interior ventilation ensures a constant and uniform atmosphere.
|
|
Microbiological incubators with forced convection
BINDER BF series:
Premium equipment for all gentle incubation applications, including processing large numbers of samples at high throughput. Outstanding dynamics keep the required temperature virtually stable with homogenous distribution, irrespective of how many times the door is opened.
|
|
- Temperature range: from 5°C over ambient temperature up to 80°C maximum.
- 2 versions: air convection or fan circulated incubators.
- Ten sizes: from 18 litres up to 980 liters.
Several options and accessories to adapt the oven to your needs.
|
|
|
The INHECO Incubator MP is an automated and compact incubating position for one standard SBS Microplate. The Incubator MP can be used as a stand-alone device, or stacked to form a tower of up to 6 units. Even stacking of different devices of the Inheco Incubator family in one tower is possible, the devices in the tower can be controlled through the master-slave principle.
|
|
|
|
|
|
INHECO part # 8200010
The INHECO Automated Hotel
is an automated and compact 12 position incubator for standard SBS disposables like Microplates, Half Deep Wells and Deep Well Plates. The Automated Hotel offers quick and direct access to each of the 12 storage positions by automated controlled drawers for loading and unloading. Precise temperature control and drawer positioning sensors guarantee an excellent customer value. The unit is a plug-and-play high performance peltier device.
It is mainly used on or besides robotic platforms and systems in LabAutomation to form a self-contained temperature controlled area for up to 12 Micro or Deep Well Plates. The automated drawer system offers direct and easy access by robotic grippers for loading and unloading and even direct access with pipetting heads. The lid is turning 90° after opening the drawer to enable easy portrait and landscape gripping.
The INHECO Automated Hotel is designed for the use in fundamental research, drug discovery, clinical research and diagnostics in the life science market. The Automated Hotel is tested for the operation with a large number of established LabAutomation systems, primarily:
Caliper: Sciclone, Twister
Hamilton: Star, iSWAP
Perkin Elmer: Janus, Multiprobe II
Product Article No. Dimension W x D x H (mm) Weight (kg) Temperature Range
Automated Hotel 8200010
|
|
|
|
|
|
Refrigerated table and floor incubators WPLR Series.
Incubators for biomedical and scientific laboratories with digital electronic heating and refrigeration control.
WPLR incubators are meant for the conservation of biological and non-biological material at controlled temperatures and are indispensable every time a constant ambient temperature must be created for biological experiments in medicine, for environmental protection analyses, in sanitary and epidemic prevention, in the agri-food, chemical and pharmaceutical industry and in scientific research in general. The incubators can be used for the growth of microorganisms, for germ and mould cultivation, for storage of serums and biological material in general, for the determination of the BOD in water analysis, and for the cultivation and growth of vegetal organisms. Therefore they are used in all hospital laboratories, in laboratories for scientific research, for chemical and clinical analyses, and in the quality control activities of agri-food, pharmaceutical and chemical industries.
All models are designed and built according to the ISO 900:000 International Quality System and created in accordance with CE Mark European safety standards and UNI-EN-600 for laboratory equipment.
|
|
Our I incubators are ideal for all applications with temperatures up to 70 °C - specifically for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, a valuable load is therefore warmed up particularly carefully. To minimise the danger of samples drying out we have designed our heating concept so that an optimum temperature uniformity in the working chamber can also be achieved without forced air circulation, just using natural convection. Your decision criteria: 7 model sizes (32l to 749l); 3 performance classes Basic/Excellent/Perfect; Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature.
|
|
INHECO offers several automated incubators for heating, cooling and shaking of various laboratory disposables in an enclosed environment.
INHECO's Incubators are automated and compact single incubating positions for the use in fundamental research, drug discovery, clinical research and diagnostic applications. The incubators can be used as stand-alone devices or stacked to form a tower. The flexible design of the incubator family allows even stacking of different devices in one tower. The unique vibration reduced shaking principle offers free programmable shaking curves (orbital, linear, eight, elliptic, etc) and amplitudes. The precise automated drawer system guarantees a direct and easy access by robotic grippers and pipetting heads.
|
|
Excellent controllability, extremely small control fluctuations, low-vibration operation and impressive energy savings provide the added value from this perfect adaptation of Peltier technology. Memmert holds the leading position in this technologically sophisticated market segment. Your decision criteria for the IPP models: 4 model sizes (32l to 108l); State-of-the-art control technology based on the P performance class for all models; Double doors standard for all models: Prevention of contamination and drops in temperature, with at the same time an optimal view of the sensitive load through wide-area interior glass doors; Forced air circulation ensures rapid energy transport and optimal temperature uniformity.
|
|
Refrigerated microbiological incubators with program controller
BINDER KB series:
KB is the all-rounder for microorganisms. With its wide range of individual programming functions, including a real-time clock function and an enormous temperature span from -10°C to 100°C, it can be used for a broad range of sophisticated applications in laboratories – with minimal dehumidification of specimens and impressive extra performance. The APT.line™ with its electronically controlled preheating chamber ensures rapid recovery times and maximum precision, unaffected by the ambient temperature.
|
|
- Temperature range: from 0°C up to 60°C.
- Six sizes: from 45 litres up to 686 liters.
Several options and accessories to adapt the oven to your needs.
|
|
|
|
|
|
Refrigerator Incubator forced air circulation.
The external structure is made up of electro zinced and plasticized steel sheets. The shelf, internal case and counter chamber for air circulation are in AISI 304 steel. Illumination with the automatic switching on opening the door, moveable supports for resting the shelves and varnished aluminium door with glass thermal panels. The door, with net light of 78x108/h cm., has a key door. Glass door that permits the observation of the platelets, without alteration of the internal T.
WARMING: Is obtained by specific air heaters at low heat regime. The circulation of forced air is assured by a high performance electro respirator.
TERMOREGULATION: With digital electronic regulator with microprocessor functioning via a PID (proportional, integrative, derivative) be it for heating and for refrigeration, in order to have maximum stability of T and finally maximum reliability of the motocompressor. A adjustable safety device against over temperature is present, compliant with the DIN 12880 normative having an independent probe (3.1 protection class), with indication of visual alarm on the panel and exclusion of the warming function, in case of failure.
REFRIGERATION: Is obtained by refrigerator compressor of hermetic type, very silent, endowed with motor saver device. An internal power plug is available, for power supply to the KWAP54-KWAP108.
|
|
If a rapid and precise alternation between heating up and cooling down phases in ramp operation is called for, the Memmert cooled incubators with compressor cooling prove to be in peak form - yet still work extraordinarily quietly. Due to the finely tuned control technology, deviations from the setpoint are reduced to a minimum. This also guarantees the safety of temperature-sensitive living cultures at all times. Your decision criteria: 5 model sizes (53l to 749l)
State-of-the-art control technology based on the P performance class for all models; Double doors standard for all models: Prevention of contamination and drops in temperature, with at the same time an optimal view of the sensitive load through wide-area interior glass doors; Day/night simulation (24-hour cycle) programmable in conjunction with interior lighting (optional); Very good air circulation in the working chamber through sophisticated ventilation technology; Intelligent defrost function.
|
|
|
|
|
|
New Galaxy® Line of CO2 Incubators
New Brunswick Scientific (NBS) announces the introduction of Galaxy® - a new line of advanced CO2 incubators, which improves on our previous incubators with even more standard features, better performance and a wider range of options than before. Galaxy CO2 incubators feature a unique fanless design and seamless one-piece chamber to eliminate potential breeding grounds for contaminants, and high-temperature disinfection (HTD) option to further minimize contamination risk. An innovative sealed inner glass door on 170L models allows viewing access to samples while maintaining environmental stability and minimizing costly CO2 and N2 consumption.
New perforated shelves provide rapid recover after door opening. An advanced oxygen supplementation system option in three control ranges enables specialized hypoxic or hyperoxic conditions to be maintained, ideal for stem cells, oncology or IVF work. In addition to the full-sized170 liter systems, unique personalized-size 48L incubators and a micro-sized 14L unit are offered, ideally suited to isolating stem cells, fertilized eggs, and other critical cultures.
Galaxy incubators come in two model ranges - an R Series with advanced controller, automated 72-hour data logging with trend graph capability, password-protected programmable alarms and greater range of options; and an economical S Series with simple LED display for all standard cell culture applications.
|
|
|
|
|
|
The flexibility you need with the quality you expect from an established world leader in temperature control instrumentation. Ideal for blotting techniques in which RNA and DNA or protein are immobolised onto nylon nitrocellulose filters.
Hybrigene HB-3D
-Temperature range from 10°C above ambient to 80°C
-High capacity which can hold up to 16 mini or 4 large glass tubes
-Flexibility at an affordable price, offering excellent temperature accuracy and uniformity
-The Hybrigene is the compact, stackable alternative to the Hybridiser HB-1D - for when space is important and throughput is not the priority
-Stack up to 3 ovens, saving on valuable laboratory space
Hybridiser HB-1D
-The famous Hybridiser HB-1D is compact, easy to use and provides complete protection from hybridisation hazards
-A temperature range of +10°C above ambient to 100°C
-High capacity which can hold up to 24 mini-tubes or 6 unique large tubes
-Hybridisations can be performed with a minimal volume of 5ml of probe
-Adjustable feet to enable accurate leveling
-Unique double-glazed glass door; quiet and safe, providing durable protection
|
|
Biochrom Thermostar Shaker Incubator
Small bench-top shaker incubator ideal for controlling the incubation of microplate based assays e.g ELISA.
- Wide temperature range from ambient to 45 degrees C.
- Easy to use and control
- Incubates up to 4 microplates
Ideal for laboratories with fluctuating temperature.
This shaker incubator can also be used with test tubes with the optional 56 tube adaptor
|
|
|
|
|
|
Autoflow 5500 Features
The NuAire Incubator Control Electronics is a state-of-the-art microprocessor based control system specifically designed to deliver the precise control requirements for the chamber environment, providing optimum programmable conditions for culture growth. The microprocessor is "user-friendly" with status indicators, LED display of control parameters and a touch control keypad to permit efficient operator entry of data.
Accurate Infrared CO2 Control System
A HEPA filter surrounds the blower on the positive pressure side and continuously cleans the circulated chamber air within the incubator. The HEPA filter uniformly distributes and cleans the air within the chamber at a rate of one complete change per minute.
Fast Recovery Time
Temperatures recovery within the chamber is very quick. For frequent opening and closing of the door, the temperature recovers at a rate of 0.3iC per minute.
Continuous Humidity Supply System
A relative humidity level of 95% is achieved in the incubator by use of the large stainless steel pan filled with distilled water, and placed on the bottom of the chamber. It is necessary to properly set the door and front perimeter heater to reduce condensation within the chamber.
Economical Value
The DH AutoFlow combines reliable, accurate, stable temperature and infrared gas controls with quality and value to meet laboratory performance for optimum growth conditions in the most demanding environments. The DH AutoFlow represents a special Extraordinary Value.
|
|
|
|
|
|
NuAire’s Dual Heat Decontamination (DHD) AutoFlow NU-5510 is the most advanced Incubator for today’s laboratory professional, providing more useable space with a 6.64 (188 liter) cubic foot capacity inner chamber.
The NU-5510 offers dual heat decontamination cycles, 95˚C wet decontamination, and 145˚C dry sterilization cycles. These cycles prove useful for research changes between cell lines and when working with hazardous agents.
NuAire’s NU-5510 Incubator attains constant contamination control by featuring an advanced positive pressure HEPA filtration system, cleaning the chamber air continuously with 99.99% efficiency, which provides an ISO Class 5 (Fed Std 109E Class 100) cell culture environment. Minimizing contamination and employing low-velocity airflow assures the delicate environment needed for culture growth is undisturbed.
Through superior design and technology, the NU-5510 uses Dual Temperature Probes and Digital Infrared Sensor technology to control and maintain the temperature, humidity, and CO2 levels at precisely +/- 0.1%. The CO2 set point recovers up to 5% (+/- 0.2%) within 3 minutes of a door opening.
The NU-5510 decreases maintenance time and costs with front accessible controls and components. Superior value offers better analysis, research, and results; satisfying even the most demanding environments by offering features not found in any other Incubator.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :