|
|
Planar's innovative see-through display technology is ideal for applications that require fresh new look with wide angle and crisp viewing characteristics.
- Perfect for transportation, premier consumer electronics and architectural applications.
- Easy to customize into curved shapes to help bring innovative product designs to life.
With the ALD technology - used in creating Planar's electroluminescent displays - where the layers used to coat the display are extremely thin, it is possible to create transparent layers on the display surface. As there are no liquids involved, the displays can be bent or curved to any imaginable shapes. Demos have been developed on a mirror-surface and other even or uneven surfaces can be made into a display with Planar's unique technology.
Planar's EL display range combines long life time with endurance and great visual performance. Traditionally electroluminescent displays use a non-reflective back electrode, which enables high contrast and over 160-degree viewing angle even in high ambient light. The displays have been designed for the most demanding conditions: extreme temperatures and high vibration environments. The operating temperature range of EL displays is -50 degrees Celsius up to +85 degrees Celsius. Properly mounted they can withstand high shock loads as well as severe vibration found in demanding applications.
|
|
Example:
MONOCOLOUR OUTDOOR DISPLAY ED 40
Technology LEDs
Number of lines 1 to 4 lignes
Brightness Outdoor
Brightness adjustment Yes
Colour Red (option Amber ou Green)
Operating modes 18 modes
Character set 12 types
Built-in animations Yes (100)
Programming mode TC3 programming keyboard or Software
Interface communication RS232, RS485, Ethernet (option)
Temperature probe Yes
Type of case Aluminium, IP 54 RAL 5004
Operating temperature range -10 to +45C
Power supply 230 VAC / 50-60 Hz
Mounting support Wall mount support Included
TECHNICAL SPECIFICATIONS
Pixel diameter 5 mm
Nombre de LEDs par pixel 1
Microprocessor 16 bits
Message capacity 128 kb
Angle viewing +/- 30
Front face Polycarbonate
Baud rate de 2400 38400 Bauds
|
|
At airports and car-parks, production lines and inside buildings, ANKA large displays by Whrle are essential everywhere for rapid and direct information.
Not only do they display text and figures in sizes configurable by the user. Icons and graphics can be displayed clearly, and in many colours too, thanks to the dot matrix LED displays. This considerably increases the attention-getting value.
ANKA large display units are housed in solid enclosures of protection type IP 65.
The modular and flexible system design provides a number of different expansion options:
- LED large displays, single colour (red, green, yellow, or mixed configuration)
- character height 50 mm, up to 15 lines, up to 40 characters per line.
- LED large display units, multi-colour (red, green, orange). Character heights can be altered:
at 120 mm character height : one line display 3-20 characters per line
at 50 mm character height these values are doubled.
|
|
16X2 Character LCD Module
EastRising alphanumeric LCD display module are comprised of groups organized in blocks of 5 x 8 pixels. This arrangement offers an alphanumeric display of up to 40 characters per line to a maximum of 4 lines.
|
|
COG module with white backlit
LCD COG Module
COG module technology is ideal for applications requiring a very thin package. Gold bumped driver IC are bonded directly to the glass edge eliminating the need for an additional PCB, bezel and connector..
|
|
Black Mask Technology
Our design-to-prototype service is available for a modest, one-time tooling cost. Experienced, on-site application engineers work with customers to design the most cost-effective display solution to meet their specific requirements. We generate all drawing and artwork using our custom computer-aided design tool.. EastRising designs custom LCD that display a full range of graphic elements, such as bargraphs, graphic patterns, and symbols (icons).
|
|
1.0 Model: ER49201-1
1.1 Customer-made TN LCD panel
1.2 LCD DimensionF65.0X38.0mm
1.3 LCD View Area:62.0X30.0mm
1.4 LCD Operating Voltage:5.0v
1.5 LCD Type: TN
1.6 Pitch:2.54mm
1.7 Viewing angle:6:00 ofclock
1.8 Operating temp :-20|+70
1.9 Storage temp : -30|+80
2.0 Polarizer Mode:Positive/transmissive
2.1 Connector: PINi36pcsj
2.2 Drive Method:1/4duty 1/3blas
2.3 LCD Thickness :1.1mm
|
|
|
We custom this LCD module for a massage chair company . RGB backlight means the LED backlight with 7 colors which could be controlled by the program. Such module gives applied customer more choices and its cost is economic.
|
|
Intrinsically safe analogue indicators - GSI / BSI series
Located in EX area
Field mounting (IP66) or panel mounting
3 1/2 and 4 1/2 digits display or bargraph
4-20 mA loop powered
Front face programming
Agreement : ATEX II 1G
Options : alarms, backlight, internal calibrator, set point station
|
|
1/8 DIN Advanced Digital
This range consists of rotary pulse, timer interval and up-/down-counting pulse indicators. These indicators with digital input feature a clear and easy-to-use colour-change display and all have an IP66 housing. K3HB series consists of rotary pulse, timer interval and up-/down-counting pulse indicators. Extra functionality can be added using option boards (max. 3): sensor power supply/output (incl. communication and linear voltage output), relay/transistor output (incl. DeviceNet) and event input.
|
|
Symmetricom time displays are designed to provide widely visible time to local or remote areas. Ranging in character size from 0.5 inches to 4 inches high, these displays can be mounted in instrumentation racks, consoles, on ceilings/walls or desktop areas. Our Airborne Time Display is a small and rugged airborne display that can be mounted in a standard aircraft instrument panel.
All of Symmetricom's time code products are available with several optional configurations, and several are capable of displaying countdown time.
|
|
|
The VM500 vibration monitor offers incredible versatility and functionality in a small 1/8 DIN package, for an attractive price. It provides fully scalable 4-20 mA output for your control system, and also includes two form C relays for a variety of uses. The VM500 is available in dis-placement, velocity, acceleration and even temperature models for 10, 100, and 500 mV/g accelerometers and "J" type thermocouples. Options include RMS or Peak display, as well as a wide range of high pass and low pass filters to focus on frequencies of interest.
|
|
ESA Text Terminals are designed
for applications that require an
interface that is easy to use and
program. All of the function keys,
including the 18 supplementary
keys of the VT160W, can be used to
give direct commands like Start and
Stop to the machine.
Main characteristics (model
dependant):
- Alarms, passwords, recipes
- Mathematical functions
- Two drivers run simultaneously
- Serial or parallel printing
- Integrated Profibus-DP and CAN
|
|
LH51/52
Digital Readout Displays
Compact display with numerous functions for milling machines (LH51) and lathes (LH52).
* Selectable display resolution
* Selectable absolute/incremental display
* Linear error compensation
* Reset, preset and recall
* Centerline and bolt hole* calculations
* Datum point memory
* Power loss data memory
* Radius/Diameter selection
* Self-diagnostics
* Direct inch/metric conversion
* 9 Tool Offsets**
* *LH51 only
* **LH52 only
|
|
|
When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs.
|
|
- Input Supply 4-20mA
- Up to 5 Digits of Display Range
- Sensor Drift Compensation at 0%
- Universal AC Supply Voltage
|
|
1.0 LCD Module Outside Dimension.:46.0X36.0X6.4mm
1.1 LCD Viewing Area: 41.80mm X 26.10mm
1.2 LCD Active Area: 39.27mm X 22.83mm
1.3 Dot Matrix : 128 X 64 Dots
1.4 Dot Size:0.29X0.34mm
1.5 Dot Pitch: 0.307X0.357mm
1.6 Drive voltage:3.0V
1.7 LCD Type: STN
1.8 Connector: FPC (25.0mm length)
1.9 Viewing angle:6:00
2.0 Operating temp :-20 0 c to +70 c
2.1 Storage temp : -30 c to +80 c
2.2 Polarizer Mode: Tranflective/Positive
2.3 IC Assembly Type: COG
2.4 Drive method:1/64 Duty
2.5 LCD Thickness :1.1mm
2.6 IC: NT7532 X 1pc
2.7 Backlight: Edge LED backlight with white color
|
|
Small Size COG Module
COG LCD Matrix Module
COG LCD module technology is ideal for applications requiring a very thin package. Gold bumped driver IC are bonded directly to the glass edge eliminating the need for an additional PCB, bezel and connector..
|
|
1.0 LCD Module Model: ERM320240SS-2T
1.1 LCD Module Outside Dimension.:148.0(L)X120.4(W)X21.0(H)mm
1.2 LCD Viewing Area:120.14 (L)X92.14(W)mm
1.3 Dot Matrix: 320X 240Dots
1.4 Dot Size: 0.33X0.33mm
1.5 Dot Pitch :0.36X0.36mm
1.6 Supply voltage: 5.0V
1.7 LCD Type: STN Blue Mode
1.8 Connector: Zebra
1.9 Viewing angle:6:00
2.0 Operating temp : -20c to +70 c
2.1 Storage temp : -30 c to +80 c
2.2 Polarizer Mode :Transmissive /Negative
2.3 IC Assembly Type: COB
2.4 Drive method:1/240 Duty
2.6 Control IC: RA8835P & SED1335
2.7 Backlight: Edge LED backlight with White color
Touch panel is available
|
|
1.0 Module Number: ERC12864FS-12
1.1 LCD Module Outside Dimension.:58.0X41.5X5.0mm
1.2 LCD Viewing Area:54.0 X 31.00mm
1.3 LCD Active Area: 47.33mm X 26.21mm
1.4 Dot Matrix : 128 X 64 Dots
1.5 Dot Size:0.34X0.38mm
1.6 Dot Pitch: 0.37X0.41mm
1.7 Drive voltage:3.0V
1.8 LCD Type: FSTN
1.9 Connector: FPC (25.0mm length)
2.0 Viewing angle:12:00
2.1 Operating temp : -20 c to +70 c
2.21 Storage temp : -30 c to +80 c
2.3 Polarizer Mode: Tranflective/Positive
2.4 IC Assembly Type: COG
2.5 Drive method:1/64 Duty 1/9 Bias
2.6 LCD Thickness :0.7mm
2.7 IC: SPLC501C X 1pc (SPI supporte)
2.8 Backlight: Edge LED backlight with white color.
|
|
Model: ERC12864F7-4
1.0 LCD Module Outside Dimension.:46.0X36.0X6.4mm
1.1 LCD Viewing Area: 41.80mm X 26.10mm
1.2 LCD Active Area: 39.27mm X 22.83mm
1.3 Dot Matrix : 128 X 64 Dots
1.4 Dot Size:0.29X0.34mm
1.5 Dot Pitch: 0.307X0.357mm
1.6 Drive voltage:3.0V
1.7 LCD Type: FSTN
1.8 Connector: FPC (25.0mm length)
1.9 Viewing angle:6:00
2.0 Operating temp :-20 0 c to +70 c
2.1 Storage temp : -30 c to +80 c
2.2 Polarizer Mode: Tranflective/Positive
2.3 IC Assembly Type: COG
2.4 Drive method:1/64 Duty
2.5 LCD Thickness :1.1mm
2.6 IC: NT7532 X 1pc
2.7 Backlight:RGB backlight with 7 colors
|
|
Large Displays for process control
Inputs: 10V, 0-20mA.
Three digits size available : 57, 100 and 250 mm.
From 2 to 5 digits, 1 or 2 displaying sides.
Serial line option (RS232 or RS485) and dual relay output option.
|
|
EAO, the expert in Man-machine Interfaces market a complete range LCD displays being able to be used in multiple applications.
The range of displays proposed by EAO Secme is very complete; the alphanumeric displays start with very simple displays of a line of 8 characters to versions offering 4 lines of 40 characters.
The graphic versions are they also many: since a line of 12 points to versions 320x240 points.
According to the applications and preferences of the customers, the displays can be backlighted or not, of color, used in beaches of wide temperatures...
Do not hesitate to contact us to obtain more information over this product range.
|
|
FEATURES
- Lighted, supertwist, 20x4, LCD display.
A wide-temp LCD display or a vacuum-fluorescent display (VFD)
are available as options.
- 24- or 40-key keypads with software-controlled shift and
status LEDs.
- EIA-232, EIA-422, EIA-485 or 5-volt Buffered serial interfaces. Each interface supports software handshaking.
- 512 Kbytes (1024 Kbytes optional) of nonvolatile flash memory; 256 Kbytes (768 Kbytes optional) available for user program and data storage.
- Handheld with battery back housing
- Meets NEMA-12/13 requirements.
- User-programmable operator interface terminal for applications where
a dumb terminal is not suitable.
- Simple, but powerful BASIC programming language allows you to easily
add custom functions to the terminal.
- An optional real-time clock can be purchased to execute elapsed-time
or time-of-day event code and timedate stamping.
- An optional secondary serial port is available. Communication through
this port is controlled by your software.
- The QTERM-R55 uses a switching regulator and operates from 8 to 32
VDC.
|
|
TYPE: LCD-COG-module LCD-DATA:FSTN-mode transflective / positiv graphic
BACKLIGHT: LED edge amber CONTROLLER: SSD1815 ; FEATURES: COG module with special shaped glass + special shaped FPC ; REFERENCE NO. 123 ; TYPE: LCD-module LCD-DATA:FFSTN-mode transmisive / negative
alphanumeric + segment BACKLIGHT: bicolor LED red and yellow-green
CONTROLLER: KS0066 FEATURES: LCD + Backlight + tact switches +
customers circuitry REFERENCE NO. 090
|
|
Digital Indicating Devices Type 800
mbar / bar with 2 limit values
The indicating devices type series 800.8 without setpoint and 800.7 with 2 setpoints serve for indicating values. Input signals can be signal current or voltages originating from corresponding measurement transducers or measurement value acquisition systems. The 4 character indicating devices additionally, generate a current signal of for further signal evaluations. A limit value output with two independently no-volt bistable contacts is additionally integrated.
|
|
The DM- 100 Digital Load meter displays motor load. The DM-100 can be adjusted to read the motor load in :
- Percent 0 - 100%
- Horsepower
- kW or W
The input for motor load indication comes from the analog output of a Load Controls, Inc. Load Control or from a LCI Powel Cell power transducer
.
|
|
ES-8 & ES-10 series
Model(2 axis and 3 axis)
ES-10S (simple), ES-10M (miller), ES-10B (borer), ES-10G (grinder),
ES-10L (lather), ES-10E (EDM), ES-10W(wirecut), ES-10P (projector),
ES-10T (tool setter)
Basic functions:
Clear zero
Centering (1/2)
In/mm display
Coordinate entry
Abs/inc switch
Power off memory
199 subdatum
REF memory
Reselution switch bettween 0.001mm, 0.005mm, 0.0001mm, 0.0005mm, 0.01mm, 0.005mm
Special functions:
Built in calculator
PCD pitch circle diameter
LHOLE linear hole positioning
INCL inclined machining
SHRINK shrinkage calculation
R (simple R & smooth R) function
Linear error & non-linear error compensation
Vibration filtering
Rotary encoder readout
State of the Art Electronics Technology
High noise immunity EMC design
Robust Casing, Chromium Plated Panel
The front plate of the ES-8 is built by an 1.5mm thickness electroplated steel, the back cover is built by 3.5mm thickness high strength ABS plastic injection case to provide a high quality robust casing. Front panel is Chromium plated for easy cleaning.
Adaptable to poor electrical source Low power consumption approach is used in the system design of ES-8, therefore, even ES-8 is designed for very wide voltage supply range ( 160V~260V / 80V ~ 130V ) operation, linear power supply can still be used without serious heat generation, linear power supply offer execellent noise immunity and proven highest reliability.
Use of the combined capacitor-varistor noise filters in the power supply system to ensure highest possible noise and surge immunity to poor electrical source.
|
|
TN, STN, FSTN Technologies
For segmented or alphanumeric / graphic displays; TN with colour segments and background other than B/W ;CSTN, TFT technologies
For graphic displays up to 5'' diagonal size
|
|
|
